The possibility of manufacturing knitted fabrics with different properties for reinforcing polymer composites was demonstrated. In making composite materials based on knits, structurally balanced weaves of the 1 + 1 rib and Milan rib type are preferred, since traditional methods of wet heat treatment are unacceptable for knits made of aramid fibres, and for this reason preventing twisting of the fabric is extremely important. The studies showed that the mechanical properties of knit polymer composites are a function of the structure of the knit fabrics to a significant degree and can vary significantly within a wide range.
Similar content being viewed by others
References
T. W. Chou and F. K. Ko, Textile Structural Composites, Vol. 3, Elsevier, Amsterdam (1989), p. 388.
Z. M. Huang and S. Ramakrishna, Composites. Part A, No. 31, 479 (2000).
K. H. Leong, S. Ramakrishna, et al., Composites. Part A, No. 31, 197 (2000).
Tong Liyong, A. P. Mouritz, and M. K. Bannister, 3-D Fibre Reinforced Polymer Composites, Elsevier, Amsterdam (2002), p. 255.
S. Ramakrishna and D. Hull, Comp. Sci. Tech., No. 50, 237 (1994).
S. Chou and C.-J. Wu, J. Reinforc. Plast. Comp., No. 11, 1239 (1992).
G. Huysmans, I. Verpoest, and P. Van Houtte, Composites. Part A, No. 32, 1465 (2001).
O. A. Khondker, I. Herszberg, and K. H. Leong, J. Comp. Mat., No. 35, 489 (2001).
S. Ramakrishna, Comp. Sci. Tech., No. 57, 1 (1997).
S. Ramakrishna, N. K. Cuong, and H. Hamada, J. Reinforc. Plast. Comp., No. 16, 946 (1997).
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskie Volokna, No. 1, pp. 45-47, January-February, 2009.
Rights and permissions
About this article
Cite this article
Stolyarov, O.N. Mechanical properties of polymer composites reinforced with knit fabrics made of high-strength aramid fibres. Fibre Chem 41, 53–55 (2009). https://doi.org/10.1007/s10692-009-9110-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-009-9110-5