The role of technological trends in the technologies used to increase product quality in real ceramic production is examined for the example of a unified principle of optimization. It is shown that the uniformity of the final microstructure of a polycrystalline material depends on the probability of reaching the requirements imposed by the principle of optimization on process stages such as synthesis and the formation and sintering of blanks. Ways to increase the quality and profitability of the manufacture of ceramic products intended for use under extreme conditions are examined for the example of the components of nuclear fuel.
Similar content being viewed by others
References
S. O. Kramarov, L. M. Katsnelson, T. K. Kusnetsova, et al., “Systemic approach as a method for controlling properties of polycrystalline ceramic materials,” Ferroelectricity Newsletter Fall., 6(4) (1988).
L. M. Katsnel’son, Nature of the Memory Effect of the Disperse-Crystalline State in a Piezoelectric Ceramic, Author’s Abstract of Candidate’s Thesis [in Russian], Rostov-on-Don (1996).
L. M. Katsnel’son and E. S. Tsikhotskii, “Method of solid-phase synthesis of oxide materials and setup of continuous synthesis for its implementation, RF Patent No. 2344107 C1, C04B 35_64, C04B 35_626, F27B1_09,” Byull. Izobr. Polezn. Modeli, No. 2 (2009), published January 20, 2009.
L. M. Katsnel’son and B. M. Kerbel’, “Continuous solid-phase synthesis of ultra- and nanostructural powders of oxide materials for the production of high-quality functional ceramics,” Tsvetn. Met., No. 1, 70 – 74 (2012).
L. M. Katsnel’son and B. M. Kerbel’, “Production of technologically equilibrium oxide functional materials with elevated electrophysical parameters,” Yuzhno-Sibirskii Nauchnyi Vest., No. 1(3), 34 – 46 (2013); URL: http:__s-sibsb.ru_images_articles _2013_1_8 34-46.pdf; ISSN 2304-1943.
L. M. Katsnel’son and B. M. Kerbel’, “Determination of the optimal uniaxial pressing pressure for ceramic powders,” Steklo Keram., No. 9, 8 – 13 (2014); L. M. Katsnel’son and B. M. Kerbel’, “Determination of the optimal uniaxial pressing pressure for ceramic powders,” Glass Ceram., 70(9 – 10), 319 – 323 (2014).
S. O. Kramarov, A. V. Beliayev, A. A. Grekov, and L. M. Katsnelson, “Strengths characteristic and microstructure of some piezoceramic composites,” Ferroelectrics, 68(1 – 4), 45 – 52 (1986).
B. M. Kerbel’ and L. M. Katsnel’son, “Rapid method of sintering oxide functional ceramic,” Vestn. Nats. Issled. Yadernogo Univ. MIFI, 3(1), 1 – 7 (2014).
Development, Production, and Operation of the Fuel Elements of Power Reactors [in Russian], Énergoatomizdat, Moscow (1995).
V. F. Petrunin, V. B. Malygin, A. V. Fedotov, and V. V. Shilov, Method of Fabricating Ceramic Fuel Elements for Nuclear Reactors, RF Patent No. 2186431, C01GG21C [in Russian], published July 27, 2002.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 1, pp. 14 – 19, January, 2016.
Rights and permissions
About this article
Cite this article
Kerbel’, B.M., Katsnel’son, L.M. Technological Trends in the Optimization of Standard Procedures in the Production of High-Quality Oxide Functional Materials. Glass Ceram 73, 14–18 (2016). https://doi.org/10.1007/s10717-016-9816-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-016-9816-9