The deposition temperature of a glass coating on the inner surface of a heat-exchanger tube was studied. The choice of coating deposition temperature depends on the physico-mechanical properties, geometric dimensions, and temperature distribution at any point of the coating and the metallic part of the heat-exchange tube. The variation of the deposition temperature field of glass coatings on the inner surface of a tube as a function of the heating time of the electric-heating furnace is determined theoretically. It is found that during deposition of a glass coating on the inner surface of the tube the temperature largely depends on the brand and thickness of the sealed glass rod.
Similar content being viewed by others
References
A. M. Pettsol’d and G. N. Peshman, Enamels and Enameling [in Russian], Metallurgiya, Moscow (2010).
M. A. Mikheev and I. M. Mikheeva, Principles of Heat Transfer [in Russian], Énergiya, Moscow (2011).
N. Yu. Ibragimov, “Distribution of the temperature of softened glass coating on pipe surfaces,” Teploenerg., No. 6, 65 – 68 (1998).
N. Yu. Ibragimov and E. N. Ibragimova, “Study of geometric parameters of cracks in silicate-enamel coatings of pipes,” Chem. Petroleum Eng., 1, 21 – 23 (2018).
N. Yu. Ibragimov, Glass Coated Pipes in Petroleum Chemistry and Thermal Power Industry, Lambert Academic Publishing RU, Saarbryukken (2016).
N. Yu. Ibragimov and E. N. Ibragimova, “Apparatus for identifying microcracks on the inner surface of glazed pipes,” Steklo Keram., No. 7, 29 – 31 (2018); N. Yu. Ibragimov and E. N. Ibragimova, “Apparatus for identifying microcracks on the inner surface of glazed pipes,” Glass Ceram., 75(7 – 8), 272 – 274 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 6, pp. 30 – 32, June, 2019.
Rights and permissions
About this article
Cite this article
Ibragimov, N.Y. Glass Coating Deposition Temperature on the Inner Surface of Heat-Exchange Tube. Glass Ceram 76, 225–227 (2019). https://doi.org/10.1007/s10717-019-00170-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-019-00170-x