The use of hydrolytic polymerization of caprolactam in synthesis of filled PA 6 in the presence of industrial PAN tow increases the physicomechanical properties of the composite material obtained and confirms the expediency of using polymerization filling in fibre-filled thermoplast technology.
Similar content being viewed by others
References
N. M. Galashina, Vysokomolek. Soedin., 36, No. 4, 640–650 (1994).
N. S. Enikolopov and S. A. Vol'fson, Plast. Massy, No. 1, 39–40 (1978).
A. A. Fridman, L. V. Popov, et al., Plast. Massy, No. 2, 17–20 (1982).
V. V. Smirnov, L. A. Tkachenko, et al., Dokl. Akad. Nauk SSSR, 278, No. 4, 927 (1984).
F. S. D'yachkovskii and L. A. Novoshonova, Usp. Khim., 53, No. 2, 200 (1984).
T. M. Frunze et al., Activated Anionic Polymerization of Lactams — a Progressive Method of Fabricating Polyamides [in Russian], NIITEKhim, Moscow (1975).
A. Ya. Malkin et al., Vysokomolek. Soedin., A22, No. 5, 995 (1980).
V. G. Frolov, S. G. Kulichikhin, et al., Plast. Massy, No. 6, 8–10 (1985).
V. G. Makarov and V. B. Koptenarmusov, Industrial Thermoplasts [in Russian], ANO Izd. “Khimiya” Izd. “KolosS”, Moscow (2003).
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskie Volokna, No. 3, pp. 80–82, May–June, 2008.
Rights and permissions
About this article
Cite this article
Ustinova, T.P., Morozova, M.Y., Levkina, N.L. et al. Study of polymerization filling of polyamide 6 based on fibrous-disperse systems. Fibre Chem 40, 278–280 (2008). https://doi.org/10.1007/s10692-008-9048-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-008-9048-z