A new approach is proposed for analyzing the efficiency of fume heat recovery. The theoretically attainable temperature of air heating is calculated for a 450 tons/day glassmaking furnace with fume temperature 1450 – 1500°C at the entry and 325 – 450°C at the exit of the checkerwork. The regenerator structural and regime parameters required to heat air to 1300°C are determined.
Similar content being viewed by others
References
V. Ya. Dzyuzer, “Methods for increasing the energy efficiency of glass furnaces,” Steklo Keram., No. 1, 11 – 14 (2012); V. Ya. Dzyuzer, “Methods for increasing the energy efficiency of glass furnaces,” Glass Ceram., 69(1 – 2), 12 – 15 (2012).
V. Ya. Dzyuzer, “Energy-efficient checkerwork structure of a temperature regenerator of a glassmaking furnace,” Novye Ogneupory, No. 2, 3 – 6 (2014).
A. V. Koshel’nik, “Modeling of thermal processes in the packing of regenerative heat exchangers in industrial glassmaking furnaces,” Steklo Keram., No. 9, 10 – 13 (2008); A. V. Koshel’nik, “Modeling of thermal processes in the packing of regenerative heat exchangers in industrial glassmaking furnaces,” Glass Ceram., 65(9 – 10), 301 – 304 (2008).
A. A. Mazura and A. V. Koshelnikov, “Development and analysis of a neural net for predicting the efficiency parameters of the regenerator checkerwork of a glassmaking furnace,” Vost.-Evrop. Zh. Peredovykh Tekhnol., No. 2/8(78), 29 – 33 (2015).
V. Ya. Dzyuzer, Heat Engineering and Thermal Operation of Furnaces [in Russian], Lan’, St. Petersburg (2016).
V. Ya. Dzyuzer, “Boundary conditions for calculating the regenerator and checkerwork brickwork in glassmaking furnace,” Steklo Keram., No. 7, 7 – 10 (2013); V. Ya. Dzyuzer, “Boundary conditions for calculating the regenerator and checkerwork brickwork in glassmaking furnace,” Glass Ceram., 70(7 – 8), 241 – 244 (2013).
V. Ya. Dzyuzer, “Basis for the development of a three-cycle regenerator for a glassmaking furnace,” Steklo Keram., No. 5, 20 – 25 (2014); V. Ya. Dzyuzer, “Basis for the development of a three-cycle regenerator for a glassmaking furnace,” Glass Ceram., 71(5 – 6), 162 – 165 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 5, pp. 21 – 24, May, 2017.
Rights and permissions
About this article
Cite this article
Dzyuzer, V.Y., Minin, S.A. & Alikina, K.V. Fume Heat Recovery Efficiency in High-Capacity Glassmaking Furnaces. Glass Ceram 74, 165–168 (2017). https://doi.org/10.1007/s10717-017-9953-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-017-9953-9