Abstract
Polylactic acid (PLA) fabric is a plant-based fibrous functional material that is considered promising for application in electronic device packaging due to its unique sustainability and safety characteristics. However, the hydrophobic properties of PLA fabric with a single structure hinder its liquid asymmetric wettability. In this work, bilayer polylactic acid@secondary alkyl sulfonate/cellulose (PLA@SAS/CE) fabrics were prepared with wettability and pore size gradients across the cross direction. A carding process was used to generate the cellulose layer, whereas a melt blowing process was used for preparing the PLA@SAS microfiber layer. The fabrics were then produced using a thermal composite process. The pore sizes of the obtained PLA@SAS microfiber layer could be tuned by air pressure, whereas the surface wetting capacity could be adjusted by altering the SAS mass concentration. By optimizing the wettability and pore size gradients, the resulting PLA@SAS/CE fabrics exhibited a high one-way transport capacity of 577.7 and a favorable liquid absorption rate of 54.0 mg/s, which demonstrated excellent asymmetric wettability. Moreover, the prepared PLA@SAS/CE fabric samples exhibited a sizeable breaking strength, excellent flexibility, and good printability, while demonstrated their potential in eco-friendly electronic device packaging.
Graphical abstract
Similar content being viewed by others
Data availability
The datasets generated and/or analyzed during the current study are available from the corresponding author on reasonable request.
References
Adekomaya O, Majozi T (2022) Sustainable application of biodegradable materials for thermal shield in electronic devices. J Mater Sci Eng B. https://doi.org/10.1016/j.mseb.2022.116197
Babar AA, Miao DY, Ali N, Ding B (2018) Breathable and Colorful Cellulose Acetate-Based Nanofibrous Membranes for Directional Moisture Transport. ACS Appl Mater Interfaces 10(26):22866–22875. https://doi.org/10.1021/acsami.8b07393
Bhanderi KK, Joshi JR, Patel JV (2023) Optimization process for glycolysis of poly (ethylene terephthalate) using bio-degradable & recyclable heterogeneous catalyst. J Indian Chem Soc 100(2):100904. https://doi.org/10.1016/j.jics.2023.100904
Chandrasekaran V, Senthilkumar P, Sakthivel JC (2018) Study on moisture management properties of Micro-Pore Ring-Spun Viscose Yarn-plated knitted fabrics. J Text Inst 109(11):1458–1464. https://doi.org/10.1080/00405000.2018.1423884
Chang L, Zhou YF, Dai K, Jiang L, Jerrams S, Ma JW, Chen SJ (2022) The effect of process parameters on the properties of elastic melt blown nonwovens: air pressure and DCD. J Appl Polym Sci 140(2):e53308. https://doi.org/10.1002/app.53308
Chen JX, Mai JZ, Wang C, Lin YY, Miao DY, Lin YQ, Ding B (2021) Biomimetic Aligned Micro-/Nanofibrous Composite Membranes with Ultrafast Water Transport and Evaporation for Efficient Indoor Humidification. ACS Appl Mater Interfaces. https://doi.org/10.1021/acsami.1c20193
Chen F, Ba QX, Lu WC, Liu J, Wu XL, Ji ZL, Chang C (2023) Preparation of combined oleophobic fibre filters with pore size gradients and their high-efficiency removal of oil mist droplets. Sep Purif Technol 306(PB):122653. https://doi.org/10.1016/j.seppur.2022.122653
Cheng NB, Miao DY, Wang XF, Wang Z, Ding B, Yu JY (2022) Review in functional textiles for personal rhermal and moisture comfort management. Journal of Textile Research 43 (10), 200–208. https://doi.org/10.13475/j.fzxb.20210401609
Dolzhikova VD, Bogdanova JG (2023) Influence of adsorption layers of polyelectrolytes on the wetting and modification of the polystyrene surface. Moscow Univ Chem Bull 6:331–337. https://doi.org/10.3103/S0027131423060044
Edaes SF, de Souza BC (2020) Conventional Plastics’ Harmful Effects and Biological and Molecular Strategies for Biodegradable Plastics’ Production. Curr Biotechnol 9(4):242–254. https://doi.org/10.2174/2211550109999201113102157
Gu YS, Wu J, Hu MM, Pi HH, Wang R, Zhang XQ (2021) Polylactic acid based Janus membranes with asymmetric wettability for directional moisture transport with enhanced UV protective capabilities. RSC Adv 12(1):32–41. https://doi.org/10.1039/D1RA07912C
Gulfam R, Chen Y (2022) Recent growth of wettability gradient surfaces: a review. Research 2022: 9873075. https://doi.org/10.34133/2022/9873075
Halloub A, Raji M, Essabir H, Nekhlaoui S, Bensalah MO, Bouhfid R, Qaiss AEK (2023) Stable smart packaging betalain-based from red prickly pear covalently linked into cellulose/alginate blend films. Int J Biol Macromol 234:123764–123764. https://doi.org/10.1016/j.ijbiomac.2023.123764
Jafari M, Shim E, Joijode A (2021) Fabrication of Poly(lactic acid) filter media via the meltblowing process and their filtration performances: A comparative study with polypropylene meltblown. Sep Purif Technol 260:118185. https://doi.org/10.1016/j.seppur.2020.118185
Jeppesen N, Mikkelsen LP, Dahl AB, Nymark AN, Dahl VA (2021) Quantifying effects of manufacturing methods on fiber orientation in unidirectional composites using structure tensor analysis. Compos Part A Appl Sci Manuf (prepublish). https://doi.org/10.1016/j.compositesa.2021.106541
Kamau-Devers K, Miller SA (2020) The environmental attributes of wood fiber composites with bio-based or petroleum-based plastics. Int J Life Cycle Assess 25(7):1145–1159. https://doi.org/10.1007/s11367-020-01744-6
Kasi V, Masud Rana M, Gopalakrishnan S, Heredia Rivera U, Yoon J, Cakmak M, Rahimi R (2024) Robust packaging of printed flexible electronics with functional SiOx coatings via cold atmospheric plasma assisted deposition. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2023.158671
Li BW, Ma YT, Njoku D, Meng MJ, Tang A, Li Y (2023) Design of anti-mildew smart microcapsules with chitosan as encapsulant for advanced electronic packaging epoxy coating. Prog Org Coat. https://doi.org/10.1016/j.porgcoat.2023.107568
Miao DY, Wang XF, Yu JY, Ding B (2021) A Biomimetic Transpiration Textile for Highly Efficient Personal Drying and Cooling. Adv Funct Mater. https://doi.org/10.1002/adfm.202008705
Mihankhah P, Azdast T, Mohammadzadeh H, Hasanzadeh R, Aghaiee S (2023) Fused filament fabrication of biodegradable polylactic acid reinforced by nanoclay as a potential biomedical material. J Thermoplast Compos Mater 36(3):961–983. https://doi.org/10.1177/08927057211044185
Moll P, Wang SF, Coutandin S, Fleischer J (2020) Fiber orientation measurement of fiber injection molded nonwovens by image analysis. Text Res J. https://doi.org/10.1177/0040517520948903
Qiu B, Wu DY, Xue MC, Ou L, Zhang YF, Xu F, Jin H, Gao Q, Zhuang J, Cen JZ, Lin B, Su YC, Chen SY, Sun DH (2024) 3D Aligned Nanofiber Scaffold Fabrication with Trench-Guided Electrospinning for Cardiac Tissue Engineering. Langmuir. https://doi.org/10.1021/acs.langmuir.3c03358
Selvam V, Jeyapaul T, Prakash K, Shanthini K, Anitha C (2023) Metal-free and fully recoverable MWCNT/g-C3N4 /chitosan nanocomposite thin film with excellent photocatalytic activity against organic pollutant degradation. Physica B 655:414726. https://doi.org/10.1016/j.physb.2023.414726
Shin H, Thanakkasaranee S, Sadeghi K, Seo J (2022) Preparation and characterization of ductile PLA/PEG blend films for eco-friendly flexible packaging application. Food Packag Shelf Life 34:100966. https://doi.org/10.1016/j.fpsl.2022.100966
Si YF, Wang T, Li CX, Yu CL, Li N, Gao C, Dong ZC, Jiang L (2018) Liquids unidirectional transport on dual-scale arrays. ACS Nano 12(9):9214–9222. https://doi.org/10.1021/acsnano.8b03924
Stoyanova N, Spasova M, Manolova N, Rashkov I, KamenovaNacheva M, Staleva P, TavlinovaKirilova M (2023) Electrospun PLA-based biomaterials loaded with melissa officinalis extract with strong antioxidant activity. Polymers 15(5):1070. https://doi.org/10.3390/polym15051070
Sun X, Mei C, French AD, Lee S, Wang Y, Wu Q (2018) Surface wetting behavior of nanocellulose-based composite films. Cellulose 25(9):5071–5087. https://doi.org/10.1007/s10570-018-1927-8
Wang Y, Xiao D, Zhong Y, Zhang L, Chen Z, Sui X, Wang B, Feng X, Xu H, Mao Z (2020) Facile fabrication of carboxymethyl chitosan/paraffin coated carboxymethylated cotton fabric with asymmetric wettability for hemostatic wound dressing. Cellulose 27(6):3343–3453. https://doi.org/10.1007/s10570-020-02969-2
Wang J, Shi QQ, Akankwasa NT, Zhang YZ, Wang J (2022) Establishment of the three-dimensional model of the nonwoven structure with fiber scale based on the GAN algorithm. Text Res J 92(9–10):1656–1665. https://doi.org/10.1177/00405175211067280
Watanabe K, Kusudo H, Bistafa C, Omori T, Yamaguchi Y (2022) Quantifying the solid-fluid interfacial tensions depending on the substrate curvature: young’s equation holds for wetting around nanoscale cylinder. J Chem Phys 156(5):054701. https://doi.org/10.1063/5.0079816
Wilke KL, Song Y, Lu Z, Wang EN (2022) Enhanced laplace pressures for functional surfaces: wicking, switchability, and selectivity. Adv Mater Interfaces 10(4):2201967. https://doi.org/10.1002/admi.202201967
Wu SH, Dong T, Li YR, Sun MC, Qi Y, Liu J, Duan B (2022) State-of-the-art review of advanced electrospun nanofiber yarn-based textiles for biomedical applications. Appl Mater Today 27:101473. https://doi.org/10.1016/j.apmt.2022.101473
Yesil Y, Bhat GS (2016) Structure and mechanical properties of polyethylene melt blown nonwovens. Int J Cloth Sci Technol 28(6):780–793. https://doi.org/10.1108/IJCST-09-2015-0099
Yanagishita T, Boushi Y (2023) Preparation of anodic porous alumina with gradient hole size for directional droplet transport. Langmuir : the ACS Journal of Surfaces and Colloids 39(2):862–869. https://doi.org/10.1021/acs.langmuir.2c02997
Zhang H, Zhen Q, Liu ZY, Cui JQ, Qian XM (2022a) Facile fabrication of polylactic acid/polyethylene glycol micro-nano fabrics with aligned fibrous roughness for enhancing liquid anisotropic wetting performance via double-stage drafting melt blowing process. Colloids Surf A 648:129174. https://doi.org/10.1016/j.colsurfa.2022.129174
Zhang J, Wang C, Xing H, Fu Q, Niu C, Lu L (2022b) Advances in Asymmetric Wettable Janus materials for oil-water separation. Molecules 27(21):7470. https://doi.org/10.3390/molecules27217470
Zou FD, Meng L, Li YF, Sun XX, Li ZM, Chen CJ, Han WL, Wang XH (2022) Analysis of polymer jet motion in the non-isothermal melt-blown process. Text Res J 92(21–22):4386–4402. https://doi.org/10.1177/00405175221104263
Funding
This work was supported by National Natural Science Foundation of China (52003306), Science & Technology Innovation Talents in Universities of Henan Province (24HASTIT011), Key Research Projects of Henan Higher Education Institutions (23A540003), Science & Technology Innovation Talents of Zhongyuan University of Technology (K2023YXRC01), and Graduate Research Innovation program of Zhongyuan University of Technology (YKY2023ZK02).
Author information
Authors and Affiliations
Contributions
The manuscript was written through contributions of all authors.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Conflict of Interest
The authors have no relevant financial or non-financial competing interests to disclose.
Consent for publication All authors reviewed and approved the manuscript.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhai, Q., Zhang, H., Cao, Y. et al. Design and fabrication of bilayer polylactic acid @ secondary alkyl sulfonate/cellulose fabrics with asymmetric wettability for the electronic device packaging. Cellulose (2024). https://doi.org/10.1007/s10570-024-05845-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10570-024-05845-5