Abstract
It is shown that a two-dimensional analogy exists between an inviscid incompressible fluid flow around two finite-length flat plates (Riabouchinsky problem) and that of a straight slot cut in a linear elastic plate having rounded ends that are on the verge of yielding plastically. For the plates, a uniform flow at infinity is assumed in a direction perpendicular to the side-by-side parallel lines that constitute the two-dimensional geometry of the plates. Correspondingly, the slot has a boundary condition at infinity of a uniform shear traction in the antiplane direction. In the fluid flow problem, two free streamlines form at both ends of the flat plates, while in the slotted plate problem, the rounded ends of the traction-free slot surfaces constitute ligaments of perfectly plastic material. The specific shape of the rounded ends of the slot problem can be inferred by analogy with the fluid flow problem.
Similar content being viewed by others
References
Ambramowitz, M., Stegun, I.A.: Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables. AMS, vol. 55. National Bureau of Standards, Washington (1964)
Biot, M.A.: A hydrodynamic analogy for shearing stress distribution in bending. J. Appl. Phys. 9, 39–43 (1938)
Bui, H.D., Ehrlacher, A.: Propagation of damage in elastic and plastic solids. In: Francois, D., et al. (eds.) Advances in Fracture Research (Fracture 81), Proc. 5th Inter. Conf. on Fract. (ICF5), pp. 533–551. Pergamon Press, Oxford (1981)
Bui, H.D.: Fracture Mechanics Inverse Problems and Solutions, pp. 81–84. Springer, Dordrecht (2006)
De Bruijn, N.G.: Asymptotic Methods in Analysis, pp. 10–11. Dover, Mineola (1981)
Hult, J.A.H., McClintock, F.A.: Elastic-plastic stress and strain distributions around sharp notches under repeated shear. In: Ninth International Congress for Applied Mechanics, Brussels, vol. 8, pp. 51–58 (1956)
Knowles, J.K.: The finite anti-plane shear field near the tip of a crack for a class of incompressible elastic solids. Int. J. Fract. 13, 611–639 (1977)
Milne-Thomson, L.M.: Antiplane Elastic Systems, pp. 115–116. Springer, Berlin (1962)
Milne-Thomson, L.M.: Theoretical Hydrodynamics 5th edn. pp. 322–324. Dover, Mineola (1996)
Neuber, H.: Kerbspannungslehre 4th edn. pp. 17–18. Springer, Berlin (2001)
Riabouchinsky, D.: On steady fluid motions with free surfaces. Proc. Lond. Math. Soc. (2) 19(1), 206–215 (1921)
Rice, J.R.: Mathematical analysis in the mechanics of fracture. In: Liebowitz, H. (ed.) Fracture: An Advanced Treatise, vol. 2, pp. 191–311. Academic Press, New York (1968)
Timoshenko, S.: Strength of Materials, Part II, Advanced Theory and Problems 3rd edn. pp. 312–313. Van Nostrand, Princeton (1956)
Unger, D.J.: Analytical Fracture Mechanics. Dover, Mineola (2011)
Unger, D.J.: Linear elastic solutions for slotted plates. J. Elast. 108, 67–82 (2012)
Unger, D.J.: Erratum to: linear elastic solutions for slotted plates. J. Elast. 108, 83 (2012)
Unger, D.J.: Linear elastic solutions for slotted plates revisited. In: Floryan, J.M. (ed.) Contributions to the Foundations of Multidisciplinary Research in Mechanics, Papers Presented During the 24th International Congress of Theoretical and Applied Mechanics, ICTAM2016, Montreal, pp. 2042–2043 (2016)
Von Mises, R.: Mathematical Theory of Compressible Flow, pp. 241–244. Dover, Mineola (2004)
Zehnder, A.T.: Fracture Mechanics. Lecture Notes in Applied and Computational Mechanics, vol. 62, p. 14. Springer, Dordrecht (2012)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Unger, D.J. Free Streamline Hydrodynamic Analogy for a Linear Elastic Antiplane Slot Problem with Perfectly Plastic Ligaments at Its Ends. J Elast 132, 261–270 (2018). https://doi.org/10.1007/s10659-017-9667-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10659-017-9667-9