It was shown that developing an energy-efficient design for a bottle glass furnace implies the use of modern design methodology. It is necessary to include mathematical modeling before the technical design stage in the structure of the traditional stages of work on a furnace design. The boundary conditions of modeling must reflect the conjugate character of external and internal heat exchange and the hydrodynamics of the melting tank.
Similar content being viewed by others
References
V. Ya. Dzyuzer, V. S. Shvydkii, and A. S. Shishkin, in: Introduction to Automated Design: A Handbook [in Russian], Izd. UGTU-UPI, Ekaterinburg (2007).
V. Ya. Dzyuzer, “Improving the specifications of glass-melting furnaces,” Steklo Keram., No. 7, 3–12 (2008).
V. Ya. Dzyuzer, V. S. Shvydkii, and V. B. Kut'in, “A mathematical model of a glass-melting furnace with a horseshoe flame,” Steklo Keram., No. 10, 8–12 (2004).
V. Ya. Dzyuzer and V. S. Shvydkii, “A mathematical model of the hydrodynamics in the melting tank of a glass-melting furnace,” Steklo Keram., No. 1, 3–8 (2005).
V. Ya. Dzyuzer and V. S. Shvydkii, “Methodology for adapting a combined mathematical model of hydrodynamics and heat exchange in a glass-melting furnace with a horseshoe flame,” Steklo Keram., No. 12, 7–11 (2006).
V. Ya. Dzyuzer and V. S. Shvydkii, “Effect of the flame length on external heat exchange in a glass-melting furnace with a horseshoe flame,” Steklo Keram., No. 7, 3–7 (2005).
V. Ya. Dzyuzer and V. S. Shvydkii, “Effect of flame length on the hydrodynamics of the melting tank in a glass-melting furnace with a horseshoe flame,” Steklo Keram., No. 9, 5–11 (2005).
V. Ya. Dzyuzer and V. S. Shvydkii, “Effect of the overflow threshold on the hydrodynamics and heat exchange in the melting tank of a glass-melting furnace with a horseshoe flame,” Steklo Keram., No. 7, 6–12 (2006).
V. Ya. Dzyuzer and V. S. Shvydkii, “Effect of melting tank design on heat exchange and melt hydrodynamics in a glass-melting furnace with a horseshoe flame,” Steklo Keram., No. 10, 9–16 (2006).
V. Ya. Dzyuzer, “Methodology of glass-melting furnace design,” in: Proceedings of the II International Congress “Furnace Tube Design: Thermal Conditions, Design, Automation, and Environment” [in Russian], Ekaterinburg (2006), pp. 119–128.
V. S. Meshka, V. I. Ureki, and V. Ya. Dzyuzer, “Experience in revamping the glass-melting furnace,” Steklo Keram., No. 5, 17–20 (2007).
V. Ya. Dzyuzer and V. S. Shvydkii, “Numerical modeling of thermophysical processes in glass-melting furnaces,” in: Proceedings of the III International Congress “Furnace Tube Design: Thermal Conditions, Design, Automation, and Environment” [in Russian], Ekaterinburg (2008), pp. 46–76.
V. Ya. Dzyuzer, “Improvement of the method of calculating the heat balance of a regenerative glass-melting furnace,” Ogneup. Tekh. Keram., No. 3, 24–31 (2006).
V. Ya. Dzyuzer, “Improving the method of calculating the heat balance of a regenerative glass-melting furnace (conclusion),” Ogneup. Tekh. Keram., No. 4, 22–27 (2006).
A. S. Kozlov, Heat Engineering of Regenerative Glass-Melting Furnaces [in Russian], Legprombytizdat, Moscow (1990).
V. Ya. Dzyuzer, “Designing the refractory lining of the melting tank in high-output glass-melting furnaces,” Ogneup. Tekh. Keram., No. 8, 14–22 (2007).
V. Ya. Dzyuzer, “Refractories for the melting part of glass-melting furnaces,” Ogneup. Tekh. Keram., No. 5, 24–32 (2008).
V. Ya. Dzyuzer, “Refractories for the glass-melting furnace regenerator,” Ogneup. Tekh. Keram., No. 6, 23–26 (2008).
Author information
Authors and Affiliations
Additional information
Translated from Steklo i Keramika, No. 9, pp. 5–9, September, 2008.
Rights and permissions
About this article
Cite this article
Dzyuzer, V.Y. Glass melting furnaces designing energy-efficient bottle glass furnaces. Glass Ceram 65, 296–300 (2008). https://doi.org/10.1007/s10717-009-9076-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-009-9076-z