Abstract
The fundamental issues of extending the period between repairs for glass-melting tank furnaces are analyzed. Based on data obtained in studying refractory brickwork after the furnace has been stopped for a cold repair and analyzing the specifics of corrosion of refractories in various structural elements, technical solutions are proposed and implemented enabling one to extend the tank furnace campaign to 7–8 years.
Similar content being viewed by others
References
N. V. Solomin, “The process of erosion of refractories in glass-melting furnaces,” Steklo Keram., No. 12, 13–14 (1949).
O. N. Popov, V. P. Frolova, and V. N. Orlova, “The structure and properties of melted-cast baddeleyite-corundum refractories with 32–34% ZrO2,” Steklo Keram., No. 2, 9–13 (1994).
3._O. N. Popov, V. P. Frolova, and V. N. Orlova, “Structure and properties of melted-cast baddeleyite-corundum refractories with 40–42% ZrO2,” Steklo Keram., Nos. 5–6, 16–19 (1994).
K. Schulte, “Thermische Belastbarkei+von Silikasteinen in der Glasindustrie,” Glastechn. Ber., 46(9), 183–189 (1973).
O. N. Popov and V. P. Frolova, “Service of bacor 33 in the upper structure of the glass-melting furnace,” Ogneupory, No. 11, 50–53 (1985).
V. D. Tokarev, S. S. Ignat’ev, V. I. Litvin, and O. N. Popov, “Hot repair of the burner inlet in the glass-melting furnace,” Steklo Keram., No. 9, 26–27 (1992).
G. Baron, R. Staffolani, V. D. Tokarev, et al., “The hot repair of glass-melting furnace by ceramic welding,” Steklo Keram., No. 11, 27–29 (1990).
O. N. Popov, “Rational use of refractories and optimal design of regenerator checkerwork for glass-melting furnace,” Steklo Keram., No. 10, 9–12 (2002).
Author information
Authors and Affiliations
Additional information
__________
Translated from Steklo i Keramika, No. 5, pp. 19–22, May, 2006.
Rights and permissions
About this article
Cite this article
Tokarev, V.D., Igat’ev, S.S. & Popov, O.N. Analysis of service of refractories in glass-melting tank furnaces. Glass Ceram 63, 154–157 (2006). https://doi.org/10.1007/s10717-006-0064-2
Issue Date:
DOI: https://doi.org/10.1007/s10717-006-0064-2