Abstract
In this work, a new method for the quantification of methyl violet cationic dye sorption onto SBA-15 mesoporous silica was developed. This method related the intensity of coloration of SBA-15 samples (after reached equilibrium sorption) within dye concentration in aqueous solution using Image-Pro Plus software. The sorption process of methyl violet dye onto SBA-15 was analyzed varying different initial parameters (dye concentration, mass of sorbent, pH of dye solution, and contact sorption time). SBA-15 proved as efficient sorbent for removal of methyl violet dye in contact time of 5 min, with maximum percentage of dye removal 99 % at pH 8. The results obtained from Image-Pro Plus showed to be in good agreement with the sorption parameters obtained by UV/Vis spectroscopy, which has been the most commonly used instrument for quantification of dye sorption. The image analysis method proved well prediction of dye concentrations with maximum relative error of 1.83 %. The advantages of this method are low cost and reliable quantitative evaluation with minimum of time.
Similar content being viewed by others
References
Al-Degs, Y. S., El-Barghouthi, M. I., El-Sheikh, A. H., & Walker, G. M. (2008). Effect of solution pH, ionic strength, and temperature on adsorption behavior of reactive dyes on activated carbon. Dyes and Pigments, 77, 16–23.
Annadurai, G., Juang, R., & Lee, D. (2002). Use of cellulose based wastes for adsorption of dyes from aqueous solutions. Journal of Hazardous Materials B, 92, 263–274.
Asouhidou, D. D., Triantafyllidis, K. S., Lazaridis, N. K., Matis, K. A., Kim, S. S., & Pinnavai, T. J. (2009). Sorption of reactive dyes from aqueous solutions by ordered hexagonal and disordered mesoporous carbons. Microporous and Mesoporous Materials, 117, 257–267.
Ayad, M. M., & El-Nasr, A. A. (2010). Adsorption of cationic dye (methylene blue) from water using polyaniline nanotubes base. Journal of Physical Chemistry C, 114, 14377–14383.
Azizian, S., Haerifar, M., & Bashiri, H. (2009). Adsorption of methyl violet onto granular activated carbon: equilibrium, kinetics and modeling. Chemical Engineering Journal, 146, 36–41.
Barczyk, K., Mozgawa, W., & Król, M. (2014). Studies of anions sorption on natural zeolites. Spectrochimica Acta Part A: Molecular Biomolecular Spectroscopy, 133, 876–882.
Bonetto, L. R., Ferrarini, F., de Marco, C., Crespo, J. S., Guégan, R., & Giovanela, M. (2015). Removal of methyl violet 2B dye from aqueous solution using a magnetic composite as an adsorbent. Journal of Water Process Engineering, 6, 11–20.
Dar, A., Shafique, U., Anwar, J., Zaman, W., & Naseer, A. (2012). A simple spot test quantification method to determine formaldehyde in aqueous samples. Journal of Saudi Chemical Society. doi:10.1016/j.jscs.2012.12.002.
Dávila-Jimenez, M. M., Elizalde-Gonzalez, M. P., & Peláez-Cid, A. A. (2005). Adsorption interaction between natural adsorbents and textile dyes in aqueous solution. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 254(1–3), 107–114.
Dhaouadi, H., & M’Henni, F. (2009). Vat dye sorption onto crude dehydrated sewage sludge. Journal of Hazardous Materials, 164, 448–458.
Dobritoiu, R., & Patachia, S. (2013). A study of dyes sorption on biobased cryogels. Applied Surface Science, 285P, 56–64.
Ghosh, D., & Bhattacharyya, K. G. (2002). Adsorption of methylene blue on kaolinite. Applied Clay Science, 20, 295–300.
Greenwald, M. J., Redding, A. M., & Cannon, F. S. (2015). A rapid kinetic dye test to predict the adsorption of 2-methylisoborneol onto granular activated carbons and to identify the influence of pore volume distributions. Water Research, 68, 784–792.
Hameed, B. H. (2008). Equilibrium and kinetic studies of methyl violet sorption by agricultural waste. Journal of Hazardous Materials, 154, 204–212.
Hu, G., Heitmann, J. A., Rojas, O. J., Pawlak, J. J., & Argyropoulos, D. S. (2010). Monitoring cellulase protein adsorption and recovery using SDS-PAGE. Industrial & Engineering Chemistry Research, 49, 8333–8338.
Iskander, A. L., Khald, E. M., & Sheta, A. S. (2011). Zinc and manganese sorption behavior by natural zeolite and bentonite. Annals of Agricultural Sciences, 56, 43–48.
Karima, Z., Mathewa, A. P., Grahn, M., Mouzon, J., & Oksman, K. (2014). Nanoporous membranes with cellulose nanocrystals as functional entity in chitosan: removal of dyes from water. Carbohydrate Polymers, 112, 668–676.
Khan Rao, R. A., Khan, M. A., & Hameed, B. H. (2009). Sorption/desorption studies on some natural minerals for the removal of toxic organic pollutants from aqueous solution. Chemical Engineering Journal, 152, 421–427.
Kokunesoski, M., Gulicovski, J., Matovic, B., Logar, M., Milonjic, S. K., & Babic, B. (2010). Synthesis and surface characterization of ordered mesoporous silica SBA-15. Materials Chemistry and Physics, 124, 1248–1252.
Komissarchik, S., & Nyanikova, G. (2014). Test systems and a method for express detection of synthetic food dyes in drinks. LWT - Food Science and Technology, 58, 315–320.
Kruk, M., & Jaroniec, M. (2000). Characterization of the porous structure of SBA-15. Chemistry of Materials, 12, 1961–1968.
Li, W., Yue, Q., Tu, P., Ma, Z., Gao, B., Li, J., & Xu, X. (2011). Adsorption characteristics of dyes in columns of activated carbon prepared from paper mill sewage sludge. Chemical Engineering Journal, 178, 197–203.
Lin, Q., Pan, J., Lin, Q., & Liu, Q. (2013). Microwave synthesis and adsorption performance of a novel crosslinked starch microsphere. Journal of Hazardous Materials, 263, 517–524.
Liu, R., Zhang, B., Mei, D., Zhang, H., & Liu, L. (2011). Adsorption of methyl violet from aqueous solution by halloysite nanotubes. Desalination, 268, 111–116.
Mahmoodi, N. M. (2011). Equilibrium, kinetics, and thermodynamics of dye removal using alginate in binary systems. Journal of Chemical & Engineering Data, 56, 2802–2811.
Mall, I. D., Srivastava, V. C., & Agarwal, N. K. (2006). Removal of Orange-G and Methyl violet dyes by adsorption onto bagasse fly ash-kinetic study and equilibrium isotherm analyses. Dyes and Pigments, 69, 210–223.
Mitchell, P. J., Hanson, J. C., Quets-Nguyen, A. T., Bergeron, M., & Smith, R. C. (2007). A quantitative method for analysis of in vitro neurite outgrowth. Journal of Neuroscience Methods, 164, 350–362.
Moritz, M., & Geszke-Moritz, M. (2014). Application of nanoporous silicas as adsorbents for chlorinated aromatic compounds. A comparative study. Materials Science and Engineering: C, 41, 42–51.
Nesic, A., Velickovic, S., & Antonovic, D. (2012). Characterization of chitosan/montmorillonite membranes as adsorbents for Bezactiv Orange V-3R dye. Journal of Hazardous Materials, 209–210, 256–263.
Nesic, A., Velickovic, S., & Antonovic, D. (2013). Modification of chitosan by zeolite A and adsorption of Bezactive Orange 16 from aqueous solution. Composites: Part B, 53, 145–151.
Nesic, A. R., Velickovic, S. J., & Antonovic, D. G. (2014). Novel composite films based on amidated pectin for ctionic dye adsorption. Colloids and Surfaces B: Biointerfaces, 116, 620–626.
Nigam, P., Armour, G., Banat, I. M., Singh, D., & Marchant, R. (2000). Physical removal of textile dyes from efluents and solid-state fermentation of dye-adsorbed agricultural residues. Bioresource Technology, 72, 219–226.
Ofomaja, A. E. (2008). Kinetic study and sorption mechanism of methylene blue and methyl violet onto mansonia (Mansonia altissima) wood sawdust. Chemical Engineering Journal, 143, 85–95.
Oliveira, F. J. V. E., Maurıcio, A., Melo, J. R., & Airoldi, C. (2013). Inorganic–organic hybrids presenting high basic center content: SBA-15 incorporation, toxic metals sorption and energetic behavior. Materials Research Bulletin, 48, 1045–1056.
Ozdemir, Y., Doğan, M., & Alkan, M. (2006). Adsorption of cationic dyes from aqueous solutions by sepiolite. Microporous and Mesoporous Materials, 96, 419–427.
Panic, V. V., Madzarevic, Z. P., Volkov-Husovic, T., & Velickovic, S. J. (2013). Poly(methacrylic acid) based hydrogels as sorbents for removal of cationic dye basic yellow 28: Kinetics, equilibrium study and image analysis. Chemical Engineering Journal, 217, 192–204.
Perullini, M., Jobbágy, M., Laura Japas, M., & Bilmes, S. A. (2014). New method for the simultaneous determination of diffusion and adsorption of dyes in silica hydrogels. Journal of Colloid and Interface Science, 425, 91–95.
Prasad, K., Kumar, B., Chakravarthy, M., & Prabhu, G. (2012). Applications of ‘tissuequant’– a color intensity quantification tool for medical research. Computer Methods and Programs in Biomedicine, 106, 27–36.
Qadri, S., Ganoe, A., & Haik, Y. (2009). Removal and recovery ofacridine orange from solutions by use ofmagnetic nanoparticles. Journal of Hazardous Materials, 169, 318–323.
Qin, Y., Wang, Y., Wang, H., Gao, J., & Qu, Z. (2013). Effect of morphology and pore structure of SBA-15 on toluene dynamic adsorption/desorption performance. Procedia Environmental Sciences, 18, 366–371.
Reddy, D., & Lee, S. M. (2013). Application of magnetic chitosan composites for the removal of toxic metal and dyes from aqueous solutions. Advances in Colloid and Interface Science, 201–202, 68–93.
Ryoo, R., Ko, C. H., Kruk, M., Antoschshuk, V., & Jaroniec, M. (2000). Block-copolymer-templated ordered mesoporous silica: array of uniform pores or mesopore-micropore network. The Journal of Physical Chemistry B, 104, 11456–11471.
Safa, Y., & Bhatti, H. N. (2011). Biosorption of direct red-31 and direct orange-26 dyes by rice husk: application of factorial design analysis. Chemical Engineering Research and Design, 89, 2566–2574.
Samprovalaki, K., Robbins, P. T., & Fryer, P. J. (2012). A study of diffusion of dyes in model foods using a visual method. Journal of Food Engineering, 110, 441–447.
Santos, S. C. R., Vilar, V. J. P., & Boaventura, R. A. R. (2008). Waste metal hydroxide sludge as adsorbent for a reactive dye. Journal of Hazardous Materials, 153, 999–1008.
Xu, R., Xiao, S., Yuan, J., & Zhao, A. (2011). Adsorption of methyl violet from aqueous solutions by the biochars derived from crop residues. Bioresource Technology, 102, 10293–10298.
Xu, C., Tang, W., & Du, J. (2014). A nonlinear isotherm model for sorption of anionic dyes on cellulose fibers: a case study. Carbohydrate Polymers, 102, 808–812.
Zhu, Y. F., Shi, J. L., Shen, W. H., Dong, X. P., Feng, J. W., Ruan, M. L., & Li, Y. S. (2005). Stimuli-resonsive controlled drug release from a hollow mesoporous silica sphere/polyelectrolyte multilayer core-shell structure. Angewandte Chemie International Edition, 44, 5083–5087.
Acknowledgments
The authors thank Ministry of Education, Science and Technological Development of the Republic of Serbia, for support of this investigation through projects III-43009 and III-45012.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nesic, A.R., Kokunesoski, M.J., Volkov-Husovic, T.D. et al. New method for quantification of dye sorption using SBA mesoporous silica as a target sorbent. Environ Monit Assess 188, 160 (2016). https://doi.org/10.1007/s10661-016-5155-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10661-016-5155-0