Abstract
In this study, chlorodeoxyhydroxyethylcellulose (CDHC) was synthesized from hydroxyethylcellulose (HEC) through chlorination and then both HEC and CDHC were applied individually as additives within the methylammonium lead iodide (CH3NH3PbI3, MAPbI3) layers of perovskite solar cells (PVSCs). The architecture of the PVSCs was indium tin oxide/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate/MAPbI3:cellulose derivative/[6,6]-phenyl-C61-butyric acid methyl ester/Ag. The photovoltaic (PV) properties of the HEC- and CDHC-incorporated PVSCs were superior to those of the corresponding pristine PVSC prepared without an additive, a result of decreases in the number of grain boundary defects as well as increases in the crystal grain sizes, crystallinities, and absorption intensities of the modified perovskite films. Moreover, the polymer chains of CDHC, presenting chlorine atoms, were particularly beneficial for enhancing the crystal size and crystallinity of the MAPbI3 film, resulting in the highest absorbance and PV performance in this study being those of a CDHC-doped PVSC. Indeed, this CDHC-incorporated PVSC displayed a short-circuit current density of 17.73 mA cm−2, an open-circuit voltage of 0.96 V, a fill factor of 0.61, and a power conversion efficiency of 10.38%.
Graphic abstract
Similar content being viewed by others
References
Azpiroz JM, Mosconi E, Bisquert J, Angelis FD (2015) Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation. Energy Environ Sci 8:2118–2127. https://doi.org/10.1039/c5ee01265a
Bi DQ et al (2016) Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%. Nat Energy 1:16142. https://doi.org/10.1038/nenergy.2016.142
Chang CY et al (2015) Tuning perovskite morphology by polymer additive for high efficiency solar cell. ACS Appl Mater Interfaces 7:4955–4961. https://doi.org/10.1021/acsami.5b00052
Ciolacu D, Ciolacu F, Popa VI (2011) Amorphous cellulose—structure and characterization. Cellulose Chem Technol 45:13–21
Eissa AM, Khosravi E, Cimecioglu AL (2012) A versatile method for functionalization and grafting of 2-hydroxyethyl cellulose (HEC) via click chemistry. Carbohydr Polym 90:859–869. https://doi.org/10.1016/j.carbpol.2012.06.012
Eperon GE, Burlakov VM, Docampo P, Goriely A, Snaith HJ (2014) Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells. Adv Funct Mater 24:151–157. https://doi.org/10.1002/adfm.201302090
Guo YL, Shoyama K, Sato W, Nakamura E (2016) Polymer stabilization of lead(II) perovskite cubic nanocrystals for semitransparent solar cells. Adv Energy Mater 6:1502317. https://doi.org/10.1002/aenm.201502317
Huang Z et al (2016) Pure- or mixed-solvent assisted treatment for crystallization dynamics of planar lead halide perovskite solar cells. Solar Energy Mater Solar Cells 155:166–175. https://doi.org/10.1016/j.solmat.2016.06.011
Huang ZQ, Hu XT, Liu C, Tan LC, Chen YW (2017) Nucleation and crystallization control via polyurethane to enhance the bendability of perovskite solar cells with excellent device performance. Adv Funct Mater 27:1703061. https://doi.org/10.1002/adfm.201703061
Jeon NJ et al (2014) Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells. Nat Mater 13:897–903. https://doi.org/10.1038/nmat4014
Kim J, Lee SH, Lee JH, Hong KH (2014) The role of intrinsic defects in methylammonium lead iodide perovskite. J Phys Chem Lett 5:1312–1317. https://doi.org/10.1021/jz500370k
Li X et al (2016) A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells. Science 353:58–62. https://doi.org/10.1126/science.aaf8060
Liu YS et al (2016) Perovskite solar cells employing dopant-free organic hole transport materials with tunable energy levels. Adv Mater 28:440–446. https://doi.org/10.1002/adma.201504293
Liu C et al (2018) Grain boundary modification via F4-TCNQ to reduce defects of perovskite solar cells with excellent device performance. ACS Appl Mater Interfaces 10:1909–1916. https://doi.org/10.1021/acsami.7b15031
Nalwa KS et al (2012) Enhanced charge separation in organic photovoltaic films doped with ferroelectric dipoles. Energy Environ Sci 5:7042–7049. https://doi.org/10.1039/c2ee03478f
Nie W et al (2015) High-efficiency solution-processed perovskite solar cells with millimeter-scale grains. Science 347:522–525. https://doi.org/10.1126/science.aaa0472
Saliba M et al (2016a) Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy Environ Sci 9:1989–1997. https://doi.org/10.1039/c5ee03874j
Saliba M et al (2016b) Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science 354:206–209. https://doi.org/10.1126/science.aah5557
Sherkar TS et al (2017) Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions. ACS Energy Lett 2:1214–1222. https://doi.org/10.1021/acsenergylett.7b00236
Stranks SD et al (2013) Electron–hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342:341–344. https://doi.org/10.1126/science.1243982
Sun CY et al (2016) Enhanced photovoltaic performance of perovskite solar cells using polymer p(VDF-TrFE) as a processed additive. J Phys Chem C 120:12980–12988. https://doi.org/10.1021/acs.jpcc.6b05255
Wang J, Lin XY, Zhu H, Luo XG, Zhang JP (2014) Preparation, characterization, and adsorption properties of amino-alky cellulose for 2, 4, 6-trinitrotoluene. Polycycl Aromat Compd 34:372–387. https://doi.org/10.1080/10406638.2014.892889
Wu JL et al (2017) Simple mono-halogenated perylene diimides as non-fullerene electron transporting materials in inverted perovskite solar cells with ZnO nanoparticle cathode buffer layers. J Mater Chem A 5:12811–12821. https://doi.org/10.1039/C7TA02617J
Xiao MD et al (2014) A fast deposition–crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. Angew Chem Int Ed 53:9898–9903. https://doi.org/10.1002/anie.201405334
Xue QF et al (2015) Metallohalide perovskite–polymer composite film for hybrid planar heterojunction solar cells. RSC Adv 5:775–783. https://doi.org/10.1039/c4ra11739e
Yang B et al (2012) Tuning the energy level offset between donor and acceptor with ferroelectric dipole layers for increased efficiency in bilayer organic photovoltaic cells. Adv Mater 24:1455–1460. https://doi.org/10.1002/adma.201104509
Yang Y, Sun C, Yip HL, Sun RC, Wang XH (2016a) Chitosan-assisted crystallization and film forming of perovskite crystals through biomineralization. Chem Asian J 11:893–899. https://doi.org/10.1002/asia.201501425
Yang Y et al (2016b) Ammonium-iodide-salt additives induced photovoltaic performance enhancement in one-step solution process for perovskite solar cells. J Alloys Compd 684:84–90. https://doi.org/10.1016/j.jallcom.2016.05.154
Yang WS et al (2017) Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science 356:1376–1379. https://doi.org/10.1126/science.aan2301
Yin WJ, Shi T, Yan Y (2014) Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber. Appl Phys Lett 104:063903. https://doi.org/10.1063/1.4864778
Yuan YB et al (2011) Efficiency enhancement in organic solar cells with ferroelectric polymers. Nat Mater 10:296–302. https://doi.org/10.1038/nmat2951
Yuan YB et al (2012) Understanding the effect of ferroelectric polarization on power conversion efficiency of organic photovoltaic devices. Energy Environ Sci 5:8558–8563. https://doi.org/10.1039/c2ee22098a
Zhang F et al (2017) Isomer-pure bis-PCBM-assisted crystal engineering of perovskite solar cells showing excellent efficiency and stability. Adv Mater 29:1606806. https://doi.org/10.1002/adma.201606806
Zhao Y, Zhu K (2014) CH3NH3Cl-assisted one-step solution growth of CH3NH3PbI3: Structure, charge-carrier dynamics, and photovoltaic properties of perovskite solar cells. J Phys Chem C 118:9412–9418
Zhao Q et al (2016a) Improving the photovoltaic performance of perovskite solar cells with acetate. Sci Rep 6:38670. https://doi.org/10.1038/srep38670
Zhao T, Chueh CC, Chen Q, Rajagopal A, Jen AKY (2016b) Defect passivation of organic–inorganic hybrid perovskites by diammonium iodide toward high-performance photovoltaic devices. ACS Energy Lett 1:757–763. https://doi.org/10.1021/acsenergylett.6b00327
Zhao YC et al (2016c) A polymer scaffold for self-healing perovskite solar cells. Nat Commun 7:10228. https://doi.org/10.1038/ncomms10228
Zuo C, Ding L (2014) An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive. Nanoscale 6:9935–9938. https://doi.org/10.1039/c4nr02425g
Acknowledgments
We thank the Ministry of Science and Technology of Taiwan (MOST 107-2221-E-005-018) for financial support.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Chu, HY., Hong, JY., Huang, CF. et al. Enhanced photovoltaic properties of perovskite solar cells by the addition of cellulose derivatives to MAPbI3 based photoactive layer. Cellulose 26, 9229–9239 (2019). https://doi.org/10.1007/s10570-019-02724-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-019-02724-2