Abstract
Wood-plastic composites (WPCs), combined with wood particles as filler and plastic as matrix material, is a kind of sustainable (if recyclable polymer is used) and environment-friendly material. Additive manufacturing (AM), as its high-precision and cost-saving characteristics, provides the possibility for the formation of WPCs with complex structure. Therefore, this study systematically described the techniques and recent progress of WPCs formed by AM, including the preparation of original WPCs, preprocessing of WPCs used in AM, several available AM processes for WPCs, as well as current applications and prospects. This research is expected to lay the foundation for the high-value application of WPCs.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Data availability
No datasets were generated or analysed during the current study.
References
Ahmed W, Alnajjar F, Zaneldin E, Al-Marzouqi AH, Gochoo M, Khalid S (2020) Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite. Mater 13(18):4065. https://doi.org/10.3390/ma13184065
Ansari Movahed D, Jonoobi M, Ashori A, Mekonnen TH (2023) Life cycle assessment and mechanical properties of nanocomposites based on cellulose nanocrystals. Polym Eng Sci 63(6):1752–1760. https://doi.org/10.1002/pen.26321
Arias-Ferreiro G, Lasagabaster-Latorre A, Ares-Pernas A, Ligero P, Garcia-Garabal SM, Dopico-Garcia MS, Abad MJ (2022) Lignin as a High-Value Bioaditive in 3D-DLP Printable Acrylic Resins and Polyaniline Conductive Composite. Polymers-Basel 14(19):4164. https://doi.org/10.3390/polym14194164
Ashori A, Jonoobi M, Ayrilmis N, Shahreki A, Fashapoyeh MA (2019) Preparation and characterization of polyhydroxybutyrate-co-valerate (PHBV) as green composites using nano reinforcements. Int J Biol Macromol 136:1119–1124. https://doi.org/10.1016/j.ijbiomac.2019.06.181
Ashori A, Ayrilmis N, Heydari V (2023) Enhancing interfacial adhesion through coupling agent incorporation in plywood/ plastic waste composite materials. Int J Adhes Adhes 127:103513. https://doi.org/10.1016/j.ijadhadh.2023.103513
Ayrilmis N (2018) Effect of layer thickness on surface properties of 3D printed materials produced from wood flour/PLA filament. Polym Test 71:163–166. https://doi.org/10.1016/j.polymertesting.2018.09.009
Ayrilmis N, Kariz M, Kwon JH, Kuzman MK (2019) Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials. Int J Adv Manuf Tech 102(5–8):2195–2200. https://doi.org/10.1007/s00170-019-03299-9
Bae SU, Seo YR, Kim BJ, Lee M (2021) Effects of Wood Flour and MA-EPDM on the Properties of Fused Deposition Modeling 3D-printed Poly Lactic Acid Composites. Bioresources 16(4):7121–7137. https://doi.org/10.15376/biores.16.4.7122-7138
Bahar A, Hamami AEA, Benmahiddine F, Belhabib S, Belarbi R, Guessasma S (2023) The Thermal and Mechanical Behaviour of Wood-PLA Composites Processed by Additive Manufacturing for Building Insulation. Polymers-Basel 15(14):3056. https://doi.org/10.3390/polym15143056
Baran EH, Erbil HY (2019) Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review. Colloid Interfac 3(2):43. https://doi.org/10.3390/colloids3020043
Besliu-Bancescu I, Tamasag I, Slatineanu L (2023) Influence of 3D Printing Conditions on Some Physical-Mechanical and Technological Properties of PCL Wood-Based Polymer Parts Manufactured by FDM. Polymers-Basel 15(10):2305. https://doi.org/10.3390/polym15102305
Buschmann B, Henke K, Talke D, Saile B, Asshoff C, Bunzel F (2021) Additive Manufacturing of Wood Composite Panels for Individual Layer Fabrication (ILF). Polymers-Basel 13(19):3423. https://doi.org/10.3390/polym13193423
Chang LC, Sain M, Kortschot M (2014) Improvement in Compressive Behavior of Alkali-treated Wood Fibre-reinforced Bio-based Polyurethane Foams. Cell Polym 33(3):139–157. https://doi.org/10.1177/026248931403300302
Cho H-W, Baek S-H, Lee B-J, Jin H-E (2020) Orodispersible Polymer Films with the Poorly Water-Soluble Drug, Olanzapine: Hot-Melt Pneumatic Extrusion for Single-Process 3D Printing. Pharmaceutics 12(8):692. https://doi.org/10.3390/pharmaceutics12080692
Curtis PG, Slay CM, Harris NL, Tyukavina A, Hansen MC (2018) Classifying drivers of global forest loss. Science 361(6407):1108–1111. https://doi.org/10.1126/science.aau3445
de la Sancha NU, Boyle SA, McIntyre NE, Brooks DM, Yanosky A, Cuellar Soto E, Mereles F, Camino M, Stevens RD (2021) The disappearing Dry Chaco, one of the last dry forest systems on earth. Landscape Ecol 36(10):2997–3012. https://doi.org/10.1007/s10980-021-01291-x
Dong Y, Milentis J, Pramanik A (2018) Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites. Adv Manuf 6(1):71–82. https://doi.org/10.1007/s40436-018-0211-3
Eversmann P, Ochs J, Heise J, Akbar Z, Böhm S (2022) Additive Timber Manufacturing: A Novel, Wood-Based Filament and Its Additive Robotic Fabrication Techniques for Large-Scale Material-Efficient Construction. 3rd Print Addit Manuf 9(3):161–176. https://doi.org/10.1089/3dp.2020.0356
Feng XH, Wu ZH, Sang RJ, Wang F, Zhu YY, Wu MJ (2019) Surface Design of Wood-Based Board to Imitate Wood Texture Using 3D Printing Technology. Bioresources 14(4):8196–8211. https://doi.org/10.15376/biores.14.4.8196-8211
Fico D, Rizzo D, De Carolis V, Montagna F, Palumbo E, Corcione CE (2022) Development and characterization of sustainable PLA/Olive wood waste composites for rehabilitation applications using Fused Filament Fabrication (FFF). J Build Eng 56:104673. https://doi.org/10.1016/j.jobe.2022.104673
Finnes T (2015) High Definition 3D Printing – Comparing SLA and FDM Printing Technologies. J Undergrad Res 13:3
Francis JK, Pullan TT, Joseph M, Joe Thomas M, Joseph K (2023) Investigations on mechanical properties of wood composite for sustainable manufacturing. Mater Today Proc 72:3111–3115. https://doi.org/10.1016/j.matpr.2022.09.428
Fuentes L (2023) The 10 Most Amazing Wood 3D Print Files of 2023. https://all3dp.com/2/best-wood-3d-print/. Accessed 17 Jan 2023
Gao YQ, Ding JJ (2023) Multifunctional structural composite fibers in energy storage by extrusion-based manufacturing. J Mater Res 38(10):2615–2630. https://doi.org/10.1557/s43578-023-01014-9
Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams C, Wang C, Shin Y, Zhang S, Zavattieri P (2015) The Status, Challenges, and Future of Additive Manufacturing in Engineering. Comput Aided Design 69. https://doi.org/10.1016/j.cad.2015.04.001
Georgas M, Selinis P, Zardalidis G, Farmakis F (2023) Temperature Sensors by Inkjet Printing Compatible With Flexible Substrates: A Review. Ieee Sens J 23(1):21–33. https://doi.org/10.1109/jsen.2022.3213072
Guo R, Ren Z, Bi H, Song Y, Xu M (2018) Effect of toughening agents on the properties of poplar wood flour/poly (lactic acid) composites fabricated with Fused Deposition Modeling. Eur Polym J 107:34–45. https://doi.org/10.1016/j.eurpolymj.2018.07.035
Guo S, Li J, Zhang L, Li Y (2023) Preparation of high-porosity biomass-based carbon electrodes by selective laser sintering. Mater Lett 330:133300. https://doi.org/10.1016/j.matlet.2022.133300
Gupta AK, Taufik M (2021) Effect of process variables on performances measured in filament and pellet based extrusion process. Mater Today Proc 47:5177–5184. https://doi.org/10.1016/j.matpr.2021.05.508
Hausmann MK, Siqueira G, Libanori R, Kokkinis D, Neels A, Zimmermann T, Studart AR (2020) Complex-Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds. Adv Funct Mater 30(4):1904127. https://doi.org/10.1002/adfm.201904127
Hou W, Gu J, Hu C, Guan L, Liu Z (2019) Effects of medium density fiberboard substrate surface treatments on the coating performance of UV-curing inkjet printing. J for Eng 4(5):159–166
Huang YR, Loschke S, Proust G (2021) In the mix: The effect of wood composition on the 3D printability and mechanical performance of wood-plastic composites. Compos Part C: Open Access 5. https://doi.org/10.1016/j.jcomc.2021.100140
Islam MR, Beg MDH, Mina MF (2014) Fibre surface modifications through different treatments with the help of design expert software for natural fibre-based biocomposites. J Compos Mater 48(15):1887–1899. https://doi.org/10.1177/0021998313491515
Jandyal A, Chaturvedi I, Wazir I, Raina A, Ul Haq MI (2022) 3D printing – A review of processes, materials and applications in industry 4.0. Sustain Oper Comput 3:33–42. https://doi.org/10.1016/j.susoc.2021.09.004
Jiang J, Oguzlu H, Jiang F (2021a) 3D printing of lightweight, super-strong yet flexible all-cellulose structure. Chem Eng J 405:126668. https://doi.org/10.1016/j.cej.2020.126668
Jiang Q, Xu Y, Chen M, Meng Q, Zhang C (2021b) Modification of the wood-plastic composite for enhancement of formaldehyde clearance and the 3D printing application. J Appl Polym Sci 138(3):49683. https://doi.org/10.1002/app.49683
Jiang KY, Guo YL, Zeng WL, Xin ZS, Liu X (2010) Effect of Alkaline Treatment of Wood Flour on Strength of Wood-Plastic Composites for Selective Laser Sintering. Adv Mater Res 131–134. https://doi.org/10.4028/www.scientific.net/AMR.136.131
Jo MY, Ryu YJ, Ko JH, Yoon JS (2012) Effects of compatibilizers on the mechanical properties of ABS/PLA composites. J Appl Polym Sci 125:E231–E238. https://doi.org/10.1002/app.36732
Kaboorani A, Faezipour M, Ebrahimi G (2008) Feasibility of Using Heat Treated Wood in Wood/Thermoplastic Composites. J Reinf Plast Compos 27(16–17):1689–1699. https://doi.org/10.1177/0731684407084207
Kam D, Layani M, Minerbi SB, Orbaum D, Ben Harush SA, Shoseyov O, Magdassi S (2019) Additive Manufacturing of 3D Structures Composed of Wood Materials. Adv Mater Technol-Us 4(9). https://doi.org/10.1002/admt.201900158
Kantaros A, Diegel O (2018) 3D printing technology in musical instrument research: reviewing the potential. Rapid Prototyping J 24(9):1511–1523. https://doi.org/10.1108/RPJ-05-2017-0095
Kariz M, Sernek M, Kuzman MK (2016) Use of wood powder and adhesive as a mixture for 3D printing. Eur J Wood Wood Prod 74(1):123–126. https://doi.org/10.1007/s00107-015-0987-9
Kariz M, Kuzman MK, Sernek M (2017) Adhesive bonding of 3D-printed ABS parts and wood. J Adhes Sci Technol 31(15):1683–1690. https://doi.org/10.1080/01694243.2016.1268414
Kariz M, Sernek M, Obucina M, Kuzman MK (2018) Effect of wood content in FDM filament on properties of 3D printed parts. Mater Today Commun 14:135–140. https://doi.org/10.1016/j.mtcomm.2017.12.016
Khan SF, Zukhi MM, Zakaria H, Saad MAM (2019) Optimise 3D printing parameter on the mechanical performance of PLA-wood fused filament fabrication. IOP Conf Ser: Mater Sci Eng 670(1):012048. https://doi.org/10.1088/1757-899X/670/1/012048
Khan I, Kumar N, Yadav JS, Choudhary M, Chauhan A, Singh T (2023) Utilization of waste slate powder in poly(lactic acid) based composite for 3D printer filament. J Mater Res Technol 24:703–714. https://doi.org/10.1016/j.jmrt.2023.03.046
Khoshnava M, Rostami R, Ismail M, Valipour A (2014) The Using Fungi Treatment as Green and Environmentally Process for Surface Modification of Natural Fibres. Appl Mech Mater 554:116–122. https://doi.org/10.4028/www.scientific.net/AMM.554.116
Kong M, Qin Z, Zhang P, Xie G, Wang H, Wang J, Guan F, Yang W, Qiu Z (2023) Study on modified poplar wood powder/polylactic acid high toughness green 3D printing composites. Int J Biol Macromol 228:311–322. https://doi.org/10.1016/j.ijbiomac.2022.12.197
Krapež Tomec D, Kariž M (2022) Use of Wood in Additive Manufacturing: Review and Future Prospects. Polymers-Basel 14(6):1174. https://doi.org/10.3390/polym14061174
Kromoser B, Reichenbach S, Hellmayr R, Myna R, Wimmer R (2022) Circular economy in wood construction – Additive manufacturing of fully recyclable walls made from renewables: Proof of concept and preliminary data. Constr Build Mater 344:128219. https://doi.org/10.1016/j.conbuildmat.2022.128219
Latif M, Jiang Y, Kumar B, Song JM, Cho HC, Kim J (2022) High Content Nanocellulose 3D-Printed and Esterified Structures with Strong Interfacial Adhesion, High Mechanical Properties, and Shape Fidelity. Adv Mater Interfaces 9(16):2200280. https://doi.org/10.1002/admi.202200280
Latif M, Jiang Y, Kim J (2023) 3D printing of concentrated nanocellulose material: The critical role of substrates on the shape fidelity and mechanical properties. Carbohyd Polym 320:121197. https://doi.org/10.1016/j.carbpol.2023.121197
Le Duigou A, Bourmaud A, Balnois E, Davies P, Baley C (2012) Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle. Ind Crop Prod 39:31–39. https://doi.org/10.1016/j.indcrop.2012.02.001
Le Duigou A, Castro M, Bevan R, Martin N (2016) 3D printing of wood fibre biocomposites: From mechanical to actuation functionality. Mater Design 96:106–114. https://doi.org/10.1016/j.matdes.2016.02.018
Li VC-F, Kuang X, Mulyadi A, Hamel CM, Deng Y, Qi HJ (2019) 3D printed cellulose nanocrystal composites through digital light processing. Cellulose 26(6):3973–3985. https://doi.org/10.1007/s10570-019-02353-9
Li W, Wang M, Ma H, Chapa-Villarreal FA, Lobo AO, Zhang YS (2023) Stereolithography apparatus and digital light processing-based 3D bioprinting for tissue fabrication. Iscience 26(2):106039. https://doi.org/10.1016/j.isci.2023.106039
Liu LX, Lin MH, Xu Z, Lin MQ (2019) Polylactic Acid-based Wood-plastic 3D Printing Composite and its Properties. Bioresources 14(4):8484–8498. https://doi.org/10.15376/biores.14.4.8484-8498
Ma L, He H, Jiang C, Zhou L, Luo Y, Jia D (2012) Effect of alkali treatment on structure and mechanical properties of acrylonitrile–butadiene–styrene/bamboo fiber composites. J Macromol Sci Part B 51(11):2232–2244. https://doi.org/10.1080/00222348.2012.669688
Markstedt K, Escalante A, Toriz G, Gatenholm P (2017) Biomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing. Acs Appl Mater Inter 9(46):40878–40886. https://doi.org/10.1021/acsami.7b13400
Mazzanti V, Malagutti L, Mollica F (2019) FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties. Polymers-Basel 11(7):1094. https://doi.org/10.3390/polym11071094
Narlioglu N, Salan T, Alma MH (2021) Properties of 3D-Printed Wood Sawdust-Reinforced PLA Composites. Bioresources 16(3):5467–5480. https://doi.org/10.15376/biores.16.3.5467-5480
Nguyen DL, Luedtke J, Nopens M, Krause A (2023) Production of wood-based panel from recycled wood resource: a literature review. Eur J Wood Wood Prod 81(3):557–570. https://doi.org/10.1007/s00107-023-01937-4
Ning FD, Cong WL, Qiu JJ, Wei JH, Wang SR (2015) Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Compos Part B-Eng 80:369–378. https://doi.org/10.1016/j.compositesb.2015.06.013
Noureddine M (2019) Study of composite-based natural fibers and renewable polymers, using bacteria to ameliorate the fiber/matrix interface. J Compos Mater 53(4):455–461. https://doi.org/10.1177/0021998318785965
Petchwattana N, Channuan W, Naknaen P, Narupai B (2019) 3D Printing Filaments Prepared from Modified Poly(Lactic Acid)/Teak Wood Flour Composites: An Investigation on the Particle Size Effects and Silane Coupling Agent Compatibilisation. J Phys Sci 30(2):169–188. https://doi.org/10.21315/jps2019.30.2.10
Pommet M, Juntaro J, Heng JYY, Mantalaris A, Lee AF, Wilson K, Kalinka G, Shaffer MSP, Bismarck A (2008) Surface modification of natural fibers using bacteria: Depositing bacterial cellulose onto natural fibers to create hierarchical fiber reinforced nanocomposites. Biomacromol 9(6):1643–1651. https://doi.org/10.1021/bm800169g
Ragoubi M, Bienaime D, Molina S, George B, Merlin A (2010) Impact of corona treated hemp fibres onto mechanical properties of polypropylene composites made thereof. Ind Crop Prod 31(2):344–349. https://doi.org/10.1016/j.indcrop.2009.12.004
Rahmani H, Mahmoudi Najafi SH, Ashori A, Arab Fashapoyeh M, Aziz Mohseni F, Torkaman S (2020) Preparation of chitosan-based composites with urethane cross linkage and evaluation of their properties for using as wound healing dressing. Carbohyd Polym 230:115606. https://doi.org/10.1016/j.carbpol.2019.115606
Rao J, Zhou Y, Fan M (2018) Revealing the Interface Structure and Bonding Mechanism of Coupling Agent Treated WPC. Polymers-Basel 10(3):266. https://doi.org/10.3390/polym10030266
Reddy CR, Simon LC (2010) Surface Modification of Wood Fiber and Preparation of a Wood Fiber-Polypropylene Hybrid by In situ Polymerization. Macromol Mater Eng 295(10):906–914. https://doi.org/10.1002/mame.201000210
Romero-Ocaña I, Molina SI (2022) Cork photocurable resin composite for stereolithography (SLA): Influence of cork particle size on mechanical and thermal properties. Addit Manuf 51:102586. https://doi.org/10.1016/j.addma.2021.102586
Sachin SR, Kannan TK, Rajasekar R (2020) Effect of wood particulate size on the mechanical properties of PLA biocomposite. Pigm Resin Technol 49(6):465–472. https://doi.org/10.1108/PRT-12-2019-0117
Sang RJ, Manley AJ, Wu ZH, Feng XH (2020) Digital 3D Wood Texture: UV-Curable Inkjet Printing on Board Surface. Coatings 10(12):1144. https://doi.org/10.3390/coatings10121144
Shah SWA, Xu Q, Ullah MW, Zahoor SS, Morales GM, Sun J, Zhu D (2023) Lignin-based additive materials: A review of current status, challenges, and future perspectives. Addit Manuf 74:103711. https://doi.org/10.1016/j.addma.2023.103711
Shirazi SFS, Gharehkhani S, Mehrali M, Yarmand H, Metselaar HSC, Adib Kadri N, Osman NAA (2015) A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing. Sci Technol Adv Mat 16(3):033502. https://doi.org/10.1088/1468-6996/16/3/033502
Singh G, Missiaen JM, Bouvard D, Chaix JM (2021) Copper extrusion 3D printing using metal injection moulding feedstock: Analysis of process parameters for green density and surface roughness optimization. Addit Manuf 38. https://doi.org/10.1016/j.addma.2020.101778
Sun YF, Lee DB, Wang YP, Li SL, Ying JL, Liu XP, Xu GY, Gwon J, Wu QL (2020) Effect of Infill Value on Decay Resistance, Thermal, and Mechanical Properties of 3D Printed Polylactic Acid Composites Filled with Wood Fibers. Bioresources 15(3):6724–6734. https://doi.org/10.15376/biores.15.3.6724-6734
Syrlybayev D, Zharylkassyn B, Seisekulova A, Akhmetov M, Perveen A, Talamona D (2021) Optimisation of Strength Properties of FDM Printed Parts-A Critical Review. Polymers-Basel 13(10). https://doi.org/10.3390/polym13101587
Tanase-Opedal M, Espinosa E, Rodríguez A, Chinga-Carrasco G (2019) Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing. Mater 12(18):3006. https://doi.org/10.3390/ma12183006
Tao Y, Wang H, Li Z, Li P, Shi SQ (2017) Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing. Mater 10(4):339. https://doi.org/10.3390/ma10040339
Tao YB, Li ZL, Li P (2020) A Design and Fabrication Method for Wood-Inspired Composites by Micro X-Ray Computed Tomography and 3D Printing. Appl Sci-Basel 10(4):1400. https://doi.org/10.3390/app10041400
Tomec DK, Balzano A, Zigon J, Sernek M, Kariz M (2022) The Effect of Printing Parameters and Wood Surface Preparation on the Adhesion of Directly 3D-Printed PLA on Wood. J Renew Mater 10(7):1787–1796. https://doi.org/10.32604/jrm.2022.019760
Tsai MT, Wang PC (2023) Application of lignocellulosic composite (Taiwan incense-cedar) for digital light processing (DLP) in 3D printing. Wood Mater Sci Eng. https://doi.org/10.1080/17480272.2023.2199018
Väisänen A, Alonen L, Ylönen S, Hyttinen M (2022) Volatile organic compound and particulate emissions from the production and use of thermoplastic biocomposite 3D printing filaments. J Occup Environ Hyg 19(6):381–393. https://doi.org/10.1080/15459624.2022.2063879
Volpato N, Kretschek D, Foggiatto JA, Cruz C (2015) Experimental analysis of an extrusion system for additive manufacturing based on polymer pellets. Int J Adv Manuf Tech 81(9–12):1519–1531. https://doi.org/10.1007/s00170-015-7300-2
Wahab MS, Ibrahim M, Wagiman A (2013) Development of Wood-Based Composites Material for 3D Printing Process. Appl Mech Mater 315:987–991. https://doi.org/10.4028/www.scientific.net/AMM.315.987
Xu W, Wang X, Sandler N, Willför S, Xu C (2018) Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications. Acs Sustain Chem Eng 6(5):5663–5680. https://doi.org/10.1021/acssuschemeng.7b03924
Yang TC, Yeh CH (2020) Morphology and Mechanical Properties of 3D Printed Wood Fiber/Polylactic Acid Composite Parts Using Fused Deposition Modeling (FDM): The Effects of Printing Speed. Polymers-Basel 12(6):1334. https://doi.org/10.3390/polym12061334
Yang ZZ, Feng XH, Xu M, Rodrigue D (2021) Printability and Properties of 3D-printed Poplar Fiber/Polylactic Acid Biocomposite. Bioresources 16(2):2774–2788. https://doi.org/10.15376/biores.16.2.2774-2788
Yao J, Hakkarainen M (2023) Methacrylated wood flour-reinforced "all-wood" derived resin for digital light processing (DLP) 3D printing. Compos Commun 38. https://doi.org/10.1016/j.coco.2023.101506
Zeng WL, Guo YL, Jiang KY, Yu ZX, Liu Y, Shen YD, Deng JR, Wang PX (2013) Laser intensity effect on mechanical properties of wood-plastic composite parts fabricated by selective laser sintering. J Thermoplast Compos 26(1):125–136. https://doi.org/10.1177/0892705712461520
Zhang Y, Fang J, Li J, Guo Y, Wang Q (2017) The Effect of Carbon Nanotubes on the Mechanical Properties of Wood Plastic Composites by Selective Laser Sintering. Polymers-Basel 9(12):728. https://doi.org/10.3390/polym9120728
Zhang Y, Cui Y, Wang S, Zhao X, Wang F, Wu G (2020) Effect of microwave treatment on bending properties of carbon nanotube/wood plastic composites by selective laser sintering. Mater Lett 267:127547. https://doi.org/10.1016/j.matlet.2020.127547
Zhang S, Bhagia S, Li M, Meng X, Ragauskas AJ (2021a) Wood-reinforced composites by stereolithography with the stress whitening behavior. Mater Design 206:109773. https://doi.org/10.1016/j.matdes.2021.109773
Zhang Y, Wang F, Zhang Y, Li J, Guo Y (2021b) Effect of Al powder on mechanical properties and microstructure of wood-plastic composites by selective laser sintering. Mater Today Commun 27:102235. https://doi.org/10.1016/j.mtcomm.2021.102235
Zhao X, Tekinalp H, Meng X, Ker D, Benson B, Pu Y, Ragauskas AJ, Wang Y, Li K, Webb E, Gardner DJ, Anderson J, Ozcan S (2019) Poplar as Biofiber Reinforcement in Composites for Large-Scale 3D Printing. Acs Appl Bio Mater 2(10):4557–4570. https://doi.org/10.1021/acsabm.9b00675
Zhou X, Ren Z, Sun H, Bi H, Gu T, Xu M (2022) 3D printing with high content of lignin enabled by introducing polyurethane. Int J Biol Macromol 221:1209–1217. https://doi.org/10.1016/j.ijbiomac.2022.09.076
Acknowledgements
The authors would like to thank National Key Research and Development Program of China for financial support.
Funding
This work was funded by the National Key Research and Development Program of China (2023YFC3806900).
Author information
Authors and Affiliations
Contributions
Zhuo Zeng wrote the main manuscript text, as well as all the figures and tables. All authors reviewed the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Ethical approval
Ethics approval was not required for this research.
Consent for publication
All authors agreed to the publication in the submitted form.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zeng, Z., Zhou, Y., Wen, S. et al. A review: additive manufacturing of wood-plastic composites. Cellulose (2024). https://doi.org/10.1007/s10570-024-05916-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10570-024-05916-7