REFERENCES
B. Kalb and A. J. Pennings, Polym. Bull., 1, 871 (1979).
P. Smith and P. J. Lemstra, Makromol. Chem., 180, 2983 (1979).
P. M. Pakhamov, High-Strength Polymer Fibres [in Russian], TvGU, Tver' (1993).
V. P. Galitsyn, V. P. Napasnikov, and A. E. Mikushev, RF Patent No. 796.689, No. 1 (1993).
M. Matsuo and C. Sawatari, Macromolecules, 19, 2036 (1986).
A. V. Savitskii, G. N. Andreeva, et al., Vysokomolek. Soedin., 31A, No.9, 1865 (1989).
P. M. Pakhamov, N. V. Larionova, and V. G. Alekseev, Vysokomolek. Soedin., 37A, No.5, 892 (1995).
H. Rothenburg, S. D. Khizhnyak, V. P. Galitsyn, et al., Physical Chemistry of Polymers [in Russian], Vol. 6, TvGU, Tver' (2000), p. 30.
P. M. Pakhomov, A. E. Chmel', et al, Dokl. Akad. Nauk, 386, No.2, 220 (2002).
K. Kober, S. Khizhnyak, et al., J. Appl. Polym. Sci., 72, 1795 (1999).
P. Pakhomov, S. Khizhnyak, et al., Eur. Polym. J., 37, 623 (2001).
P. M. Pakhomov, S. D. Khizhnyak, et al., J. Macromol. Sci.-Phys., B41, 229 (2002).
P. Pakhomov, S. Khizhnyak, et al., J. Appl. Polym. Sci., 89, 373 (2003).
A. Keller, Faraday Discuss. Chem. Soc., 101, 1–50 (1996).
P. M. Pakhomov, G. Roiter, et al., Dokl. Akad. Nauk, 391, No.2, 215 (2003).
P. Pakhomov, S. Khizhnyak, et al., Macromolecules, 39, 4868 (2003).
P. Pakhomov, S. Khizhnyak, et al., Eur. Polym. J., 37, 1019 (2003).
P. Pakhomov, S. Khizhnyak, et al., Polymer, 44, 4651 (2003).
P. M. Pakhomov, S. D. Khizhnyak, et al., Vysokomolek. Soedin., 47A, No.4, 652 (2005).
V. Galitsyn, S. Khizhnyak, et al., J. Macromol. Sci.-Phys., B42, 1085 (2003).
G. Capaccio, M. A. Wilding, and I. M. Ward, J. Polym. Sci.:Polym. Phys. Ed., 19, 1489 (1981).
M. Al-Hassian, G. R. Devies, and I. M. Ward, Polymer, 42, 3679 (2001).
K. Tsobkalo, V. Vasilieva, et al., Polymer, 44, 1618 (2003).
Author information
Authors and Affiliations
Additional information
__________
Translated from Khimicheskie Volokna, No. 5, pp. 6–11, September–October, 2005.
Rights and permissions
About this article
Cite this article
Pakhomov, P.M., Galitsyn, V.P., Krylov, A.L. et al. Structural Transitions in Manufacture of High-Strength Polyethylene Fibres by the Gel-Technology Method. Fibre Chem 37, 319–326 (2005). https://doi.org/10.1007/s10692-006-0002-7
Issue Date:
DOI: https://doi.org/10.1007/s10692-006-0002-7