Abstract
The basic elements of a comprehensive analysis of fibre-forming polymers as objects for drying are examined. The basic characteristics and indexes of their effect on the drying process are identified.
Similar content being viewed by others
References
B. S. Sazhin and V. B. Sazhin, Scientific Principles of Drying Technology [in Russian], Nauka, Moscow (1997).
V. B. Sazhin and M. B Sazhin, Selection and Design of Equipment with a Suspended Bed [in Russian], RosZITLR Moscow (2001).
V. B. Sazhin and M. B. Sazhina, Drying in Swirling Flows: Theory, Calculation, Engineering Solutions [in Russian], RosZITLP, Moscow (2001).
P. G. Romankov and N. B. Rashkovskaya, Drying in a Suspended State [in Russian], Khimiya, Leningrad (1979).
B. S. Sazhin, Suspended Bed Hydrodynamics [in Russian], MTI, Moscow (1978).
N. I. Gel’perin, V. G. Ainshtein, and V. B. Kvasha, Principles of Fluidization Technology [in Russian], Khimiya, Moscow (1967).
A. F. Chudnovskii, Thermophysical Characteristics of Disperse Materials [in Russian], Fizmatgiz, Moscow (1962).
B. S. Sazhin and N. E. Shadrina, Selection and Design of Drying Units Based on a Comprehensive Analysis of Wet Materials as Objects of Drying [in Russian], MTI, Moscow (1979).
A. V. Lykov, Drying Theory [in Russian], Energiya, Moscow (1968).
A. M. Planovski, V. I. Mushtaev, and V. M. Ul’yanov, Drying of Disperse Materials in the Chemical Industry [in Russian], Khimiya, Moscow (1979).
B. S. Sazhin, M. B. Sazhina, et al., Khim. Volokna, No. 3, 21–24 (2007).
Author information
Authors and Affiliations
Additional information
__________
Translated from Khimicheskie Volokna, No. 3, pp. 24–26, May–June, 2007.
Rights and permissions
About this article
Cite this article
Sazhin, B.S., Sazhina, M.B., Belousov, A.S. et al. Comprehensive analysis of disperse fibre-forming polymers as objects of drying in a suspended bed. Fibre Chem 39, 201–204 (2007). https://doi.org/10.1007/s10692-007-0040-9
Issue Date:
DOI: https://doi.org/10.1007/s10692-007-0040-9