The thermal characteristics of para-aramid, polyoxadiazole, and polyimide fibres were comparatively investigated by dynamic thermogravimetric analysis, differential scanning calorimetry, and thermomechanical analysis. It was shown that thermooxidative degradation of these types of fibres began at 400–450 °C and intensified at higher temperatures. The fibres investigated are characterized by size stability up to the initial temperature of thermooxidative processes (400–450 °C). With respect to thermal stability, these fibres are in the following order: polyimide > polyoxadiazole, and carbocyclic para-aramid fibres. The correlation of the “hydrogen index” IH and “aromaticity index” IAr for thermostable fibres with their thermal stability was demonstrated.
Similar content being viewed by others
References
L. V. Avrorova, A. V. Volokhina, et al., Khim. Volokna, No. 4, 21–26 (1989).
G. I. Kudryavtsev, V. Ya. Varshavskii, et al., Reinforcing Chemical Fibres for Composite Materials [in Russian], Khimiya, Moscow (1992).
K. E. Perepelkin, Ros. Khim. Zh. (Zh. Vses. Khim. O-va im. D. I. Mendeleeva), 46, No. 1, 31–48 (2002).
K. E. Perepelkin, in: High-Performance Fibres, J. W. S. Hearle (ed.), Woodhead, Cambridge (2001), pp. 115–132; 146–154.
K. E. Perepelkin, Chem. Fibers Intern., 54, No. 2, 101–107 (2004).
S. V. Kudryavtseva and E. V. Samardukov, Khim. Volokna, No. 1, 38–40 (1995).
V. B. Glazunov, V. N. Sugak, et al., “High-strength Armos fibres and new copolymeric composites for high-strength fibres,” in: Proceedings of the V International Symposium on Chemical Fibres, Preprints [in Russian], Vol. 4, VNIISV, Kalinin (1990, pp. 30–35.
N. N. Panikarova, G. Ya. Rudinskaya, et al., Chemical Fibre Industry [in Russian], NIITEKhim, Moscow (1975), pp. 19–23.
M. I. Bessonov, M. M. Koton, et al., Polyimides — A Class of Thermostable Polymers [in Russian], Nauka, Leningrad (1983).
L. P. Kobets, in: Thermal Stability of Construction Plastics [in Russian], E. B. Trostyanskaya (ed.), Khimiya, Moscow (1980), pp. 107–135.
K. E. Perepelkin, S. A. Baranova, and E. Yu. Gurova, Khim. Volokna, No. 1, 34–38 (1995).
E. Yu. Gurova, Effect of Thermal Aging on the Mechanical Properties of Fibres Made from Aromatic Polymers, Candidate Dissertation, SGUTD, Leningrad (2005).
I. V. Andreeva, Change in the Properties of High-Strength, High-Modulus Para-aramid Fibres in Thermal Aging, Candidate Dissertation, SGUTD, Leningrad (2005).
T. K. Musina and Z. G. Oprits, in: Proceedings of the International Conference “Fibre Materials — the XXI Century [in Russian], CD-disk, St. Petersburg (May 2005).
A. T. Kalashnik, Doctoral Dissertation, L. Ya. Karpov Research Institute of Physical Chemistry, Moscow (1990).
K. E. Perepelkin, I. V. Andreeva, et al., Khim. Volokna, No. 4, 22–26 (2003).
K. E. Perepelkin, O. B. Malan'ina, et al., Khim. Volokna, No. 5, 45–48 (2004).
S. A. Pavlova, I. V. Zhuravleva, and Yu. I. Tolchinskii, Thermal Analysis of Organic and Macromolecular Compounds [in Russian], Khimiya, Moscow (1983).
Jan F. Rabek, Experimental Methods in Polymer Chemistry, Wiley, New York, Toronto (1980).
K. E. Perepelkin, J. van den Heuvel, et al., “Thermal properties analysis of aromatic yarns based on polyaramide, polyoxazole, and polyimide polymers by DSC, TGA, TMA, and mechanical test methods,” in: The Specialty High Performance Polymer Fibres Conference — 2006, CD-disk University of Manchester, UK (July, 2006), pp. 1–4.
L. S. Efros and L. E. Utevskii, Vysokomolek. Soedin., Ser. B, No. 4, 309–313 (1975).
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskie Volokna, No. 3, pp. 72–74, May–June, 2008.
Rights and permissions
About this article
Cite this article
Perepelkin, K.E., Dresvyanina, E.N. & Pakshver, E.A. Thermal characteristics of high-strength and thermostable aromatic fibres. Fibre Chem 40, 266–269 (2008). https://doi.org/10.1007/s10692-008-9050-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-008-9050-5