Skip to main content

Advertisement

Springer Nature Link
Log in

The possibility of fly ash and blast furnace slag disposal by using these environmental wastes as substitutes in portland cement

  • Published:
Environmental Monitoring and Assessment Aims and scope Submit manuscript

Abstract

The possibility of disposing of fly ash (FA) and blast furnace slag (BFS), which are environmental wastes, by using them as substitutes in portland cement was examined in this study. Portland cement (CEM I), FA, BFS, CEN standard sand, and water were used in the production of mortars. Blended cements were obtained by substituting FA, BFS, and a mixture of FA and BFS (FABFS) at 5.0%, 10.0%, 15.0%, and 20.0% ratios in portland cement. Physical (Blaine area, density, initial and final setting time, and fineness), mechanical (flexural strength and compressive strength), radiation permeability (determination of linear absorption coefficient) and high-temperature experiments were performed on the FA, BFS, and FABFS samples. Mortar prism samples with a size of 40 × 40 × 160 mm were obtained using these cements. The samples were exposed to five temperatures: 20, 150, 300, 700, and 900 °C. Mortar samples kept at 20 °C were used as references. A total of 390 samples were studied under air cooling (spontaneous cooling at 20 ± 2 °C in laboratory environment). After the mortar samples reached at room temperature, flexural strength and compressive strength tests were carried out on the 28th and 90th days. The test results showed that FA, BFS, and FABFS can be used as pozzolanic additives in cement mortars both alone and together and can be applied in buildings with a high risk of fire up to certain temperature values. The sample with the highest linear absorption coefficient was the FABFS sample, and as the sample with the lowest radiation permeability, it was determined to be appropriate for use in buildings that are exposed to radiation effects.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Explore related subjects

Discover the latest articles and news from researchers in related subjects, suggested using machine learning.

References

  • Açikgenc, M., Karatas, M., & Ulucan, Z. C. (2013). The effect of the waste brick and limestone dust of the Elazig region on the engineering properties of the self-contained mortar. PamFAkale University. Journal of Engineering Sciences, 19(6), 249–255.

    Google Scholar 

  • Akyildiz, A., Köse, E. T., & Yildiz, A. (2017). Compressive strength and heavy metal leaching of concrete containing medical waste incineration ash. Construction and Building Materials, 138, 326–332.

    CAS  Google Scholar 

  • American Society For Testing And Materials. (2002). C109/C109M-02 standard test method for compressive strength of hydraulic cement mortars. American: Society for Testing and Materials International.

    Google Scholar 

  • American Society for Testing and Materials. (2017). C618-17a Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. American: Society for Testing and Materials International.

    Google Scholar 

  • Baradan, B., Yazici, H., & Ün, H. (2010). Persistence in concrete and concrete structures (durability), Turkey Ready Mixed Concrete Association. Istanbul: Publications.

    Google Scholar 

  • Bayraktar, O. Y. (2016). Statistical comparison of mechanical behavior at the time of accident in the mortars produced with pozzolanic additives, Gazi University, Institute of Science and Technology, Ph.D. Thesis, Ankara.

  • Bayraktar, O. Y., Saglam-Citoglu, G., Caglar, H., Caglar, A., Arslan, M., & Cetin, M. (2018). The mechanical properties of the different cooling requirements of high-temperature plaster. Fresenius Environmental Bulletin, 27(8), 5399–5409.

    CAS  Google Scholar 

  • Bayraktar, O. Y., Saglam-Citoglu, G., & Abo Aisha, A. E. S. (2019a). The use of scrap tires in the construction sector. International Journal of Trend in Research and Development, 6(1), 253–256.

    Google Scholar 

  • Bayraktar, O. Y., Saglam-Citoglu, G., & Abo Aisha, A. E. S. (2019b). Performance research of lime based mortars. International Journal of Trend in Research and Development, 6(1), 257–259.

    Google Scholar 

  • Bayraktar, O. Y., Saglam-Citoglu, G., Belgin, C. M., & Cetin, M. (2019c). Investigation of the mechanical properties of marble dust and silica fume substituted portland cement samples under high temperature effect. Fresenius Environmental Bulletin, 28(5), 3865–3875.

    CAS  Google Scholar 

  • Bilgin, N. (2010). Use of marble powder wastes in the production of building materials. Yildiz Technical University, Institute of Science and Technology, Master Thesis, Istanbul.

  • Binici, H., Gemci, R., Küçükönder, A., & Solak, H. H. (2012a). Thermal conductivity, sound insulation and radiation transmission of cotton waste, fly ash and barite reinforced chipboards. Electronic Journal of Construction Technologies, 8(1), 16–25.

    Google Scholar 

  • Binici, H., Gemci, R., & Kücükönder, A. (2012b). Investigating the sound insulation, thermal conductivity and radioactivity of chipboards produced with cotton waste, fly ash and barite. Construction and Building Materials, 30, 826–832.

    Google Scholar 

  • Binici, H., Sevinc, A. H., & Eken, M. (2012c). Production of insulation material with sunflower sticks and textile wastes. Kahramanmaras Sutcu Imam. Journal of Engineering Sciences, 15, 1–5.

    Google Scholar 

  • Binici, H., Eken, M., & Aksogan, O. (2012d). Physical, mechanical and radiation permeability properties of slag, fly ash, silica sand and pumice based geopolymers. Electronic Journal of ConstructionTechnologies, 8(2), 12–25.

    Google Scholar 

  • Binici, H., Aksogan, O., Sevinc, A. H., & Cinpolat, E. (2015). Mechanical and radioactivity shielding performances of mortars made with cement, sand and egg shells. Construction and Building Materials, 93, 1145–1150.

    Google Scholar 

  • British Standards Institution (2007). 13501-1 Fire classification of construction products and building elements. Classification Using Data from Reaction to Fire Tests.

  • Brooks, R., & Cetin, M. (2012). Application of construction demolition waste for improving performance of subgrade and subbase layers. International Journal of Research and Revies in Applied Science, 12(3), 375–381.

    CAS  Google Scholar 

  • Cetin, M. (2013a) Landscape engineering, protecting soil, and runoff storm water. In: Advances in landscape architecture-environ-mental sciences. Chapter 27. InTech-Open Science-Open Minds, Online July 1st, 2013. ISBN 978-953-51-1167-2, 697-722.

  • Cetin, M. (2013b) Pavement design with porous asphalt. PhD Thesis. Temple University. Philadelphia

  • Cetin, M. (2015a) Using recycling materials for sustainable landscape planning. In: Environment and ecology at the beginning of 21st century. Chapter 55. ST. Kliment Ohridski University Press, Sofia, ISBN:978-954-07-3999-1, 783-788. 821p.

  • Cetin, M. (2015b). Consideration of permeable pavement in landscape architecture. Journal of Environmental Protection and Ecology., 16(1), 385–392.

    Google Scholar 

  • Cetin, M. (2016). A change in the amount of CO2 at the center of the examination halls: case study of Turkey. Studies on Ethno-Medicine., 10(2), 146–155.

    Google Scholar 

  • Cetin, M. (2017). Change in amount of chlorophyll in some interior ornamental plants. Kastamonu University Journal of Engineering and Sciences., 3(1), 11–19.

    Google Scholar 

  • Cetin, M., Brooks, R., & Udo-Inyang, P. (2012a). An innovative design methodology of pavement design by limiting surface deflection. International Journal of Research and Reviews in Applied Sciences., 13(2), 607–610.

    Google Scholar 

  • Cetin, M., Brooks, R., & Udo-Inyang, P. (2012b). A comparative study between the results of an innovative design methodology by limiting surface deflection and AASHTO design method. International Journal of Research and Reviews in Applied Sciences, 13(2), 27.

    Google Scholar 

  • Cetin, M., Adiguzel, F., Kaya, O., & Sahap, A. (2018). Mapping of bioclimatic comfort for potential planning using GIS in Aydin. Environment, Development and Sustainability, 20(1), 361–375. https://doi.org/10.1007/s10668-016-9885-5.

    Article  Google Scholar 

  • Cülfik, M. S. (2001) Deterioration of bend between cement paste and aggregate at high temperatures. Boğaziçi University, Institute of Science and Technology, Ph.D. Thesis, Istanbul.

  • Demirel, B., & Kelestemur, O. (2011). High temperature pumice and silica fume additive to the mechanical and physical properties of curing age impact of concrete. Electronic Journal of Construction Technology, 7(1), 1–13.

    Google Scholar 

  • Ghosh, R. K., & Singh, N. (2013). Adsorption-desorption of metolachlor and atrazine in Indian soils: effect of fly ash amendment. Environmental Monitoring and Assessment, 185(2), 1833–1845.

    CAS  Google Scholar 

  • Gökcer, B., Yildiz, S., & Kelestemur, O. (2013). High temperature behavior of waste marble powder and glass fiber mortar samples Süleyman Demirel University. International Technology Science, 5(2), 42–55.

    Google Scholar 

  • Hossain, K. M. A. (2006). High strength blended cement concrete incorporating volcanic ash: performance at high temperatures. Cement and Concrete Composites, 28(6), 535–545.

    Google Scholar 

  • Kabeer, K. I. S. A., & Vyas, A. K. (2018). Utilization of marble powder as fine aggregate in mortar mixes. Construction and Building Materials, 165, 321–332.

    Google Scholar 

  • Kara, C., & Yazicioglu, S. (2016). Effect of carbonation of marble dust and silica fume. Bitlis Eren University. Journal of Science, 5(2), 191–202.

    Google Scholar 

  • Kaya, T., & Yazicioglu, S. (2015). Investigation of high temperature effect on the physical and mechanical properties of bentonite additive mortars with calcium calcium. Bitlis Eren University. Journal of Science and Technology, 4(2), 150–160.

    Google Scholar 

  • Kaya, E., Agca, M., Adiguzel, F., & Cetin, M. (2018). Spatial data analysis with R programming for environment. Human and Ecological Risk Assessment: An International Journal. https://doi.org/10.1080/10807039.2018.1470896.

  • Khodabakhshian, A., Ghalehnovi, M., De Brito, J., & Shamsabadi, E. A. (2018). Durability performance of structural concrete containing silica fume and marble industry waste powder. Construction and Building Materials., 165, 321–333.

    Google Scholar 

  • Khoury, G. A. (1992). Compressive strength of concrete at high temperatures: a reassessment. Magazine of Concrete Research, 44(161), 291–309.

    CAS  Google Scholar 

  • Köse, E. T., & Akyildiz, A. (2017). Cement based solidification/stabilization of red mud: leaching properties of heavy metals. PamFAkale University Journal of Engineering Sciences, 23(6), 741–747.

    Google Scholar 

  • Ling, T. C., Poon, C. S., Lam, W. S., Chan, T. P., & Fung, K. K. L. (2013). X-ray radiation shielding properties of cement mortars prepared with different types of aggregates. Materials and Structures, 46(7), 1133–1141.

    CAS  Google Scholar 

  • Merkit, Z. Y., Ozarslan, C., Aydin, B., & Toplan, N. (2018). The effect of mechanical activation on CAS ceramics produced using zeolite and marble powder. Sakarya University Journal of Science, 22(2), 680–687.

    Google Scholar 

  • Neville, A. M. (2000). Properties of Concrete (Fourth ed.). New York: Longman Scientific and Technical.

    Google Scholar 

  • Nežerka, V., Slížková, Z., Tesárek, P., Plachý, T., Frankeová, D., & Petráňová, V. (2014). Comprehensive study on mechanical properties of limebased pastes with additions of metakaolin and brick dust. Cement and concrete research, 64, 17–29.

  • Öz, H. Ö. (2017). Fresh, Mechanical and Durability Properties of Self-Leveling Mortars Including Waste Glass Powder and Blast Furnace Slag. Kahramanmaraş Sütçü İmam University. Journal of Engineering Sciences, 20(4), 9–22.

    Google Scholar 

  • Özden, Ö. (2015). The Importance of Recycling in Environment and Economy. http://toplumhekimligi.istanbul.edu.tr/wp content / uploads / 2015/11 / The importance of recycle-environment-and-economics-Assist. Prof.

  • Pogrzeba, M., Galimska-Stypa, R., Krzyżak, J., & Sas-Nowosielska, A. (2015). Sewage sludge and fly ash mixture as an alternative for decontaminating lead and zinc ore regions. Environmental Monitoring and Assessment, 187(1), 4120.

    CAS  Google Scholar 

  • Saridemir, M. (2016). Resistance characteristics of different distributed diatomy mortars with alkali. Ömer Halisdemir University Journal Of Engineering Sciences, 5(2), 124–134.

    Google Scholar 

  • Sevinc A. H. (2011). Blast furnace slag, pumice, barite and colemanite additive properties of mortars and concretes, Kahramanmaras Sutcu Imam University, Institute of Science, Master Thesis, Kahramanmaras.

  • Subasi, S., Öztürk, H., & Emiroğlu, M. (2017). Utilizing of waste ceramic powders as filler material in self-consolidating concrete. Construction and Building Materials, 149, 567–574.

    Google Scholar 

  • Tan, L. C., Choa, V., & Tay, J. H. (1997). The influence of pH on mobility of heavy metals from municipal solid waste incinerator fly ash. Environmental Monitoring and Assessment, 44(1-3), 275–284.

    CAS  Google Scholar 

  • Tang, W. C., & Lo, T. Y. (2009). Mechanical and fracture properties of normal-and high-strength concretes with fly ash after exposure to high temperatures. Magazine of Concrete Research, 61(5), 323–330.

    Google Scholar 

  • Tangüler, M., Gürsel, P., & Meral, C. (2015). Life cycle analysis for fly ash concretes in Turkey. 9th National Concrete Congress, 431-441.

  • Tokyay, M. (2013). The role of FA, GBFS and SD in concrete: present knowledge. Concrete 2013 Ready-Mixed Concrete Congress, 21-23 February, 201-238.

  • Türker, P., Erdoğan, B., Katnaş, F., & Yeğinobali, A. (2009). Classification and characteristics of fly ash in Turkey. TCMB: Ankara.

    Google Scholar 

  • Ünal, O., Uygunoglu, T. (2004). The evaluation of soma thermal power plant waste integrated culture in construction sector. Proceedings of the 14th Coal Congress of Turkey, Zonguldak.

  • Unal S., Yucel O., Kurt M., Gul S. (2014), Iron-steel slag from waste to product, Advanced technologies workshop, 255–267.

  • Varol, T., Ertuğrul, M., Özel, H. B., Emir, T., & Çetin, M. (2019). The effects of rill erosion on unpaved forest road. Applied Ecology and Environmental Research, 17(1), 825–839. https://doi.org/10.15666/aeer/1701_825839.

    Article  Google Scholar 

  • Xenidis, A., Mylona, E., & Paspaliaris, I. (2002). Potential use of lignite fly ash for the control of acid generation from sulphidic wastes. Waste Management, 22(6), 631–641.

    CAS  Google Scholar 

  • Yiğiter M. (2014). Production of plaster material from industrial wastes with short staple fiber character. Hitit University, Master Thesis, Corum.

  • Yildiz, S., Aliser, B., & Kelestemur, O. (2017). Investigation of mechanical and physical properties of waste mortar powder and glass fiber reinforced cement mortars under sulphate effect, Firat University. Science Journal., 29(2), 23–31.

    Google Scholar 

  • Yilmaz, M. (2012). Turkey’s energy potential and the importance of renewable energy sources for electricity production. Ankara University Journal of Environmental Studies, 4(2), 33–54.

    Google Scholar 

  • Yilmaz Y. (2014). The effects of using fly ash and blast furnace slag on concrete production and cost analysis, Namik Kemal University, Master Thesis, Tekirdağ.

Download references

Author information

Authors and Affiliations

  1. Faculty of Engineering and Architecture, Department of Civil Engineering, Kastamonu University, Kuzeykent, Kastamonu, Turkey

    Oguzhan Yavuz Bayraktar

Authors
  1. Oguzhan Yavuz Bayraktar
    View author publications

    Search author on:PubMed Google Scholar

Corresponding author

Correspondence to Oguzhan Yavuz Bayraktar.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bayraktar, O.Y. The possibility of fly ash and blast furnace slag disposal by using these environmental wastes as substitutes in portland cement. Environ Monit Assess 191, 560 (2019). https://doi.org/10.1007/s10661-019-7741-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10661-019-7741-4

Keywords