Abstract
The aim of this paper is to present a method for simultaneous optimization of the design characteristics of an earth retaining structure design using quality tools. The design characteristics examined in this paper are safety factor, total displacements and cost. The methodology for the multi-response optimization used is the desirability analysis which gives the appropriate combinations for the design variables. Through standard experimental runs, we process the results for this optimization. The experimental measurements are calculated via finite elements analysis. The designs used are taken from two real-life case studies. This methodology is intended as a guide tool for civil and geotechnical engineers to predict the values of the design variables as long as they can be named and take discrete values. The uniqueness in this study is that approved experimental methodology can simultaneously optimize the design characteristics of an earth retaining structural design, which were until now calculated empirically.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig1_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig7_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig8_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig9_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10706-013-9649-z/MediaObjects/10706_2013_9649_Fig10_HTML.gif)
Similar content being viewed by others
References
Alshamrani O, Schierle GG, Galal K, Vergun D (2009) Optimal bracing type and position to minimize lateral drift in high-rise buildings. WIT Trans Built Environ 106:155–166
Baldock R, Shea K (2006) Structural topology optimization of braced steel frameworks using genetic programming, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) 4200 LNAI, 54–61
Baldock R, Shea K, Eley D (2005) Evolving optimized braced steel frameworks for tall buildings using modified pattern search, Proceedings of the 2005 ASCE International Conference on Computing in Civil Engineering 631–642
Balling RJ, Balling LJ, Richards PW (2009) Design of buckling-restrained braced frames using nonlinear time history analysis and optimization. J Str Eng 135(5):461–468
Besseris GJ (2008) Analysis of an unreplicated fractional-factorial design using nonparametric tests. Qual Eng 20:96–112
Besseris GJ (2009a) Order statistics for a two-level 8-run saturated-unreplicated fractional-factorial screening. Qual Eng 21:1–16
Besseris GJ (2009b) Design of experiments in software quality improvement. Int J Qual Eng Technol 1(2):158–187
Box GEP, Hunter WG, Hunter JS (2005) Statistics for experimenters: design, innovation, discovery, 2nd edn. John Wiley and Sons, Hoboken
Cho BR (2002) Optimum process target for two quality characteristics using regression analysis. Qual Eng 15(1):37–47
Cho BR, Park C (2005) Robust design modeling and optimization with unbalanced data. Comput Ind Eng 48(2):173–180
Cho BR, Kim YJ, Kimbler DL, Phillips MD (2000) An integrated joint optimization procedure for robust and tolerance design. Int J Prod Res 38:2309–2325
Day RW (1999) Geotechnical and foundation engineering. McGraw-Hill Professional, New York City
Deutsches Institut Fur Normung E.V. (German National Standard) (2007) DIN 4085—Subsoil—Calculation of earth-pressure
European Committee for Standardization (1997) Eurocode 2: Design of concrete structures, European Committee for Standardization
European Committee for Standardization (1997) Eurocode 3: Design of Steel structures, European Committee for Standardization
European Committee for Standardization (1999) Eurocode 7: Geotechnical Design, European Committee for Standardization
Fiori de Castro H, Cavalca KL (2003) Availability optimization with genetic algorithm. Int J Qual Reliab Manag 20(7):847–863
Kaveh A, Shahrouzi M (2008) Graph theoretical implementation of memetic algorithms in structural optimization of frame bracing layouts. Eng Comput 25(1):55–85
Lahdenperä P, Tanhuanpää VP (2000) Creation of a new design management system based on process optimization and proactive strategy. Eng Constr Archit Manag 7(3):267–277
Liu DP, Zhou JZ, Yang JJ (2005) Hybrid particle swarm optimization algorithm in optimization design of soil-nail bracing. J Highw Transp 18(4):32–36
Ministry of Environment, Urban Planning and Public Work General Secretariat of Public Work, Central Laboratory of Public Works (2008) New Regulation of concrete steel reinforcement technology. Greece, Athens
Montgomery DC (2004) Design and analysis of experiments, 6th edn. Wiley, New York
Organization for Antiseismic Planning And Protection & Greek Association of Civil Engineers (2000a) Greek regulation of reinforced concrete. Greece, Athens
Organization for Antiseismic Planning And Protection & Greek Association of Civil Engineers (2000b) Greek antiseismic regulation. Greece, Athens
Ozbulut OE, Roshcne P (2008) Optimization of multiple shape memory alloy devices by a genetic algorithm for seismic response of a tall structure, 18th Analysis and Computation Specialty Conference Proceedings, 1–10
Sarma KC, Adeli H (2005) Comparative study of optimum designs of steel high rise building structures using allowable stress design and load and resistance factor design codes. Pract Period Struct Des Constr 10(1):12–17
Telis ES, Besseris GJ, Stergiou C (2008a) Quality improvement of safety factor in construction design, proceedings of the first European research conference on continuous improvement and lean six sigma, march 2008. Glasgow, Scotland, pp 246–267
Telis ES, Besseris GJ, Stergiou C (2008b) Desirability analysis in construction design quality improvement, Proceedings of the European Network for Business and Industrial Statistics 8, September 2008. Greece, Book of abstracts, Athens 48
Toropov VV, Mahfouz SY (2001) Design optimization of structural steelwork using a genetic algorithm, FEM and a system of design rules. Eng Comput 18(3–4):437–459
Acknowledgments
We thank Geostirixis—S. Asproudas Co. for providing us with the appropriate equipment and case study.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Telis, ES., Besseris, G., Stergiou, C. et al. Simultaneous Design Characteristics Optimization in an Earth Retaining Structure. Geotech Geol Eng 31, 1275–1289 (2013). https://doi.org/10.1007/s10706-013-9649-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10706-013-9649-z