Examples are presented of the successful application of new types of diamond tools for high-efficiency processing of a wide class of materials such as glass, ceramic, sapphire, semiconductor materials, and different metals. The advantages of a bonded diamond tool based on heat-conducting polymer composite are shown.
Similar content being viewed by others
References
M. G. Efros and V. S. Mironyuk, Modern Abrasive Tools [in Russian], Mashinostroenie, Leningrad (1987).
N. V. Novikov, et al. (eds.), Synthetic Superhard Materials, Vol. 2, Super Hard Composite Tool Materials, Naukova dumka, Kiev (1986).
V. V. Rogov, Finish Diamond Abrasive Machining of Non-metallic Parts [in Russian], Naukova dumka, Kiev (1985).
V. S. Kodratenko, Diamond Machining of Materials [in Russian], Mashinostroenie, Moscow (2014).
V. S. Kodratenko, Grinding Tool and Mix for Its Fabrication [in Russian], Published June 27, 2000.
V. Kondratenko, and N. I. Kobshyn, Polishing Tool and Composition for Producing Said Tool, Pat. 6,875,099 USA, publ. April 5, 2005.
V. S. Kondratenko, N. I. Kobshyn, and A. Yu. Rogov, “Grinding and polishing by a different method,” RITM, No. 1, 34 – 40 (2015).
V. S. Kondratenko and N. I. Kobshyn, “Grinding-polishing tool,” Instrumental’nyi Mir, No. 1(30), 24 – 25 (2009).
V. S. Kondratenko, Yu. V. Korlyarov, E. M. Aliferkina, et al., “Machining of silicon substrates by bonded diamond tool,” Pribory, No. 7, 36 – 38 (2005).
V. S. Kondratenko and A. V. Bobkov, “New technology for machining metal parts for optical instrument engineering by a bonded diamond abrasive tool,” Pribory, No. 12, 47 – 50 (2007).
Bolshoi Encyclopedia of Oil and Gas [in Russian], URL: https://www.ngpedia.ru/id245023p1.html.
V. S. Kondratenko, Yu. I. Sakunenko, and D. A. Burlai, “Trans-energy-plastics and their innovation potential,” Vest. MGTU MIREA, 2[3(8)], 12 – 21 (2015).
V. S. Kondratenko, P. D. Gindin, D. A. Burlyai, et al., “New diamonds tool for machining optical materials,” Opt. Zh., 84(6), 54 – 57 (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 5, pp. 39 – 43, May, 2018.
Rights and permissions
About this article
Cite this article
Kondratenko, V.S. High-Efficiency Materials-Processing Technology Based on New Types of Diamond Tools. Glass Ceram 75, 202–205 (2018). https://doi.org/10.1007/s10717-018-0055-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-018-0055-0