Structural design concepts for controlled electrical complexes with complex zones of fibrous material deformation are considered together with methods of their investigation. Based on an analysis of methods for controlling the deformation properties of fibrous materials, it is shown that the correct position (centering) of the web can be provided by a constant (given) tension created at the entrance to the thermomechanical processing zone and synchronization of the velocity modes of units and mechanisms in complex multidimensional dynamic objects.
Similar content being viewed by others
References
Yu.V. Vasil’kov and A.V. Romanov, Thermal Treatment of Textile Products for Technical Purposes [In Russian], Legprombytizdat, Moscow (1990).
K.E. Perepelkin, Structural Conditionality of Mechanical Properties of Highly Oriented Fibers [In Russian], NIITEkhim, Moscow (1999).
S.I. Rybnikov, Automatic Winding Control [In Russian], Energiya, Moscow (2010).
A.A. Askadskii, Deformation of Polymers [In Russian], Nauka, Moscow (2001).
E.T. Severs, Rheology of Polymers [In Russian], Nauka, Moscow, (1986).
A.E. Polyakov, M.S. Ivanov et al., Pat. for Utility Model No. 187519. A Device for Controlling Thermal Flows in the Process of the Textile Material Deformation [In Russian], Publ.: 03/11/2019, Bul. No. 8.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskie Volokna, No. 5, pp. 66-71, 2021
Rights and permissions
About this article
Cite this article
Polyakov, A., Ivanov, M., Ryzhkova, E. et al. Structural Design Concepts and Research Methods for Multidimensional Dynamic Objects with Complex Zones of Fibrous Material Deformation. Fibre Chem 53, 355–360 (2022). https://doi.org/10.1007/s10692-022-10299-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-022-10299-1