Abstract
A particular weight function method is used in this study to determine the stress intensity factors (SIFs) and T-stresses for offset double edge-cracked plates (ODECPs). By using reference loading conditions prescribed on the crack flanks for finite element analyses, the coefficients of weight functions are derived and compiled in the form of tables. With the weight functions, the SIFs and T-stresses for several loading cases are calculated. The results compare well with those obtained using the displacement method. Applying the derived weight functions, the SIFs and T-stresses for ODECPs under several loading conditions are determined. The results can be used as references for related applications.
Similar content being viewed by others
References
Ayatollahi MR, Pavier MJ, Smith DJ (1998) Determination of T-stress from finite element analysis for mode I and mixed I/II loading. Int J Fract 91: 283–298. doi:10.1023/A:1007581125618
Bueckner HF (1970) A novel principle for the computation of stress intensity factors. Z Angew Math Mech 50: 529–546
Chao YJ, Liu S, Broviak BJ (2001) Brittle fracture: variation of fracture toughness with constraint and crack curving under mode I conditions. Exp Mech 41(3): 232–241. doi:10.1007/BF02323139
Fett T (1997) A Green’s function for T-stress in an edge cracked rectangular plate. Eng Fract Mech 57: 365–373. doi:10.1016/S0013-7944(97)00034-9
Fett T (1998) T-stresses in rectangular plates and circular disks. Eng Fract Mech 60: 631–652. doi:10.1016/S0013-7944(98)00038-1
Fett T, Munz D (1997) Stress intensity factors and weight functions. Computational Mechanics Publications, Southampton
Fett T, Rizzi G (2005) Weight functions for stress intensity factors and T-stress for oblique cracks in a half-space. Int J Fract 132: L9–L16. doi:10.1007/s10704-005-0024-9
Fett T, Munz D, Tilscher M (1997) Weight functions for sub-interface cracks. Int J Solids Struct 34: 393–400. doi:10.1016/S0020-7683(96)00010-8
Fett T, Rizzi G, Bahr HA (2006) Green’s functions for the T-stress of small kink and fork cracks. Eng Fract Mech 73: 1426–1435. doi:10.1016/j.engfracmech.2005.12.007
Karihaloo BL, Xiao QZ (2001) Accurate determination of the coefficients of the elastic crack tip asymptotic field by a hybrid crack element with p-adaptivity. Eng Fract Mech 68: 1609–1630. doi:10.1016/S0013-7944(01)00063-7
Leevers PS, Radon JC (1982) Inherent stress biaxiality in various fracture specimens. Int J Fract 19: 311–325. doi:10.1007/BF00012486
Lim IL, Johnston IW, Choi SK (1992) Comparison between various displacement-based stress intensity factor computation techniques. Int J Fract 58: 192–210. doi:10.1007/BF00015615
Liu S, Chao YJ (2003) Variation of fracture toughness with constraint. Int J Fract 124: 113–117. doi:10.1023/B:FRAC.0000018230.97560.ae
Richardson DE, Goree JG (1993) Experimental verification of a new two parameter fracture model. In: Chona R (ed) Fracture mechanics: twenty-third symposium. ASTM STP 1189, ASTM, Philadelphia, p 738
Sham TL (1991) The determination of the elastic T-term using higher order weight functions. Int J Fract 48: 81–102. doi:10.1007/BF00018392
Wang X (2002) Elastic T-stress for cracks in test specimens subjected to non-uniform stress distributions. Eng Fract Mech 69: 1339–1352. doi:10.1016/S0013-7944(01)00149-7
Williams ML (1957) On the stress distribution at the base of a stationary crack. J Appl Mech – T ASME 24: 109–114
Wilson WK (1969) On combined mode fracture mechanics. Research report 69-1E7-FMECH-R1. Westinghouse Research Laboratories, Pittsburgh
Xiao QZ, Karihaloo BL (2002) Approximate Green’s functions for singular and higher order terms of an edge crack in a finite plate. Eng Fract Mech 69: 959–981. doi:10.1016/S0013-7944(01)00114-X
Xiao QZ, Karihaloo BL, Liu XY (2004) Direct determination of SIF and higher order terms of mixed mode cracks by a hybrid crack element. Int J Fract 125: 207–225. doi:10.1023/B:FRAC.0000022229.54422.13
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, CH., Wang, CL. Stress intensity factors and T-stresses for offset double edge-cracked plates under mixed-mode loadings. Int J Fract 152, 149–162 (2008). https://doi.org/10.1007/s10704-008-9276-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-008-9276-5