Fuzzy modeling is performed for a control system in which three input parameters are measured - the concentrations of hydrogen sulfide before and after the scrubber and the acidity of the solution. Three actuators control the feed of reagents and air to prepare the purifying solution that is supplied to the scrubber, which is used for the chemisorption of hydrogen sulfide formed during the production of viscose fibers. The block diagram of the fuzzy controller is also shown.
Similar content being viewed by others
References
A. N. Ryauzov, Technology for the Production of Chemical Fibers: Text for Technical High Schools [in Russian], Khimiya, Moscow (1980).
A. V. Leonenkov, Fuzzy Modeling in MATLAB and fuzzyTECH [in Russian], BKhV-Peterburg, St. Petersburg (2005).
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskie Volokna, No. 5, pp. 64-68, September-October, 2013.
Rights and permissions
About this article
Cite this article
Sigacheva, V.V., Nesmeyanova, O.K. Fuzzy Modeling of Control of the Chemisorption of Ventilation air from the Production of Viscose Fibers. Fibre Chem 45, 324–328 (2014). https://doi.org/10.1007/s10692-014-9537-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-014-9537-1