Composites of polyamide 6 and modified montmorillonite were obtained by mixing the melt in a twin-screw extruder from Jiangsu Xinda Science and Technology. The structure of the resultant composites was studied by x-ray structural analysis and scanning electron microscopy. In comparison with unfilled polyamide, the elasticity modulus, toughness, and flow index of the composites were all found to be enhanced.
Similar content being viewed by others
References
W. Xie, Z. Gao, et al., Singh Thermochim. Acta, 339-350 (2001).
D. M. Delozier, R. A. Orwol, et al., Polymer, 43, 813-822 (2002).
V. A. Gerasin, F. A. Bakhov, et al., Vysokomolek. Soedin., 47, No. 9, 1635-1651 (2005).
S. Yu. Khashirova, Yu. I. Musaev, et al., Vysokomolek. Soedin., 51, No. 9, 1723-1728 (2009).
M. B. Begieva, R. M. Mamchegov, et al., Internat. Polymer. Sci. and Technol., 42, 29-34 (2015).
M. B. Begieva, V. N. Shelgaev, et al., Izv. VUZov. Khim. Khim. Tekhnol., 58, No. 9, 25-28 (2015).
Y. Kojima, A. Usuki, et al., J. Polymer Sci., Polymer Chem., 31, 983 (1993).
V. Kuppa and E. Manias, Chem. Mater., 14, 2171 (2002).
K. J. Yao, M. Song, et al., Polymer, 43, 1017 (2002).
C. H. Davis, L. J. Mathias, et al., J. Polymer Sci., Polymer Phys., 40, 2661 (2002).
D. C. Lee and L. W. Jang, J. Appl. Polymer Sci., 61, 1117 (1996).
M. B. Begieva, A. M. Kharaev, and Yu. A. Malkanduev, Russian Federation Patent No. 2,529,028 (2014).
Clarey M. Edwards, Jr., S. J. Tzipursre, et al., USA Patent No. 6,050,509 (2001).
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskie Volokna, Vol. 50, No. 1, pp. 47-50, January-February, 2018.
Rights and permissions
About this article
Cite this article
Begieva, M.B., Bazheva, R.C., Khasanov, V.V. et al. Effect of Na +-Montmorillonite Modified with N,N-Diallylaminoisohexanoic Acid on the Structure and Properties of Polyamide 6. Fibre Chem 50, 45–48 (2018). https://doi.org/10.1007/s10692-018-9927-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-018-9927-x