Abstract
We propose paradigmatic examples to show how material damage phenomena can be efficiently described as a solid-solid phase transition. Starting from the pioneering work of J.L. Ericksen (J. Elast. 5(3):191–201, 1975) and the extensions of R.L. Fosdick and other authors to three-dimensional non linear elasticity, we describe the insurgence of damage as a hard → soft transition between two material states (damage and undamaged) characterized by two different energy wells. We consider the two separate constitutive assumptions of a simple Neo-Hookean type damageable material and a more complex microstructure inspired damageable Gent type material with variable limit threshold of the first invariant. In both cases we study two different deformation shear classes, one homogeneous and the other one inhomogeneous and obtain fully analytic description of the system damage response under cyclic loading. The considered constitutive assumptions and deformation classes are aimed at attaining fully analytic descriptions. On the other hand, we remark that the proposed, Griffith type, variational approach of damage, based on two different energy density functions for the damaged and undamaged material phases, and a resulting non (rank-one) convex energy, can be extended to systems with more complex energy functions, possibly with a larger number of wells representing an increasing degree of damage.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
The researchers interested in nonlinear elasticity and in particular in its role in describing phase transition phenomena are no doubt greatly indebted to J.L. Ericksen for his 1975 work Equilibrium of Bars [11], where in a simple and straightforward manner he extended the predictive power of this theory in considering the delicate problem of material instabilities and phase transition phenomena. After many efforts in determining so called constitutive inequalities for constitutive equations, not given by thermodynamics [21], he proposed a new approach in determining the correct form of constitutive assumptions. In his words [12] “my general experience tells me that it is neither wise nor fruitful to impose any restrictions upon the constitutive equations, in general... I merely propose adoption of the mathematician’s criterion: the weaker the hypothesis, the better the theorem”. The main assumption of [11] was the possibility of instability material domains, where the energy density was not rank-one convex, or in other words the possibility of multiwells energy densities. In the conclusion of [11] we read: “Linear elasticity theory is, by its nature, ill-designed to treat such problems, but we should not saddle nonlinear elasticity theory with deficiencies not inherent in it”.
Ericksen’s work has put the basis to enable us to review and understand non-linear elasticity in particular in the direction of prediction of the possible coexistence of equilibrium phases in material science. His seminal paper originated a stream of fundamental results that for more than twenty years reshaped the potential of a mathematical theory fundamental to all continuum mechanics, about many other J. Ball, R.D. James, M. Gurtin, J. Knowles, R. Abeyaratne, E Sternberg results in [1, 2, 4, 10, 20, 23, 24]. Very fruitful has then been the extension to the discrete versions of these models as proposed by I. Muller and P. Villaggio [25] and fully analyzed and adopted in the analysis of shape memory materials by G. Puglisi and L. Truskinovsky [29, 30]. Possible extension to the analysis of non local interactions, mimicking three dimensional effects have been considered in [26]. Recent extension to lower scales thermomechanical problems exhibited the efficacy of this type of approaches also for molecular scale material transition effects [13] and related multiscale modelling [31].
Roger Fosdick was not only one of the pioneers of this important extensions of non-linear elasticity to problems with non (rank-one) convex energy densities, as evidenced by his work with Dunn in 1980 [10], but he established fundamental results in the thermodynamics of continua and nonlinear elasticity theory representing a reference for the entire scientific community. First, the interest in deformation classes that, especially in the case of incompressible materials, reduces the general balance equations through the semi-inverse method to a less complex system of equations (e.g., from a system of PDEs to a system of ODEs) allowing for analytic solutions and deep results also in the complex field of three-dimensional non linear elasticity. Such analytical results allowed for a deeper physical interpretation with both theoretical interest and important applications for real problems. This series of pioneering works, beginning more or less in 1983 and continuing without interruption until 1996 [14–18], has been a landmark for an entire generation interested in the extension of classical methods of non-linear elasticity and thermodynamics.
This work is inspired to the recalled approaches in solving boundary values problems in continuum mechanics describing solid-solid phase transition phenomena. Specifically, we explore the possibility of describing damage phenomena in elastomeric materials modeled as a material hard→soft phase transition. In particular we consider elastomeric materials. These are amorphous materials and therefore their mesoscopic description is highly phenomenological typically based on the kinetic theory of rubber [34]. Despite this, it is widely recognized that approaches based on micro-mechanical interpretations allow for the deduction of very effective material modelling to describe both elastic and inelastic phenomena in rubber-like materials. Amorphous materials can be modelled as a mixture of different materials: in some sense a family of elastic materials [5, 6]. Their damage and fracture behavior can be considered as a homogenized effect of complex phenomena of links breaking and recrosslinking, corresponding to a distribution of activation and fracture thresholds of the different constituent materials at the microstructure scale. At low strains, the material response is mainly regulated by the molecular network properties such as intermolecular or chain-filler interactions. This first stage is characterized by a continuous phenomenon of link scission leading to a softening effect. On the contrary, at larger strain the behavior is mainly independent from the network properties such as density and type of strands, whereas it is regulated by the elastomeric matrix with a hardening effect induced by chains re-orientation.
A number of microstructure inspired or multiscale models have been proposed to describe the recalled phenomenology. We recall the papers by Rajagopal, Wineman, and others based on a continuous transition among different network natural configurations controlled by a scalar function of the strain invariants [22, 33, 35]. Here we consider a different approach based on the assumption of two distinct material phases, undamaged and damaged, characterized by a different energy density. In particular we focus on the simple case of isotropic materials and damage, and consider elastic energy of Neo-Hookean and Gent type. As well known in this case the energy depends on the only first invariant \(I_{1}\) of the left Cauchy Green tensor that gives a measure of the averaged (with respect to orientation) of molecule stretch at the network scale under the classical affinity hypothesis [34]. We then assume the existence of a damage threshold \(I_{1}=I_{cr}\) leading to a decreasing of the shear modulus \(\mu \). Based on the physical interpretation of \(\mu \) as proportional to the number of molecules per unit volume, this assumption corresponds to a transition to a state with a fraction of the molecules in the broken state. We then evaluate the corresponding dissipation. Based then on a Griffith type variational approach, we search for the minima of the total (elastic and damage) energy. As in the problems considered by Fosdick in [14–18], the resulting functional to be minimized is non-convex and for this reason it results in a coexistence of two phases: damaged and virgin material.
While the choice of two states, Neo-Hookean and Gent materials allow us for fully analytical description of the results, with a transparent physical interpretation, several extension of the models can be considered. In particular, we argue that by extending this approach to more phases can be fully descriptive of many damage effects and resulting localization phenomena [6].
1 Constitutive Assumptions
We consider here isotropic damageable incompressible materials. In particular, we analyze the simple case of a two-state (virgin and damaged) material. In the first state the system has a classical Neo-Hookean behavior with an energy density
whereas in the second state we consider again a Neo-Hookean behavior
where \(\alpha <1\) measures the damage in the material (damaged vs undamaged modulus) and \(\beta \) measures the dissipation associated with the damage effect. Here \(\boldsymbol{F}\) is the deformation gradient, \(\boldsymbol{B}=\boldsymbol{F}^{T}\boldsymbol{F}\) is the left Cauchy Green tensor and \(I_{1}=\boldsymbol{F}\cdot \boldsymbol{F}\) is its first invariant. Here and in the following we use the index \(u\) and \(d\) to denote the undamaged and damaged material phases, respectively.
While anisotropic effects can be very important in the description of damage and associated residual strains in soft materials [19, 31], here to focus on the main physical effect of describing damage as a material phase transition, we neglect anisotropic effects. As a result, following [9] we assume that damage is regulated by the only first invariant \(I_{1}\). In the case of macromolecular materials it is interesting to observe that \(I_{1}\) measures the average elongation along the different direction in each material point, thus if we assume, according with the classical affinity hypothesis [34], that the molecular deformations coincide with the macromolecular ones and that the damage depends on the macromolecular deformation, then we may assume that the damage is regulated by \(I_{1}\) itself. In particular, under our simplifying two-state hypothesis we assume that there exists a damage threshold \(I^{cr}_{1}\) such that the system is undamaged for \(I_{1}\in (0,I_{1}^{cr})\) and damaged for \(I_{1}\geq I_{1}^{cr}\). Thus the energy function is assigned by (see Fig. 1)
where
measures the dissipation function and \(I_{1}^{max}\) represents the maximum attained value of \(I_{1}\) in the loading history. Correspondingly the Cauchy stress is
Some comments are in order. By recalling that according with the statistical mechanics interpretation of the shear modulus we have \(\mu =N k_{B} T\), where \(N\) is the number of chains per unit volume, \(k_{B}\) is the Boltzmann constant, and \(T\) is the temperature. Moreover it is easy to interpret \(I_{1}\) as an averaged measure of the elongation in all directions. Thus the underlying physical idea of the model that due to damage a fraction \((1-\alpha )\) chains are broken in the damaged state. Thus under a simple isotropic assumption we simply describe damage as a variation of the parameter \(\mu \). Observe also that based on (1.2) we can give an energetic interpretation to the damage criterion. Indeed if the critical damage threshold \(I_{1}^{cr}\) is assigned, the ‘dissipated’ energy associated to damage is \(\frac{\mu \beta }{2}= \frac{\mu }{2} (1-\alpha ) (I_{1}^{cr}-3)\), i.e. the difference of the elastic energy in the undamaged and damaged state at the critical damage threshold.
It is important to observe that more general assumptions with more phases \(w_{i}(I_{1})=\frac{\alpha _{i} \mu}{2}(I_{1}-3) + \frac{\beta _{i} \mu}{2}\) can be considered, by assuming different limit conditions \(I_{1}^{max}=I_{i}^{cr}\), \(i=1,\ldots,n\). In this perspective (see [34]), we may relate the variation of the moduli to the variation of the number \(N\) of chains per unit volume, i.e. \(\alpha _{i} \sim \Delta N_{i}\), where \(\Delta N_{i}\) is the number of chains broken at the \(i\)-th step and similarly we may assume that the damage energy is proportional to \(\Delta N_{i}\). As a result we can assume a simple relation \(\beta _{i}= k \alpha _{i}\) with \(k\) a single constitutive parameter for the progressive damage. Possible extension to the case of a continuous distribution of damageable materials can be also considered [5, 8].
This simple assumption let us attain a full analytical treatment of the problem with a clear physical interpretation of the results, on the other hand it does not take in consideration important effects such as entropic hardening observed in rubberlike materials [28] and density and volume changes associated with damage induced cavitation effects [3].
Thus, as a second constitutive assumption, in order to take care of the hardening effect, we consider a damageable Gent energy
where \(J_{m}\) is a dimensionless parameter defined as \(J_{m} = I_{m} -3\) and \(I_{m}\) indicating the (damage dependent) limiting value for \(I_{1}\). This corresponds to a stress strain relation
In this case we assume \(\alpha >1\) that corresponds to both a decreasing of the tangent modulus in (1.5) and an increase of \(J_{m}\) to \(\alpha J_{m}\) due to damage. This can be again interpreted based on previous microstructure description. As the stretch increases the shortest molecules break. Thus, since \(J_{m}-3\) represents an averaged value of the stretch molecular threshold due to limit chain extensibility [27], after damage we can expect an increase of this value. The explicit dependence of \(\alpha \) and \(\beta \) can be deduced on the basis of microscopic considerations. For example, as described in details in [9] in the case of biopolymer materials or thermoplastic polyurethans [32], damage can be addressed to the progressive unfolding of hard domains into soft unfolded domains. As a result the number \(n\) of monomers (or Kuhn segments) increases. This corresponds to a variation of the contour length \(l_{c}\sim n\) so that \(\alpha \sim n^{3}\) if we consider the case of isotropic damage and the dissipation is \(\beta \sim N n\). In this case then we have \(\alpha \sim \beta ^{3}\). While we may assume that \(J_{m}\) depends only on the elastic part of the deformation, more general assumptions can be considered as in [9] where natural configuration variations and growth mechanics are considered in the constitutive assumptions. Moreover also in this case we may consider progressive damage.
In the simplest framework of a two phase Gent material, here considered, the dissipation energy can be evaluated as
which again represents the energy difference of the two states at the damage threshold \(I_{1}=I_{1}^{cr}\).
2 Damage as a Phase Transition
We now show through different explicit examples the possibility of describing physically based damage behaviors.
2.1 Piecewise Homogeneous Deformations: Simple Shear
Consider first the simple energetic assumption (1.1) for the rectangular body in Fig. 3 under the hypothesis of assigned displacement \(\delta \) and simple shear deformations \(\boldsymbol{f}\) assigned as
where by \(\boldsymbol{X}=(X,Y,Z)\) we denote a material point in the reference configuration and by \(\boldsymbol{x}=\boldsymbol{f}(\boldsymbol{X})=(x,y,z)\) its image under the deformation. The corresponding deformation gradient is then \(\boldsymbol{F}=\boldsymbol{I}+ k \boldsymbol{e_{1}}\otimes \boldsymbol{e_{2}}\), so that the left Cauchy Green tensor is \(\boldsymbol{B}=\boldsymbol{F}\boldsymbol{F}^{T}\). Thus,
and \(I_{1}=3+k^{2}\). Here and in the following we indicate with \(\boldsymbol{e}_{i}\), \(i=1,2,3\) the reference frame vectors.
2.1.1 Damageable Neo-Hookean Material
Consider first the case of damageable Neo-Hookean material \(\bar{\Phi}(\boldsymbol{F})=\Phi (I_{1})=\Phi (3+k^{2})=\phi (k)\) with
where \(I_{cr}=3+k_{cr}^{2}\).
The Cauchy stress is then given by \(\boldsymbol{T}=\mu \boldsymbol{B} - p \boldsymbol{I}\) and the Piola stress is given by \(\boldsymbol{S}=\mu \boldsymbol{F} - p \boldsymbol{F}^{-T}\) where \(p\) represents a pressure taking care of the incompressibility constraint. By imposing the boundary conditions \(T_{22}=T_{33}=0\) we obtain \(p=p_{u}= \mu \) for the undamaged phase and \(p=p_{d}=\alpha \mu \) for the damaged phase.
Thus,
with a shear stress
And for the damaged phase,
with a shear stress
According with previous constitutive hypothesis, under the normalizing assumption of unitary section in the \(\pi _{\boldsymbol{e}_{1},\boldsymbol{e}_{3}}\) plane, we may consider single phase solutions as in (2.1) with energy
where we imposed the kinematic constrain
We may then, by following classical approaches in the phase transition theory [20] and our energetic assumption, describe the evolution of damage as a phase transition phenomenon. While in the tridimensional case the analysis of continuum bodies with non (quasi)-convex energy densities constitute a very complex (typically not analytically solvable) mathematical problem, since we are here in the special cases of general Neo-Hookean material and under the special assumption on piecewise homogeneous shear deformations, as in the case of simple shear, with interfaces having normal \(\boldsymbol{n}\equiv \boldsymbol{e}_{2}\), we may use the necessary conditions to obtain local minimizers as in [20].
Thus if \(\boldsymbol{F}_{1}\) and \(\boldsymbol{F}_{2}\) are the deformation gradients corresponding to shears \(k_{1}\) and \(k_{2}\) respectively, the solutions must respect
Observe that the considered two phase solutions verify the kinematic compatibility Hadamard condition (\(\boldsymbol{n}\) being the normal to the interface)
and the equilibrium condition at the interface, namely
Thus, in the present case, we may reduce the three-dimensional problem within a one dimensional setting. Indeed we have to compare the single phase solution with energy (2.3) with two-phase solutions. We then search for the deformation minimizers \(k=\hat{k}(Y)\) of the total potential energy
with \(\tau \) representing a Lagrange multiplier taking care of the kinematical constraint (2.4) physically interpreted as the reaction shear applied by the constraint on the edge \(Y=L\). We are then lead to the classical Maxwell construction represented in Fig. 2. The two phases solutions according with (2.2) and (2.5) the Maxwell stresses and shears are:
We restrict here to the case of irreversible damage. Two points are worth of noticing; we are here neglecting all rate and interfacial energy effects. In other words time represents just an order parameter so that the results are rate-independent (invariant with respect to loading time rescaling) and all the solutions with fixed phase fractions are energetically equivalent. As a result, in the following we focus on the two phase solutions (see Fig. 3) with the body with \(0\leq Y\leq s\) in the undamaged regime and with \(s \leq Y\leq L\) in the damaged regime. This solution (or its symmetric) is chosen because it is the one with one single interface, so that it would be preferred if interfacial energy terms were considered.
We may then measure the damage by introducing the overall stiffness function
with the system in the virgin undamaged configuration \(\hat{\mu}=\mu \) for \(k_{max}\leq k_{a}\) with homogeneous elastic modulus \(\mu \) and in the fully damage configuration (damage saturation limit) if \(k_{max}\geq k_{b}\) with homogeneous damaged elastic modulus \(\hat{\mu}=\alpha \mu \).
Consider first the case of monotonic loading starting from the virgin configuration \(\hat{\mu}=\mu \). According with previous description and our hypothesis of total (elastic plus damage dissipated) energy minimization (corresponding to the convex envelope of the energy \(w\)), it is easy to show that, if we define the averaged assigned shear \(\bar{k}:=\frac{\delta}{L}\), the system remains in the virgin configuration \(s=L\) and
until
where by \(\bar{k}_{max}\) we indicate the maximum value of the past attained averaged shear (for monotonic loading \(\bar{k}=\bar{k}_{max}\)).
For \(\bar{k}\in (k_{a},k_{b})\) we have a two-phase configuration with
and a variable overall system stiffness
The system follows the transition plateaux \(\tau =\tau _{Max}\) until \(\bar{k}=k_{b}\) and the system is in the fully damaged configuration. For higher values of assigned displacement the system follows the fully damaged branch
Observe that we can extend easily previous considerations also when cyclic loading paths are considered. Thus if after monotonic loading with \(\bar{k}_{max}\in (k_{a}, k_{b})\) (path O-A-B in Fig. 3) we unload, the system behaves elastically, within a damaged state and a homogenized elastic modulus (2.9) (path B-O in the figure). If reloaded the system follows again the same path until \(\tau =\tau _{Max}\) and \(\bar{k}=\bar{k}_{max}\) (point B) and the system follows again the stress plateaux. The damage is complete and \(\hat{\mu}=\alpha \mu \) when \(\bar{k}_{max}=k_{b}\). Such conclusions are easily attained if one considers that at fixed \(k_{max}\) there is a fraction \(L-s(\bar{k}_{max})\) irreversibly damaged. Thus we can minimize the energy using again the same (local) conditions in (2.5) for the only undamaged fraction.
Possible healing effects, due to molecule recrosslinking, can be considered by following the approach in [7].
2.1.2 Damageable Gent Material
Consider now the constitutive assumptions (1.4), (1.5). In this case for the considered deformation class we have an energy \(\bar{\Phi}(\boldsymbol{F})=\Phi (I_{1})=\Phi (3+k^{2})=\phi (k)\) with
where the damage shear threshold is obtained by solving \(I_{cr}=3+k_{cr}^{2}\).
After imposing the boundary conditions for the one phase undamaged solution we have \(p=p_{u}=\frac{\mu J_{m}k^{2}}{J_{m}-k^{2}}\) corresponding to
When we consider the two phase solutions, in the damaged fraction we have
By following the same theoretical considerations of the previous case we are then lead to the variational problem in (2.7). Specifically the Maxwell rule leads to equations
that can be solved numerically to determine the (unique) solution \(k_{a}\), \(k_{b}\), \(\tau _{Max}\) (see Fig. 4).Footnote 1
Once determined these solutions we may obtain the overall behavior by following the same reasoning of the previous case with both monotonically loading (path O-A-C-D) and unloading paths (path O-A-B-O) as exhibited in Fig. 5 where dashed lines represent the (fixed damaged fraction) unloading force-displacement curves.
2.2 Inhomogeneous Deformations: Antiplane Shear for a Circular Cylinder
To show the effectiveness of the proposed model also for more complex non homogeneous deformations, we consider now a long hollow cylinder \(\mathcal {C}\) (see Fig. 6), bonded to a fixed rigid support at its outer radius \(R=R_{e}\) and to a rigid sleeve at its inner radius \(R=R_{i}=\bar{\rho}R_{e}\). We assume that a force per unit cylinder length \(F=2\pi R_{i} \tau _{i} \) is applied to the inner sleeve. We introduce the cylindrical coordinates \(\Theta \in (0, 2 \pi )\), \(R\in (R_{i},R_{e})\), and \(Z\in (0,L)\) and the corresponding local frame references \(\boldsymbol{e}_{\Theta}\), \(\boldsymbol{e}_{R}\), and \(\boldsymbol{e}_{Z}\). We assume the antiplane shear class [16]
where \(\rho :=\frac{R}{R_{e}}\) is the non dimensional radius and
represents an unknown, radius dependent, non dimensional displacement function along the cylinder axes direction. We finally denote by \(\delta =\frac{d}{R_{e}}\) the non dimensional displacement of the inner sleeve, so that we have
The deformation gradient is then
where
is the shear. Here we denote by \((\, . \,)'=\frac{d (\, . \,)}{dR}\) and by \(\dot{(\, . \,)}= \frac{d (\, . \,)}{d\rho}\). Thus we have the right Cauchy Green tensor is
with
2.2.1 Damageable Neo-Hookean Material
Under the Neo-Hookean assumption we obtain
where \(p_{u}\) and \(p_{d}\) are pressures taking care of the incompressibility constraint.
By imposing the boundary conditions
we obtain \(p_{u}=\mu \) and \(p_{d}=\alpha \mu \). As a result the first Piola stress tensor has the only non zero components
that for a fully undamaged state delivers
Consider first the one phase, fully undamaged solution. We obtain the local equilibrium equation
Observe that the same equation can be obtained by considering the minimization of the Gibbs energy density
corresponding to the Euler–Lagrange equation
and the natural boundary condition
where we introduced the non dimensional assigned axial force
This equation can be solved easily as
Thus by imposing \(w_{u}(1)=0\), we obtain
We then deduce the equilibrium shear strain and stress
Based on the previous assumption of a two-wells energy, we consider the possibility of two phase solutions. Since the shear decreases as \(\rho \) increases, we assume that there exists \(\rho _{Max} \in (\bar{\rho},1)\) such that the material is undamaged for \(\rho \in (\rho _{Max}, 1)\) and damaged for \(\rho \in (\bar{\rho}, \rho _{Max})\). Using (2.17) and (1.1) the non-dimensional total potential energy can written as
where in this case both the function \(w_{d}(\rho )\) in the damaged region and \(w_{u}(\rho )\) in the undamaged cylinder portion and \(\rho _{Max}\) have to be determined by energy minimization. The Euler Lagrange equations in both regions are again given by (2.24) as
whereas the natural conditions are
to which we add the continuity of the displacement at the interface and the assigned displacement at the external cylinder
Observe that in this way we respect the interface condition (\(\boldsymbol{n}_{R}\) being the normal to the interface)
and the equilibrium condition at the interface
The equilibrium configurations are then obtained by imposing the boundary condition (2.32) and (2.33) to the equilibrium equations (2.31)
By following the same consideration in (2.5), that can be considered as classical Weierstrass Erdman corner conditions, corresponding to determine the convex envelope of the energy assigned by (2.8). In this case, based on the described monotonicity results of the stress, we have that the two phase solutions are geometrically characterized by a stress-dependent interface \(\rho _{Max}(t)\) such that the system is undamaged for \(\rho \in (\bar{\rho}, \rho _{Max}(t))\) and damaged for \(\rho \in (\rho _{Max}(t), 1)\). The solution can be determined by the following equilibrium condition at the interface: \(\tau _{d}(\rho _{Max})=\tau _{u}(\rho _{Max})=\tau _{max}=\sqrt{ \frac{\alpha \beta}{1-\alpha}}\mu \) that gives
We remark that in both undamaged and damaged phases the system respects the same variation of the shear stress
and shear strains
Observe that the system is in the fully undamaged configuration if \(\rho _{Max}(t)<\bar{\rho}\), i.e. for \(t<\frac{\bar{\rho}\tau _{Max}}{\mu }\). On the other hand the system is in the fully damaged configuration when if \(\rho _{Max}(t)>1\), i.e. for \(t>\frac{\tau _{Max}}{\mu }\). Moreover in the two phase regime, when the cylinder is partially damaged, the global (average) force-displacement relation is given by
By using (2.27) we may synthesize the obtained behavior by considering a monotonically increasing loading \(\tau _{i}\).
The system behaves as follows
The global shear stress displacement curve is represented in Fig. 6 and the corresponding elastica in Fig. 7.
2.2.2 Damageable Gent Material
When a damageable Gent material is considered for the hollow cylindrical shape, by using (1.5), (2.19) and (2.15), (2.16) we obtain the stresses
The only non trivial local equilibrium equation (2.21) for the fully undamaged configuration
with the boundary conditions
Thus we have
We then obtain the displacement field
where we introduced the non-dimensional applied force per unit cylinder length
Correspondingly we find the shear stretch and stress
This solution represents the global minimum of the energy until \(\tau (\bar{\rho})=\tau _{Max}\), where \(\tau _{Max}\) is the solution of (2.11), i.e. for
where \(t_{Max}\) represents the maximum attained value of the non dimensional force \(t\).
If \(t\) is increased more, following the same discussion of previous sections, two phase solutions correspond to the global energy minimization, with an internal damaged portion of the hollow cylinder assigned by
where, by using (2.43)b, we obtain
In this case the displacement \(w_{d}(\rho )\) of the damaged fraction can be again determined by the Euler-Lagrange equilibrium condition (2.41) with the continuity boundary condition \(w_{d}(\rho _{Max})=w_{u}(\rho _{Max})\),
Correspondingly the shear stress and strain are given by
Two phase solutions with \(w=w_{d}(\rho )\), \(\rho \in (\bar{\rho}, \rho _{Max})\) and \(w=w_{u}(\rho )\), \(\rho \in (\rho _{Max},1)\) represent the global minima until the interface attains the external boundary \(\rho _{Max}=1\). Thus in this case two-phase solutions are global minimizers for
Finally for larger maximum attained forces the system is fully damaged with a displacement field
corresponding to shear stress and strain fields
The damage evolution, the elastica, and the force-displacement diagrams are reported in Fig. 8.
3 Concluding Remarks
We have shown the possibility of describing damage effects as a material phase transition phenomenon. Specifically we considered damageable versions of the Neo-Hookean and Gent constitutive assumptions for rubberlike incompressible materials. Thus the material is characterized by two states, damaged and undamaged. The damaged state is characterized by a lower shear modulus, interpreted as a fraction of broken molecules per unit volume at the network scale. We then assign, under an isotropic assumption of damage, a critical damage threshold, \(I_{1}=I_{1}^{cr}\), measuring a critical value of the averaged molecular stretch at each material point, inducing material damage. The hard→soft (undamaged→damaged) transition corresponds then to a finite energy dissipation, proportional to the broken chains’ fraction, that we deduce as a function of the threshold \(I_{1}^{cr}\). Many possible extension to more complex and realistic constitutive laws, possibly with more than one damaged state with progressive damage, can be considered. The choice of this paper has been guided from the aim of attaining fully analytical solutions, allowing for a clear physical interpretation of the results. Specifically we considered a Griffith type approach minimizing the global (elastic plus dissipated) energy, thus ending up to a variational problem with non (rank-one) convex energy that can be solved following the approaches suggested in many papers of Roger Fosdick to whom this paper is dedicated. Despite the simplicity of our considered constitutive assumptions, the model qualitatively reproduce well known effects in 3-D non linear damage mechanics that we show by considering the simple case of homogeneous simple shear and inhomogeneous antiplane shear deformation classes. We believe this paper can represent a ‘proof of concept’ on the possibility of efficiently study damage problems in the field of Griffith type total energy minimization models with non-convex energies.
Notes
The unicity follows by observing that the shear stress-strain relations \(\tau _{d}(k), \tau _{u}(k)\), are both monotonic convex functions with \(\tau _{d}(k)<\tau _{u}(k), k>0\). Thus if we denote \(k_{u}(\bar{\tau})\) and \(k_{d}(\bar{\tau})\) the inverse functions, the integral \(\int _{k_{u}(\bar{\tau})}^{k_{cr}}(\tau _{u}(k)-\bar{\tau}) \, dk - \int _{k_{cr}}^{k_{d}(\bar{\tau})}(\bar{\tau}-\tau _{d}(k)) \, dk\), representing a \(\bar{\tau}\) dependent driving force, is a strictly monotonic decreasing function that is positive at \(\bar{\tau}=\tau _{d}(k_{cr})\) and negative at \(\bar{\tau}=\tau _{u}(k_{cr})\). It thus attains a unique solution at the Maxwell stress \(\bar{\tau}=:\tau _{Max}\).
References
Abeyaratne, R., Knowles, J.K.: On the driving traction acting on a surface of strain discontinuity in a continuum. J. Mech. Phys. Solids 38(3), 345–360 (1990)
Abeyaratne, R., Knowles, J.K.: Kinetic relations and the propagation of phase boundaries in solids. Arch. Ration. Mech. Anal. 114(2), 119–154 (1991)
Aït Hocine, N., Hamdi, A., Naït Abdelaziz, M., Heuillet, P., Zaïri, F.: Experimental and finite element investigation of void nucleation in rubber-like materials. Int. J. Solids Struct. 48(9), 1248–1254 (2011)
Ball, J.M., James, R.D.: Fine Phase Mixtures as Minimizers of Energy, pp. 647–686. Springer, Berlin (1989)
De Tommasi, D., Puglisi, G., Saccomandi, G.: A micromechanics-based model for the Mullins effect. J. Rheol. 50(4), 495–512 (2006)
De Tommasi, D., Puglisi, G., Saccomandi, G.: Localized versus diffuse damage in amorphous materials. Phys. Rev. Lett. 100(8), 085502 (2008)
De Tommasi, D., Marzano, S., Puglisi, G., Zurlo, G.: Damage and healing effects in rubber-like balloons. Int. J. Solids Struct. 46(22), 3999–4005 (2009)
De Tommasi, D., Marzano, S., Puglisi, G., Saccomandi, G.: Localization and stability in damageable amorphous solids. Contin. Mech. Thermodyn. 22(1), 47–62 (2010)
De Tommasi, D., Puglisi, G., Saccomandi, G.: Multiscale mechanics of macromolecular materials with unfolding domains. J. Mech. Phys. Solids 78, 154–172 (2015)
Dunn, J.E., Fosdick, R.L.: The morphology and stability of material phases. Arch. Ration. Mech. Anal. 74(1), 1–99 (1980)
Ericksen, J.L.: Equilibrium of bars. J. Elast. 5(3), 191–201 (1975)
Ericksen, J.: Special topics in elastostatics. Adv. Appl. Mech. 17, 189–244 (1977)
Florio, G., Puglisi, G.: Unveiling the influence of device stiffness in single macromolecule unfolding. Sci. Rep. 9(1), 4997 (2019)
Fosdick, R.L., MacSithigh, G.: Helical shear of an elastic, circular tube with a non-convex stored energy. Arch. Ration. Mech. Anal. 84(1), 31–53 (1983)
Fosdick, R., Zhang, Y.: The torsion problem for a nonconvex stored energy function. Arch. Ration. Mech. Anal. 122(4), 291–322 (1993)
Fosdick, R., Zhang, Y.: Coexistent phase mixtures in the anti-plane shear of an elastic tube. Z. Angew. Math. Phys. 45(2), 202–244 (1994)
Fosdick, R., Zhang, Y.: A structured phase transition for the antiplane shear of an elastic circular tube. Q. J. Mech. Appl. Math. 48(2), 189–210 (1995)
Fosdick, R., MacSithigh, G., Rajagopal, K.: A plane nonlinear shear for an elastic layer with a nonconvex stored energy function. Int. J. Solids Struct. 22(10), 1129–1135 (1986)
Göktepe, S., Miehe, C.: A micro–macro approach to rubber-like materials. Part iii: the micro-sphere model of anisotropic Mullins-type damage. J. Mech. Phys. Solids 53(10), 2259–2283 (2005)
Gurtin, M.E.: Two-phase deformations of elastic solids. Arch. Ration. Mech. Anal. 84(1), 1–29 (1983)
Hill, R.: On constitutive inequalities for simple materials—i. J. Mech. Phys. Solids 16(4), 229–242 (1968)
Huntley, H.E., Wineman, A.S., Rajagopal, K.R.: Stress softening, strain localization and permanent set in the circumferential shear of an incompressible elastomeric cylinder. IMA J. Appl. Math. 59(3), 309–338 (1997)
James, R.D.: Co-existent phases in the one-dimensional static theory of elastic bars. Arch. Ration. Mech. Anal. 72, 99–140 (1979)
Knowles, J.K., Sternberg, E.: On the failure of ellipticity of the equations for finite elastostatic plane strain. Arch. Ration. Mech. Anal. 63(4), 321–336 (1976)
Müller, I., Villaggio, P.: Condition of stability and wave speeds for fluid mixtures. Meccanica 11, 191–195 (1976)
Puglisi, G.: Nucleation and phase propagation in a multistable lattice with weak nonlocal interactions. Contin. Mech. Thermodyn. 19, 299–319 (2007)
Puglisi, G., Saccomandi, G.: The gent model for rubber-like materials: an appraisal for an ingenious and simple idea. Int. J. Non-Linear Mech. 68, 17–24 (2015). Mechanics of Rubber - in Memory of Alan Gent
Puglisi, G., Saccomandi, G.: Multi-scale modelling of rubber-like materials and soft tissues: an appraisal. Proc. R. Soc. A, Math. Phys. Eng. Sci. 472, 20160060 (2016)
Puglisi, G., Truskinovsky, L.: Mechanics of a discrete chain with bi-stable elements. J. Mech. Phys. Solids 48(1), 1–27 (2000)
Puglisi, G., Truskinovsky, L.: Thermodynamics of rate-independent plasticity. J. Mech. Phys. Solids 53, 655–679 (2005)
Puglisi, G., Tommasi, D.D., Pantano, M.F., Pugno, N.M., Saccomandi, G.: Micromechanical model for protein materials: from macromolecules to macroscopic fibers. Phys. Rev. E 96, 042407 (2017)
Qi, H., Boyce, M.: Stress–strain behavior of thermoplastic polyurethanes. Mech. Mater. 37(8), 817–839 (2005)
Rajagopal, K.R., Wineman, A.S.: A constitutive equation for nonlinear solids which undergo deformation induced microstructural changes. Int. J. Plast. 8(4), 385–395 (1992)
Rubinstein, M., Colby, R.H., et al.: Polymer Physics, vol. 23. Oxford university press, New York (2003)
Wineman, A.S., Rajagopal, K.R.: On a Constitutive Theory for Materials Undergoing Microstructural Changes (1990)
Funding
Open access funding provided by Politecnico di Bari within the CRUI-CARE Agreement.
G. Puglisi has been supported by the Prin Project 2017KL4EF3 and by Gruppo Nazionale per la Fisica Matematica (GNFM) of the Istituto Nazionale di Alta Matematica (INdAM). D. De Tommasi by the Prin Project 2017J4EAYB-001 and by Gruppo Nazionale per la Fisica Matematica (GNFM). G. Saccomandi has been supported by Gruppo Nazionale per la Fisica Matematica (GNFM) of the Istituto Nazionale di Alta Matematica (INdAM).
Author information
Authors and Affiliations
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
The paper is dedicated to Professor Roger Lee Fosdick on the occasion of his 85-th birthday with sincere friendship and gratitude
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Bucchi, A., De Tommasi, D., Puglisi, G. et al. Damage as a Material Phase Transition. J Elast 154, 325–344 (2023). https://doi.org/10.1007/s10659-023-10014-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10659-023-10014-z