Abstract
The authors describe the results of developing methods for determining some quality parameters of barium titanate powder, which is the main component in some ceramics that are used to produce capacitors. The degree of transformation of ZnO and BaTiO3, the volume density of sintered powder, the degree of its dissolution in hydrochloric acid, and some diffraction characteristics of BaTiO3 powders are determined according to the developed methods and can predict with a sufficient degree of reliability the quality of ceramic capacitors made from barium titanate powders.
Similar content being viewed by others
References
B. A. Rotenberg, Ceramic Capacitor Dielectrics [in Russian], Girikond, St. Petersburg (2000).
Yu. D. Tret’yakov, Solid-Phase Reactions [in Russian], Khimiya, Moscow (1978).
Yu. D. Tret’yakov and Kh. Lepis, Chemistry and Technology of Solid-Phase Materials [in Russian], Izd-vo MGU, Moscow (1985).
V. N. Antsiferov and V. G. Andreev, Problems of Science of Powder Materials [in Russian], Izd-vo UrO RAN, Ekaterinburg (2003).
I. N. Belyaev and L. N. Aver’yanova, “Solid-phase reactions of titanates of bivalent metals,” Zh. Neorg. Khim., 11, Issue 5, 1183–1188 (196
N. P. Velikaya, E. N. Gindin, and M. A. Kvantov, “Interaction of BaTiO3 with Fe2O3,” Izv. Akad. Nauk SSSR, Ser. Neorg. Mater., 21(2), 296–299 (198
É. A. Gavrilovskaya and A. S. Vlasov, “Sintering of powder mixtures in the system BaTiO3-Bi2O3,” Steklo Keram., No. 4, 18–20 (1983
A. K. Babko and I. V. Pyatnitskii, Quantitative Analysis [in Russian], Vysshaya Shkola, Moscow (1968).
Author information
Authors and Affiliations
Additional information
__________
Translated from Steklo i Keramika, No. 11, pp. 23–25, November, 2005.
Rights and permissions
About this article
Cite this article
Kris’ko, L.Y., Dudchik, G.P. & Bashkirov, L.A. Identification of quality parameters for barium titanate powder. Glass Ceram 62, 361–363 (2005). https://doi.org/10.1007/s10717-006-0008-x
Issue Date:
DOI: https://doi.org/10.1007/s10717-006-0008-x