The factors affecting the sintering process for quartz ceramic are examined. The dependence of the post-firing density of blanks on the properties of the quart glass based slip is analyzed. It is proposed that the content of the highly disperse SiO2 particles in the slip affects the properties of the ceramic material. The concept of a colloidal component is described. The particle-size distribution in the colloidal component is analyzed.
Similar content being viewed by others
References
G. M. Solomin and G. M. Tomilov, “Investigation of the kinetics of sintering of glassy silicon dioxide,” Neorg. Mater., 6(10), 1853 – 1856 (1970).
E. I. Suzdal’tsev, A. S. Shatalin, and M. Yu. Rusin, “ Accelerated firing of articles made from quartz ceramic,” Aviats. Prom-st’, No. 5, 70 (1989).
Yu. E. Pivinskii, “On stabilization and aging of ceramic suspensions,” Ogneupory No. 8, 15 – 22 (1983).
Yu. E. Pivinskii, P. V. Dyakin, Ya. Yu. Pivinskii, and S. V. Vikhman, “Nanoparticles and their effectiveness in the technology of HCBS and ceramic concretes, Pt. 1,” Novye Ogneupory, No. 8, 34 – 39 (2003).
Yu. E. Pivinskii, “Highly concentrated ceramic binders of a suspension: disperse composition and porosity of castings,” Ogneupory, No. 4, 17 – 23 (1989).
N. A. Shabanova and P. D. Sarkisov, Principles of the Sol-Gel Technology of Nanodisperse Silica [in Russian], IKTS Akademkniga, Moscow (2004).
R. Iler, Chemistry of Silica [Russian translation], Mir, Moscow (1982).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 5, pp. 24 – 29, May, 2018.
Rights and permissions
About this article
Cite this article
Kharitonov, D.V., Makarov, N.A., Anashkina, A.A. et al. Effect of Highly Disperse SiO2 Particles on the Sintering of Quartz Ceramic: Firing Regime Choice for Quartz Ceramic Articles and the Colloidal Component Concept. Glass Ceram 75, 190–194 (2018). https://doi.org/10.1007/s10717-018-0053-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-018-0053-2