A fine-grained (of the order of 250 – 500 nm), dense (5.93 g/cm3), strong ceramic with microhardness Hv = 8.2 GPa, compressive strength σr = 0.4 GPa, and Young’s modulus E = 140 GPa was produced, by means of spark plasma sintering (SPS), using nickel oxide nanopowder. The resulting ceramic sample was nickel oxide NiO (73-1519) with a cubic structure, space group Fm3m (No. 225), and lattice size a = 4.168 Å.
Similar content being viewed by others
References
I. I. Moiseev, D. M. Klimov, B. V. Spitsyn, et al., “Discussion of problems of nanotechnology,” Vest. Ross. Akad. Nauk, 73(7), 429 – 449 (2003).
Zhou Xinzhang, Dustin M. Hulbert, Joshua D. Kuntz, et al., “Superplasticity of zirconia-alumina-spinel nanoceramic composite by spark plasma sintering of plasma sprayed powders,” Mater. Sci. Eng. A, 39, 353 – 359 (2005).
V. N. Antsiferov and V. E. Perelman, Mechanics of Pressing of Powder and Composite Materials [in Russian], Graal’, Moscow (2001), pp. 175 – 202.
V. F. Petrunin [Chief Editor], et al., Abstracts of 5th All-Russian Conf. on the Physical Chemistry of Ultra-Disperse Systems, October 9 – 13, 2000, Ekaterinburg [in Russian], MIFI, Moscow (2000).
Nanoparticles, Nanostructures & Nanocomposites: Topical Meeting of the European Ceramics Society, July 5 – 7, 2004, St. Petersburg; Book of Abstracts, St. Petersburg (2004).
Nanostructures: Physics and Technology: Proceedings of 16th International Symposium, June 25 – 29, 2007, Novosibirsk, Ioffe Institute, St. Petersburg (2007).
V. I. Lysenko, “Ceramic from chromium oxide nanopowder: production and properties,” Fiz. Khim. Stekla, 44(3), 263 – 266 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 1, pp. 12 – 15, January, 2022.
Rights and permissions
About this article
Cite this article
Lysenko, V.I. Production and Properties of Ceramic Made From Nickel Oxide Nanopowder. Glass Ceram 79, 9–10 (2022). https://doi.org/10.1007/s10717-022-00444-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-022-00444-x