S. Chen, X. Shu, F. Luo, H. Dong, C. Xu, B. Li, D. Shao, and X. Lu, “Rapid vitrification of simulated Sr2+ radioactive contaminated soil for nuclear emergencies,” J. Radioanal. Nucl. Chem., 319, 115 – 121 (2019); https://doi.org/10.1007/s10967-018-6313-3.
J. Dragun, “Geochemistry and soil chemistry reactions occurring during in situ vitrification,” J. Hazard. Mater., 26, 343 – 364 (1991); https://doi.org/10.1016/0304-3894(91)85029-M.
H. Tang, Y. Li, W. Huang, S. Chen, and X. Lu, “Chemical behavior of uranium contaminated soil solidified by microwave sintering,” J. Radioanal. Nucl. Chem., 322, 2109 – 2117 (2019); https://doi.org/10.1007/s10967-019-06835-9.
S. Gin, P. Jollivet, M. Tribet, S. Peuget, and S. Schuller, “Radionuclides containment in nuclear glasses: an overview,” Radiochim. Acta, 105, 927 – 959 (2017); https://doi.org/10.1515/ract-2016-2658.
Guilin Wei, Minghe Shi, and Chen Xu, “Mechanical and leaching properties of neodymium-contaminated soil glass-ceramics,” J. Am. Ceram. Soc., 104(6), 2521 – 2529 (2021); https://doi.org/10.1111/jace.17713.
C. Prakash, S. Singh, A. Basak, G. Królczyk, A. Pramanik, L. Lamberti, and C. I. Pruncu, “Processing of Ti50Nb50–xHAx composites by rapid microwave sintering technique for biomedical applications,” J. Mater. Res. Technol., 9(1), 242 – 252 (2020).
M. Oghbaei and O. Mirzaee, “Microwave versus conventional sintering: A review of fundamentals, advantages and applications,” J. Alloys Compd., 494, 175 – 189 (2010); https://doi.org/10.1016/j.jallcom.2010.01.068.
S. Zhang, Y. Ding, X. Lu, X. Mao, and M. Song, “Rapid and efficient disposal of radioactive contaminated soil using microwave sintering method,” Mater. Lett., 175, 165 – 168 (2016); https://doi.org/10.1016/j.matlet.2016.04.018.
S. Zhang, X. Shu, S. Chen, H. Yang, C. Hou, X. Mao, F. Chi, M. Song, and X. Lu, “Rapid immobilization of simulated radioactive soil waste by microwave sintering,” J. Hazard. Mater., 337, 20 – 26 (2017); https://doi.org/10.1016/j.jhazmat.2017.05.003.
X. Shu, Y. Li, W. Huang, S. Chen, C. Xu, S. Zhang, B. Li, X. Wang, Q. Qing, and X. Lu, “Rapid vitrification of uraniumcontaminated soil: Effect and mechanism,” Environ. Pollut., 263 (2020); https://doi.org/10.1016/j.envpol.2020.114539.
X. Shu, S. Chen, W. Huang, B. Li, and X. Lu, “Immobilization of simulated An4+ in radioactive contaminated clay via microwave sintering,” Mater. Chem. Phys., 254, 123534 (2020); https://doi.org/10.1016/j.matchemphys.2020.123534.
G. Wen, K. Zhang, H. Zhang, Y. Teng, and Y. Zhou, “Immobilization and aqueous durability of Nd2O3 and CeO2 incorporation into rutile TiO2,” Ceram. Int., 41, 6869 – 6875 (2015);. https://doi.org/10.1016/j.ceramint.2015.01.137.
A. H. Naik, S. B. Deb, A. B. Chalke, et al. “Microwave-assisted low temperature synthesis of sodium zirconium phosphate (NZP) and the leachability of some selected fission products incorporated in its structure – A case study of leachability of cesium[ J],” J. Chem. Sci., 122(1), 71 – 82 (2010); https://doi.org/10.1007/s12039-010-0009-8.
ASTM C1285-14, Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT), ASTM International, West Conshohocken, PA, 2014.
N. Raje, D. K. Ghonge, G. V. S. Hemantha Rao, and A. V. R. Reddy, “Impurity characterization of magnesium diuranate using simultaneous TG–DTA–FTIR measurements,” J. Nucl. Mater., 436, 40 – 46 (2013); https://doi.org/10.1016/j.jnucmat.2013.01.289.
John Adams, “Advances in the characterization of industrial minerals,” Elements, 6, 128 (2011).
K. Aasly, Properties and Behavior of Quartz for the Silicon Process, Thesis for the Degree of Philosophiae Doctor, Norwegian University of Science and Technology, Faculty of Engineering Science and Technology, Department of Geology and Mineral Resources Engineering (2008).
M. Karhu, J. Lagerbom, S. Solismaa, M. Honkanen, A. Ismailov, M.-L. Räisänen, E. Huttunen-Saarivirta, E. Levänen, and P. Kivikytö-Reponen, “Mining tailings as raw materials for reaction- sintered aluminosilicate ceramics: Effect of mineralogical composition on microstructure and properties,” Ceram. Int., 45, 4840 – 4848 (2019); https://doi.org/10.1016/j.ceramint.2018.11.180.
Y. Guo, Y. Li, F. Cheng, M. Wang, and X. Wang, “Role of additives in improved thermal activation of coal fly ash for alumina extraction,” Fuel Process. Technol., 110, 114 – 121 (2013); https://doi.org/10.1016/j.fuproc.2012.12.003.
X. Shu, Y. Li, W. Huang, S. Chen, C. Xu, S. Zhang, B. Li, Y. Wang, X. Wang, Q. Qing, and X. Lu, “Solubility of Nd3+ and Ce4+ in co-doped simulated radioactive contaminated soil after microwave vitrification,” Ceram. Int., 46, 6767 – 6773 (2020); https://doi.org/10.1016/j.ceramint.2019.11.167.
M. A. Vicente-Rodríguez, M. Suarez, M. Angel, and J. D. D. Lopez-Gonzalez, “Comparative FT-IR study of the removal of octahedral cations and structural modifications during acid treatment of several silicates,” Spectrochim. Acta. Part A. Molecular & Biomolecular Spectroscopy, 52, 1685 – 1694 (1996); https://doi.org/10.1016/S0584-8539(96)01771-0.
L. Y. Liang, Z. M. Liu, H. T. Cao, and X. Q. Pan, “Microstructural, optical, and electrical properties of SnO thin films prepared on quartz via a two-step method,” ACS Appl. Mater. Interfaces, 2, 1060 – 1065 (2010); https://doi.org/10.1021/am900838z.
L. Vidal, E. Joussein, M. Colas, J. Cornette, J. Sanz, I. Sobrados, J. L. Gelet, J. Absi, and S. Rossignol, “Controlling the reactivity of silicate solutions: A FTIR, Raman and NMR study,” Colloids Surf., A: Physicochem. Eng. Aspects, 503, 101 – 109 (2016); https://doi.org/10.1016/j.colsurfa.2016.05.039.
S. A. Macdonald, C. R. Schardt, D. J. Masiello, and J. H. Simmons, “Dispersion analysis of FTIR reflection measurements in silicate glasses,” J. Non-Cryst. Solids, 275, 72 – 82 (2000); https://doi.org/10.1016/S0022-3093(00)00121-6.
L. Truffault, M. T. Ta, T. Devers, K. Konstantinov, V. Harel, C. Simmonard, C. Andreazza, I. P. Nevirkovets, A. Pineau, and O. Veron, “Application of nanostructured Ca doped CeO2 for ultraviolet filtration,” Mater. Res. Bull., 45, 527 – 535 (2010); https://doi.org/10.1016/j.materresbull.2010.02.008.
H. Zhu, F. Wang, Q. Liao, et al. “Structure features, crystallization kinetics and water resistance of borosilicate glasses doped with CeO2[J],” J. Non-Cryst. Solids, 518, 57 – 65 (2019); https://doi.org/10.1016/j.jnoncrysol.2019.04.044.
Y. J. Li, J. X. Liu, and D. H. He, “Catalytic synthesis of glycerol carbonate from biomass-based glycerol and dimethyl carbonate over Li–La2O3 catalysts,” Appl. Catal., A, General, 564, 234 – 242 (2018); https://doi.org/10.1016/j.apcata.2018.07.032.
A. Wahid, A. M. Asiri, and M. M. Rahman, “One-step facile synthesis of Nd2O3/ZnO nanostructures for an efficient selective 2,4-dinitrophenol sensor probe,” Appl. Surf. Sci., 487, 1253 – 1261 (2019); https://doi.org/10.1016/j.apsusc.2019.05.107.
B. Glorieux, R. Berjoan, M. Matecki, A. Kammouni, and D. Perarnau, “XPS analyses of lanthanides phosphates,” Appl. Surf. Sci., 253, 3349 – 3359 (2007); https://doi.org/10.1016/j.apsusc.2006.07.027.
M. I. Ojovan and W. E. Lee, “Glassy wasteforms for nuclear waste immobilization,” Metall. Mater. Trans. A, 42, 837 – 851 (2011).