The thermal spalling resistance of a glass coating on a pipe in the petrochemical industry was investigated. It was found that the thermal spalling resistance of a glass coating on a pipe degrades sharply with increasing thickness of the coating. This phenomenon is associated with an increase of the temperature gradients on heating or cooling of thick coatings as compared with thin coatings on pipes. It was determined that the high thermal spalling resistance of a glass coating on a pipe depends primarily on the thickness, brand, and geometric dimensions of the coating and the steel pipe.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
N. Yu. Ibragimov, Influence of the Thermal Conductivity of Enameled Coatings on the Heat Resistance of Pipes [in Russian], Prom. Energetika, Moscow (2010), pp. 44 – 47.
N. Yu. Ibragimov and E. N. Ismaiylova, “Thermal conductivity of layers of deposits of scale and corrosion products on enamel coatings of pipes on using sea water,” Energetika, No. 5, 54 – 56 (2013).
D. M. Rudnov and R. Z. Sakhobutdinov, “Testing of physical methods of preventing the formation of scale,” Oborud. Tekhnol. Neftegaz. Kompl., No. 6, 26 – 30 (2012).
A. Petzold and G. Peshman, Enamel and Enameling [in Russian], Metallurgiya, Moscow (1990).
N. Yu. Ibragimov, “Effect of surface roughness on the temperature drop in glass-enamel pipe coatings,” Prom. Energ., No. 4, 33 – 35 (2013).
Yu. V. Alekseev, “Selecting corrosion-resistant pump-compressor pipes appropriate to field conditions,” Inzh. Praktika, No. 1, 64 – 71 (2012).
V. N. Ivanovskii, “Corrosion of downhole equipment and methods of protecting against it,” Korroziya Territorii Neft’-Gaza, No. 1, 50 – 59.
A. B. Lazarev, “Basic methods of combating corrosion of oilfield equipment,” Inzh. Praktika, No. 8, 18 – 20 (2011).
D. Brondel, R. Edwards, and A. Hayman, “Corrosion in the oil industry,” Oilfield Rev., 6(2), 4 – 18 (1994).
N. Yu. Ibragimov, “Heat resistance and strength of the silicate coating of pipe,” Chem. Petroleum Eng., 52(1 – 2), 48 – 49 (2016).
V. S. Alexandrov, A. G. Dorofeev, and N. Yu. Ibragimov, “Investigation of the corrosion resistance of glass-lined pipes and pipelines,” Korr. Zashch. Neftegaz. Prom-sti, No. 1, 14 – 17 (2001).
N. Yu. Ibragimov, “Glass coating deposition temperature on the inner surface of heat-exchange tube,” Steklo Keram., No. 6, 30 – 32 (2019); N. Yu. Ibragimov, “Glass coating deposition temperature on the inner surface of heat-exchange tube,” Glass Ceram., 76(5 – 6), 225 – 227 (2019).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 3, pp. 40 – 42, March, 2020.
Rights and permissions
About this article
Cite this article
Ibragimov, Y.N. Thermal Spalling Resistance of Glass Coatings on Pipes. Glass Ceram 77, 113–115 (2020). https://doi.org/10.1007/s10717-020-00251-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-020-00251-2