Abstract
A composite material based on Al2O3 is developed, which contains partly stabilized ZrO2 as the reinforcing component and a eutectic of the system CaO-ZnO-Al2O3-SiO2 as the sintering additive. The use of initial material in the form of aluminum oxide obtained from aluminum hydroxide makes it possible to synthesize a material with average bending strength of 530 MPa at the firing temperature of 1550°C.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
E. S. Lukin, N. A. Popova, and N. I. Zdvizhkova, “Strong ceramics based on alumina and zirconium dioxide,” Steklo Keram., Nos. 9–10, 25–30 (1993
S. V. Orlov, “Chemical factor in liquid-recrystallization sintering of corundum,” Steklo Keram., No. 7, 15–20 (2005
E. S. Lukin, N. A. Makarov, S. V. Tarasova, et al., “New ceramic materials based on aluminum oxide,” Ogneup. Tekh. Keram., No. 7, 2–10 (2001
N. A. Makarov, “Use of additives forming a liquid phase under firing in the technology of corundum ceramics,” Steklo Keram., No. 10, 31–34 (2003
D. S. Rutman, Yu. S. Toropov, S. Yu. Pliner, et al., High-Refractory Materials from Zirconium Dioxide [in Russian], Metallurgiya, Moscow (1985).
Author information
Authors and Affiliations
Additional information
__________
Translated from Steklo i Keramika, No. 11, pp. 16–18, November, 2005.
Rights and permissions
About this article
Cite this article
Makarov, N.A., Sverdlikov, V.L. Composite material of the corundum — zirconium dioxide — sintering additive system. Glass Ceram 62, 352–354 (2005). https://doi.org/10.1007/s10717-006-0005-0
Issue Date:
DOI: https://doi.org/10.1007/s10717-006-0005-0