We have developed a procedure for determining the position of the fell of a fabric, taking into account the accuracy in manufacture of the pivot linkages during production of fabrics made from glass and basalt threads. We have performed calculations for the mechanism for beating up the weft on a narrowfabric loom. The calculated position of the fell of the fabric is fixed using an assembly of stretcher temples and a crossbar, clamped to the loom frame.
Similar content being viewed by others
References
A. N. Korolev and V. I. Terent’ev, Dizain i Tekhnologiya, No. 35, 75 (2014).
L. I. Koroteeva and E. Yu. Koroteeva, Technology and Equipment for Obtaining Specialty Fibers and Threads [in Russian], INFRA-M, Moscow (2015), p. 288.
G. V. Kreinin, A. P. Bessonov, and V. V. Voskresenskii, Kinematics, Dynamics, and Accuracy of Mechanisms. Handbook [in Russian], Mashinostroenie, Moscow (1984), p. 215.
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskie Volokna, Vol. 48, No. 4, pp. 79-80, July-August, 2016.
Rights and permissions
About this article
Cite this article
Korolev, P.A., Sergeeva, A.V. & Terent’ev, V.I. Aspects of Forming the Fell of a Fabric (Narrow Fabric) Made From Mineral Threads. Fibre Chem 48, 336–338 (2016). https://doi.org/10.1007/s10692-017-9792-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-017-9792-z