The results of a determination of the granulometric composition of lithoidal clayey raw material with different degrees of lithifaction — argillaceous clays, argillites, clayey shales — by means of laser diffractometry are presented. The particulars of the granulometric composition of these rocks as well as the effect of their dispersion duration and intensity are determined. It is shown that laser diffractometry can be used to evaluate the quality of raw materials of this type for the production of different types of ceramic articles.
Similar content being viewed by others
References
V. D. Kotlyar, A. V. Kozlov, A. V. Kotlyar, and Yu. V. Terekhina, “Particulars of lithoidal clayey rock of the eastern Donbas as a raw material for the production of wall ceramic,” Vest. MGSU, No. 10, 95 – 105 (2014).
B. V. Talpa and A. V. Kotlyar, “Mineral raw material resources of lithified fine clayey rock of southern Russia for production of building ceramic,” Stroit. Mater., No. 4, 31 – 33 (2015).
A. V. Kotlyar, “Technological properties argillaceous clay in the production of clinker,” Vest. TGASU, No. 2, 164 – 175 (2016).
V. D. Kotlyar, K. A. Lapunova, Ya. V. Lazareva, and I. M. Usepyan, “Main trends and future raw materials in the production of ceramic tiles,” Stroit. Mater., No. 12, 28 – 31 (2015).
N. T. Andrianov, V. L. Balkevich, A. V. Belyakov, et al., Chemical Technology of Ceramics [in Russian], RIF Stroimaterialy, Moscow (2012).
A. K. Kairakbaev, E. S. Abdrakhimova, and V. S. Abdrakhimov, “Use of non-ferrous metals aluminum-containing technogenic waste in the production of clinker ceramic products,” Steklo Keram., No. 7, 35 – 39 (2016); A. K. Kairakbaev, E. S. Abdrakhimova, and V. S. Abdrakhimov, “Use of non-ferrous metals aluminum-containing technogenic waste in the production of clinker ceramic products,” Glass Ceram., 73(7 – 8), 266 – 269 (2016).
V. A. Ezerskii, “Clinker: technology and properties,” Stroit. Mater., No. 4, 79 – 81 (2011).
A. V. Kotlyar, B. V. Talpa, and Ya. V. Lazareva, “Particulars of chemical composition of clays and argillites,” Stroit. Mater., No. 4, 10 – 14 (2016).
V. A. Kondratenko, Ceramic Wall Materials: Optimization of Their Physical and Technical Properties and Technological Production Parameters [in Russian], Kompozit, Moscow (2005).
G. N. Fedotov, E. V. Shein, V. I. Putlyaev, et al., “Physical-chemical differences of the sedimentometric and laser-diffraction methods of determining particle size distribution,” Pochvovedenie, No. 3, 310 – 317 (2007).
A. Blokhin and S. P. Kulizhskii, “Evaluation of the application of laser idffractometry in the determination of the granulometric composition of soil,” Vest. Tomsk. Gos. Univ., Biologiya, No. 1, 37 – 43 (2009).
S. P. Kulizhskii, N. G. Koronatova, S. Yu. Artymuk, et al., “Comparison of sedimentometry and laser-diffraction in determining the granulometric composition of solid of natural and technogenic landscapes,” Vest. Tomsk. Gos. Univ., Biologiya, No. 4 (12), 21 – 31 (2010).
A. V. Kotlyar and A. V. Kozlov, “Classification of lithoidal clay raw materials by the degree of soaking,” in: High-Priority Problems of Construction, the Construction Industry, and Industry: Proc. of the 17th International Scientific and Technical Conference [in Russian], TGU, Tomsk (2016), pp. 79 – 80.
G. Lagaly, “Colloid clay science,” in: Handbook of Clay Science. Vol. 1, Developments in Clay Science, Elsevier Ltd., Amsterdam (2006), pp. 141 – 245.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 4, pp. 21 – 27 April, 2017.
Rights and permissions
About this article
Cite this article
Kotlyar, V.D., Kozlov, A.V. & Kotlyar, A.V. Granulometric Composition Particulars of Lithoidal Clay Raw Material as Determined by Laser Diffraction. Glass Ceram 74, 131–136 (2017). https://doi.org/10.1007/s10717-017-9946-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-017-9946-8