Experimental data on the determination of the creep rupture strength (time and strain to rupture) of densely sintered periclase ceramic at temperatures to 1600°C under loads 20 – 50 MPa are presented. It is shown that the durability of materials can be determined from measurements of the rate of steady creep below the rupture level.
Similar content being viewed by others
References
F. Garofalo, Fundamentals of Creep and Creep-Rupture in Metals [Russian translation] Metallurgiya, Moscow (1968).
V. S. Bakunov, E. S. Lukin, and E. P. Sysoev, “Particulars of strain and rupture of polycrystalline oxide ceramic at temperatures to 1600°C,” Steklo Keram., No. 11, 11 – 16 (2011); V. S. Bakunov, E. S. Lukin, and E. P. Sysoev, “Creep–rupture characteristics of polycrystalline oxide ceramic to 1600°C,” Glass Ceram., 68(11 – 12), 357 – 362 (2011).
V. S. Bakunov, E. S. Lukin, and E. P. Sysoev, “Particulars of creep of polycrystalline oxide ceramic at temperatures to 1600°C,” Steklo Keram., No. 2, 25 – 28 (2012); V. S. Bakunov, E. S. Lukin, and E. P. Sysoev, “Particulars of polycrystalline oxide ceramic creep at temperatures to 1600°C,” Glass Ceram., 69(1 – 2), 61 – 64 (2012).
V. S. Bakunov, “High-temperature creep of refractory ceramic: particulars of the process,” Ogneupory, No. 12, 4 – 7 (1994).
V. S. Bakunov and A. V. Belyakov, “Creep and structure of ceramics,” Neorg. Mater., 36(12), 1532 – 1536 (2000).
B. Ya. Pines, “Diffusion and mechanical properties of solids,” Usp. Fiz. Nauk, 76(3), 519 – 556 (1962).
V. S. Bakunov, V. L. Balkevich, A. S. Vlasov, et al., Ceramics from Highly Refractory Oxides [in Russian], Metallurgiya, Moscow (1977).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 6, pp. 16 – 19, June, 2013.
Rights and permissions
About this article
Cite this article
Bakunov, V.S., Lukin, E.S. & Sysoev, É.P. Creep rupture strength of magnesium oxide based dense polycrystalline ceramic at temperatures to 1600°C. Glass Ceram 70, 216–218 (2013). https://doi.org/10.1007/s10717-013-9546-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-013-9546-1