Abstract
The analysis of lightly reinforced concrete beams taking into account the nonlinear behavior of concrete in tension is typically addressed by numerical approaches based on the Cohesive Crack Model. In the present paper, Dimensional Analysis is applied to this context, in order to obtain a synthetic description of the phenomenon by reducing the number of the governing parameters. It will be analytically demonstrated that the structural response is more complex than that obtained by the Bridged Crack Model and based on Linear Elastic Fracture Mechanics. In this case, in fact, two dimensionless parameters, N P and s, are responsible for the brittle-to-softening-to-ductile transitions in the mechanical response. The results of a parametric analysis and of an experimental campaign available in the literature are interpreted in this new light.
Similar content being viewed by others
References
Baluch M, Azad A, Ashmawi W (1992) Fracture mechanics application to reinforced concrete members in flexure. In: Carpinteri A (eds) Applications of fracture mechanics to reinforced concrete. Elsevier Applied Science, London, pp 413–436
Barenblatt GI, Botvina LR (1980) Incomplete self-similarity of fatigue in the linear range of fatigue crack growth. Fatigue Fract Eng Mater Struct 3: 193–202
Barenblatt GI (1996) Scaling, self-similarity, and intermediate asymptotics. Cambridge University Press, Cambridge
Bažant ZP (1989) Identification of strain-softening constitutive relation from uniaxial tests by series coupling model for localization. Cem Concr Res 19: 973–977
Bazant ZP, Beisel S (1994) Smeared-tip superposition method for cohesive fracture with rate effect and creep. Int J Fract 65: 277–290
Bosco C, Carpinteri A (1992a) Softening and snap-through behavior of reinforced elements. J Eng Mech 118: 1564–1577
Bosco C, Carpinteri A (1992b) Fracture mechanics evaluation of minimum reinforcement in concrete structures. In: Carpinteri A (eds) Applications of fracture mechanics to reinforced Concrete. Elsevier Applied Science, London pp 347–377
Bosco C, Carpinteri A (1995) Discontinuous constitutive response of brittle matrix fibrous composites. J Mech Phys Solids 43: 261–274
Bosco C, Carpinteri A, Debernardi PG (1990) Minimum reinforcement in high-strength concrete. J Struct Eng 116: 427–437
Brincker R, Henriksen MS, Christensen FA, Heshe G (1999) Size effects on the bending behaviour of reinforced concrete beams. In: Carpinteri A (eds) Minimum reinforcement in concrete members. Elsevier Science Ltd, Oxford, pp 127–180
Buckingham E (1915) Model experiments and the form of empirical equations. ASME Trans 37: 263–296
Carpinteri A (1980) Size effect in fracture toughness testing: a dimensional analysis approach. In: Sih GC, Mirabile M (eds) Analytical and experimental fracture mechanics. Sijthoff & Noordhoff, Alphen ann den Rijn, pp 785–797
Carpinteri A (1981a) A fracture mechanics model for reinforced concrete collapse. In: Thurlimann B (ed) Advanced mechanics of reinforced concrete (Proc. IABSE Colloquium). Delft University Press, Delft, The Netherlands, pp 17–30
Carpinteri A (1981b) Static and energetic fracture parameters for rocks and concretes. Mater Struct 14: 151–162
Carpinteri A (1982) Notch sensitivity in fracture testing of aggregative materials. Eng Fract Mech 16: 467–481
Carpinteri A (1984) Stability of fracturing process in RC beams. J Struct Eng 110: 544–558
Carpinteri A (1985) Interpretation of the Griffith instability as a bifurcation of the global equilibrium. In: Shah SP (eds) Application of fracture mechanics to cementitious composites. Martinus Nijhoff Publishers, Dordrecht, The Netherlands, pp 287–316
Carpinteri A (1989a) Post-peak and post-bifurcation analysis of cohesive crack propagation. Eng Fract Mech 32: 265–278
Carpinteri A (1989b) Cusp catastrophe interpretation of fracture instability. J Mech Phys Solids 37: 567–582
Carpinteri A (1990) A catastrophe theory approach to fracture mechanics. Int J Fract 44: 57–69
Carpinteri A, Massabò R (1996) Bridged versus cohesive crack in the flexural behaviour of brittle-matrix composites. Int J Fract 81: 125–145
Carpinteri A, Colombo G, Ferrara G, Giuseppetti G (1989) Numerical simulation of concrete fracture through a bilinear softening stress-crack opening displacement law. In: Shah SP, Swartz SE (eds) Fracture of concrete and rock. Springer, New York, pp 131–141
Carpinteri A, Ferro G, Ventura G (2003) Size effects on flexural response of reinforced concrete elements with nonlinear matrix. Eng Fract Mech 70: 995–1013
Carpinteri A, Ruiz Carmona J, Ventura G (2007a) Propagation of flexural and shear cracks through reinforced concrete beams by the bridged crack model. Mag Concr Res 59: 743– 756
Carpinteri A, Corrado M, Paggi M, Mancini G (2007b) Cohesive versus overlapping crack model for a size effect analysis of RC elements in bending. In: Carpinteri A, Gambarova P, Ferro G, Plizzari G (eds) Fracture mechanics of concrete and concrete structures. Taylor & Francis, Leiden, The Netherlands, pp 655–663
Carpinteri A, Corrado M, Paggi M, Mancini G (2009) New model for the analysis of size-scale effects on the ductility of reinforced concrete elements in bending. J Eng Mech 135: 221–229
Ciavarella M, Paggi M, Carpinteri A (2008) One, no one, and one hundred thousand crack propagation laws: a generalized Barenblatt and Botvina dimensional analysis approach to fatigue crack growth. J Mech Phys Solids 56: 3416–3432
Comité Euro-International du Béton (1993) CEB-FIP Model Code 1990. Thomas Telford Ltd, Lausanne, Bulletin No. 213/214
Gustafsson PJ (1985) Fracture mechanics studies of non-yielding materials like concrete. Report TVBM-1007, Div Bldg Mater Lund Inst Tech, Sweden
Gustafsson PJ, Hillerborg A (1988) Sensitivity in shear strength of longitudinally reinforced concrete beams to fracture energy of concrete. J ACI 85: 286–294
Hawkins NM, Hjorsetet K (1992) Minimum reinforcement requirements for concrete flexural members. In: Carpinteri A (ed) Applications of fracture mechanics to reinforced concrete. Elsevier Applied Science, London, pp 379–412
Hillerborg A (1990) Fracture mechanics concepts applied to moment capacity and rotational capacity of reinforced concrete beams. Eng Fract Mech 35: 233–240
Hillerborg A, Modeer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Concr Res 6: 773–782
Irwin GR (1957) Analysis of stresses and strains near the end of a crack traversing a plate. J Appl Mech 24: 361–364
Jansen DC, Shah SP (1997) Effect of length on compressive strain softening of concrete. J Eng Mech 123: 25–35
Jenq YS, Shah SP (1989) Shear resistance of reinforced concrete beams—a fracture mechanics approach. In: Li VC, Bazant ZP (eds) Fracture Mechanics: Application to Concrete (Special Report ACI SP-118). American Concrete Institute, Detroit, pp 327–358
Kotsovos MD (1983) Effect of testing technique on the post-ultimate behaviour of concrete in compressione. Mater Struct 16: 3–12
Markeset G, Hillerborg A (1995) Softening of concrete in compression—localization and size effects. Cem Concr Res 25: 702–708
Palmquist SM, Jansen DC (2001) Postpeak strain-stress relationship for concrete in compression. ACI Mater J 98: 213–219
Phatak DR, Deshpande NP (2005) Prediction of 28 days compressive strength of 53-grade cements using dimensional analysis. J Mater Civil Eng 17: 733–735
Phatak DR, Dhonde HB (2003) Dimensional analysis of reinforced concrete beams subjected to pure torsion. J Struct Eng 129: 1559–1563
Planas J, Elices M (1992) Asymptotic analysis of a cohesive crack: 1. Theoretical background. Int J Fract 55: 153–177
Ruiz G, Elices M, Planas J (1999) Size effects and bond-slip dependence of lightly reinforced concrete beams. In: Carpinteri A (eds) Minimum reinforcement in concrete members. Elsevier Science Ltd, Oxford, pp 127–180
Ruiz G (2001) Propagation of a cohesive crack crossing a reinforcement layer. Int J Fract 111: 265–282
So KO, Karihaloo BL (1993) Shear capacity of longitudinally reinforced beams—a fracture mechanics approach. J ACI 90: 591–600
Suzuki M, Akiyama M, Matsuzaki H, Dang TH (2006) Concentric loading test of RC columns with normal- and high-strength materials and averaged stress-strain model for confined concrete considering compressive fracture energy. In: Proc. 2nd fib Congress, Naples, Italy
van Mier JGM (1984) Strain-softening of Concrete under Multiaxial Loading Conditions. PhD Thesis, Eindhoven University of Technology, The Netherlands
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Corrado, M., Cadamuro, E. & Carpinteri, A. Dimensional analysis approach to study snap back-to-softening-to-ductile transitions in lightly reinforced quasi-brittle materials. Int J Fract 172, 53–63 (2011). https://doi.org/10.1007/s10704-011-9646-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-011-9646-2