Abstract
In spinning basalt fibres, the drafting force is in the same range as in spinning of glass fibres. The effect of the drafting force can not be considered in the calculation for the strength and rigidity of the bottom of the spinneret.
Similar content being viewed by others
References
M. S. Grachev, Izv. Vyssh. Uchebn. Zaved., Tekhnol. Tekst. Prom., No. 6, 104–106 (2006).
S. F. Pyatkin, Development of a Method and Study of Tension and Friction in Glass Fibre during Drafting, Candidate Dissertation, All-Union Scientific-Research Institute of Synthetic Polymer Fibres, Moscow (1953).
M. V. Tomashevskii, in: Glass Fibres and Fibreglass filled Plastics [in Russian], V. E. Sheiko (ed.), VNIISPV, Moscow (1970), pp. 41–46.
M. D. Khodakovskii (ed.), Production of Glass Fibres and Fabrics [in Russian], Khimiya, Moscow (1973), p. 311.
G. N. Kan, M. D. Khodakovskii, et al., Technology, Physical and Technical Properties, and Use of Glass Fibre Materials [in Russian], VNIISPV, Moscow (1976).
L. N. Smirnov and V. Yu. Koshelev, in: Basalt Fibre Materials [in Russian], V. I. Kostikov and L. N. Smimov (eds.), Informkonversiya, Moscow (2001).
Author information
Authors and Affiliations
Additional information
__________
Translated from Khimicheskie Volokna, No. 5, pp. 47–50, September–October, 2007.
Rights and permissions
About this article
Cite this article
Grachev, M.S., Koroteeva, L.I. Effect of the drafting force on the strength of the bottom of the spinneret. Fibre Chem 39, 416–419 (2007). https://doi.org/10.1007/s10692-007-0091-y
Issue Date:
DOI: https://doi.org/10.1007/s10692-007-0091-y