Abstract
A circular hole with two symmetric rectilinear radial cracks initiated at its boundary is analyzed from the point of view of its elastic compliance (contribution to the overall elastic properties of a representative volume). Results are obtained using Rice’s connection between stress intensity factor and effect of a crack on the elastic properties of a material. We compare our result with that for a combine contribution of noninteracting circular pore and a rectilinear crack to show when this combination can be used for approximation of the elastic compliance contribution.
Similar content being viewed by others
References
Abdelmoula R., Semani K., Li J. (2007) Analysis of cracks originating at the boundary of a circular hole in an infinite plate by using a new conformal mapping approach. Appl. Math. Computation 188: 1891–1896
Bowie O.L. (1956) Analysis of an infinite plate containing radial cracks originating at the boundary of an internal circular hole. J. Math. Phys 35: 60–71
Jasiuk I., Chen J., Thorpe M.F. (1994) Elastic moduli of two-dimensional materials with polygonal and elliptical holes. Appl. Mech. Rev. 47: S18–S28
Kachanov M. (1992) Effective elastic properties of cracked solids: critical review of some basic concepts. Appl. Mech. Rev 45: 305–336
Kachanov M., Sevostianov I. (2005) On quantitative characterization of microstructures and effective properties. Int. J. Solids Struct. 42: 309–336
Kachanov M, Tsukrov I., Shafiro B. (1994) Effective moduli of solids with cavities of various shapes. Appl. Mech. Rev. 47: S151–S174
Mear M., Sevostianov I., Kachanov M. (2007) Elastic compliances of non-flat cracks. Int. J. Solids Struct. 44: 6412–6427
Newman, J.C. (1971) An improved method of collocation for the stress analysys of cracked plates with various shaped boundaries. NASA Technical Note D-6376.
Rice, J. R. (1975) Continuum Mechanics and Thermodynamics of Plasticity in Relation to Microscale Deformation Mechanisms. In: A.Argon (ed), Constitutive Equations in Plasticity, MIT Press, 23-75.
Sevostianov I., Kachanov M. (1999) Compliance tensors of ellipsoidal inclusions. Int. J. Fracture 96: L3–L7
Sevostianov I., Kachanov M. (2002a) Explicit cross-property correlations for anisotropic two-phase composite materials. J. Mech. Phys. Solids 50: 253–282
Sevostianov, I. and Kachanov, M. (2002b) On elastic compliances of irregularly shaped cracks. Int. J. Fracture, 114, 2002, 245-257.
Sevostianov I. (2003) Explicit relations between elastic and conductive properties of a material containing annular cracks. Phil. Trans. Roy. Soc. L. A 361: 987–999
Sevostianov I., Kachanov M., Zohdi T. (2008) On computation of the compliance and stiffness contribution tensors of non-ellipsoidal inhomogeneities. Int. J. Solids Struct. 45: 4375–4383
Tsukrov I., Novak J. (2002) Effective elastic properties of solids with defects of irregular shape. Int. J. Solids Struct. 39: 1539–1555
Zimmerman R. (1986) Compressibility of two-dimensional cavities of various shapes. J. Appl. Mech. 53: 500–504
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Picazo, M., Sevostianov, I. On the Elastic Compliance of a Circular Hole with Two Symmetric Radial Cracks Initiated at its Boundary. Int J Fract 167, 273–280 (2011). https://doi.org/10.1007/s10704-010-9549-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-010-9549-7