Abstract
Algebraic expressions were obtained with an analytical model of spinning for the length of the spinning path, the coordinate corresponding to the maximum of the fibre longitudinal velocity gradient, the maximum absolute value of the longitudinal velocity gradient, and the change in the relative temperature of the fibre over the spinning path. The dependences of these quantities on the heat transfer parameter and draw ratio were determined.
Similar content being viewed by others
REFERENCES
A. Ziabicki, Fundamentals of Fibre Formation, Wiley, London (1976).
K. E. Perepelkin, Physicochemical Principles of Spinning of Chemical Fibres [in Russian], Khimiya, Moscow (1978).
Chang Dae Han, Rheology in Polymer Processing, Academic Press, New York-San Francisco-London (1976).
V. D. Fikhman, “Uniaxial stretching of polymers,” in: Theory of Spinning of Chemical Fibres [in Russian], Khimiya, Moscow (1975).
A. L. Kalabin, Khim. Volokna, No. 2, 52–54 (2005).
Author information
Authors and Affiliations
Additional information
__________
Translated from Khimicheskie Volokna, No. 5, pp. 44–47, September–October, 2005.
Rights and permissions
About this article
Cite this article
Kalabin, A.L. Analysis and Estimation of the Fundamental Kinematic and Thermal Parameters in Spinning Fibres from Polymer Melts. Fibre Chem 37, 367–370 (2005). https://doi.org/10.1007/s10692-006-0010-7
Issue Date:
DOI: https://doi.org/10.1007/s10692-006-0010-7