Abstract
The influence of enzymatic treatment on the thermal stability of cellulose nanofibrils (CNFs) was investigated. The unbleached bagasse pulp was treated with different dosages of xylanase, and samples were taken at different grinding stages. The produced CNF were characterized by Malvern Zetasizer, TEM, ATR-FTIR and XRD, and the thermal stability of the CNF was evaluated using TGA. The mechanism of enzymatic treatment on the thermal stability of CNF was proposed. The results indicated that all the diameters of produced CNF were < 100 nm. The CNF produced from original pulp has higher thermal stability than those from enzymatic-treated pulp, and the thermal stability of CNF was decreased with the increase of enzyme dosage. The practical application of CNF was actually limited by the reduction of pyrolysis sites, so the proper retention of hemicellulose and lignin in the process of preparing CNF contributes to the improvement of the thermal stability.
Graphical abstract
Similar content being viewed by others
References
Arola S, Malho JM, Laaksonen P, Lille M, Linder MB (2013) The role of hemicellulose in nanofibrillated cellulose networks. Soft Matter 9:1319–1326. https://doi.org/10.1039/c2sm26932e
Azubuike CP, Rodríguez H, Okhamafe AO, Rogers RD (2011) Physicochemical properties of maize cob cellulose powders reconstituted from ionic liquid solution. Cellulose 19:425–433. https://doi.org/10.1007/s10570-011-9631-y
Chen Y, Tshabalala MA, Gao J, Stark NM, Fan Y (2013) Color and surface chemistry changes of extracted wood flour after heating at 120°C. Wood Sci Technol 48:137–150. https://doi.org/10.1007/s00226-013-0582-3
Dhandapani R, Sharma S (2014) Environmentally benign pretreatments for producing microfibrillated cellulose fibers from hemp. Lightweight materials from biopolymers and biofibers. ACS symposium series, vol 1175. American Chemical Society, Washington. https://doi.org/10.1021/bk-2014-1175.ch005
French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–896
Gedler G, Antunes M, Realinho V, Velasco JI (2012) Thermal stability of polycarbonate-graphene nanocomposite foams. Polym Degrad Stab 97:1297–1304. https://doi.org/10.1016/j.polymdegradstab.2012.05.027
Gordobil O, Egüés I, Urruzola I, Labidi J (2014) Xylan–cellulose films: improvement of hydrophobicity, thermal and mechanical properties. Carbohydr Polym 112:56–62. https://doi.org/10.1016/j.carbpol.2014.05.060
Henriksson M, Henriksson G, Berglund LA, Lindström T (2007) An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers. Eur Polym J 43:3434–3441. https://doi.org/10.1016/j.eurpolymj.2007.05.038
Jacquet N et al (2011) Influence of steam explosion on the thermal stability of cellulose fibres. Polym Degrad Stab 96:1582–1588. https://doi.org/10.1016/j.polymdegradstab.2011.05.021
Jiang F, Hsieh Y-L (2013) Chemically and mechanically isolated nanocellulose and their self-assembled structures. Carbohydr Polym 95:32–40. https://doi.org/10.1016/j.carbpol.2013.02.022
Khouri S (2010) Experimental characterization and theoretical calculations of responsive polymeric systems. UWSpace
Kumar V, Yang T (2002) HNO3/H3PO4–NANO2 mediated oxidation of cellulose—preparation and characterization of bioabsorbable oxidized celluloses in high yields and with different levels of oxidation. Carbohydr Polym 48:403–412
Li W, Yang Y, Sha J, Zhou J, Qin C, Wang S (2018) The influence of mechanical refining treatments on the rheosedimentation properties of bleached softwood pulp suspensions. Cellulose 25:3609–3618
Lin X, Wu Z, Zhang C, Liu S, Nie S (2018) Enzymatic pulping of lignocellulosic biomass. Ind Crops Prod 120:16–24. https://doi.org/10.1016/j.indcrop.2018.04.033
Liu P, Guo X, Nan F, Duan Y, Zhang J (2017a) Modifying mechanical, optical properties and thermal processability of iridescent cellulose nanocrystal films using ionic liquid. ACS Appl Mater Interfaces 9:3085–3092. https://doi.org/10.1021/acsami.6b12953
Liu Y, Lu P, Xiao H, Heydarifard S, Wang S (2017b) Novel aqueous spongy foams made of three-dimensionally dispersed wood-fiber: entrapment and stabilization with NFC/MFC within capillary foams. Cellulose 24:241–251. https://doi.org/10.1007/s10570-016-1103-y
Long L, Tian D, Hu J, Wang F, Saddler J (2017) A xylanase-aided enzymatic pretreatment facilitates cellulose nanofibrillation. Biores Technol 243:898
Lu P, Hsieh Y-L (2010) Preparation and properties of cellulose nanocrystals: rods, spheres, and network. Carbohydr Polym 82:329–336. https://doi.org/10.1016/j.carbpol.2010.04.073
Martínez-Sanz M, Lopez-Rubio A, Lagaron JM (2011) Optimization of the nanofabrication by acid hydrolysis of bacterial cellulose nanowhiskers. Carbohydr Polym 85:228–236. https://doi.org/10.1016/j.carbpol.2011.02.021
Meng Q, Li H, Fu S, Lucia LA (2014) The non-trivial role of native xylans on the preparation of TEMPO-oxidized cellulose nanofibrils. React Funct Polym 85:142–150. https://doi.org/10.1016/j.reactfunctpolym.2014.07.021
Meng Q, Fu S, Lucia LA (2016) The role of heteropolysaccharides in developing oxidized cellulose nanofibrils. Carbohydr Polym 144:187–195. https://doi.org/10.1016/j.carbpol.2016.02.058
Milosavljevic I, Vahur Oja A, Suuberg EM (1996) Thermal effects in cellulose pyrolysis: relationship to char formation processes. Ind Eng Chem Res 35:653–662
Nair SS, Yan N (2015) Effect of high residual lignin on the thermal stability of nanofibrils and its enhanced mechanical performance in aqueous environments. Cellulose 22:3137–3150. https://doi.org/10.1007/s10570-015-0737-5
Nie S et al (2014) Kinetics study of oxidation of the lignin model compounds by chlorine dioxide. Chem Eng J 241:410–417. https://doi.org/10.1016/j.cej.2013.10.068
Nie S, Wang S, Qin C, Yao S, Ebonka JF, Song X, Li K (2015) Removal of hexenuronic acid by xylanase to reduce adsorbable organic halides formation in chlorine dioxide bleaching of bagasse pulp. Biores Technol 196:413–417. https://doi.org/10.1016/j.biortech.2015.07.115
Nie S, Zhang K, Lin X, Yan D, Liang H, Wang S (2018) Enzymatic pretreatment for the improvements of dispersion and film properties of cellulose nanofibrils. Carbohydr Polym 181:1136–1142. https://doi.org/10.1016/j.carbpol.2017.11.020
Nishiyama Y, Sugiyama J, Chanzy H, Langan P (2003) Crystal structure and hydrogen bonding system in cellulose Iα from synchrotron X-ray and neutron fiber diffraction. J Am Chem Soc 125:14300–14306. https://doi.org/10.1021/ja037055w
Peng X, Ren J, Zhong L, Sun R (2011) Nanocomposite films based on xylan-rich hemicelluloses and cellulose nanofibers with enhanced mechanical properties. Biomacromolecules 12:3321–3329. https://doi.org/10.1021/bm2008795
Peng Y, Gardner DJ, Han Y, Kiziltas A, Cai Z, Tshabalala MA (2013) Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity. Cellulose 20:2379–2392. https://doi.org/10.1007/s10570-013-0019-z
Quiévy N, Jacquet N, Sclavons M, Deroanne C, Paquot M, Devaux J (2010) Influence of homogenization and drying on the thermal stability of microfibrillated cellulose. Polym Degrad Stab 95:306–314. https://doi.org/10.1016/j.polymdegradstab.2009.11.020
Segal L, Creely J, Martin AJ, Conrad C (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794
Shafizadeh F (1982) Introduction to pyrolysis of biomass. J Anal Appl Pyrol 3:283–305
Shen DK, Gu S (2009) The mechanism for thermal decomposition of cellulose and its main products. Biores Technol 100:6496–6504. https://doi.org/10.1016/j.biortech.2009.06.095
Song X, Jiang Y, Rong X, Wei W, Wang S, Nie S (2016) Surface characterization and chemical analysis of bamboo substrates pretreated by alkali hydrogen peroxide. Biores Technol 216:1098–1101. https://doi.org/10.1016/j.biortech.2016.06.026
Stamm AJ (1956) Thermal degradation of wood and cellulose. Ind Eng Chem Ind Eng Chem 48:413–417
Valkenburg MEV, Vaughn RL, Williams M, Wilkes JS (2005) Thermochemistry of ionic liquid heat-transfer fluids. Thermochim Acta 425:181–188
Xu C, Cao L, Huang X, Chen Y, Lin B, Fu L (2017) Self-healing natural rubber with tailorable mechanical properties based on ionic supramolecular hybrid network. ACS Appl Mater Interfaces 9:29363–29373
Yao S, Nie S, Yuan Y, Wang S, Qin C (2015) Efficient extraction of bagasse hemicelluloses and characterization of solid remainder. Biores Technol 185:21–27. https://doi.org/10.1016/j.biortech.2015.02.052
Yao S, Nie S, Zhu H, Wang S, Song X, Qin C (2017) Extraction of hemicellulose by hot water to reduce adsorbable organic halogen formation in chlorine dioxide bleaching of bagasse pulp. Ind Crops Prod 96:178–185. https://doi.org/10.1016/j.indcrop.2016.11.046
Zhu G, Zhu X, Xiao Z, Yi F (2012) Study of cellulose pyrolysis using an in situ visualization technique and thermogravimetric analyzer. J Anal Appl Pyrol 94:126–130
Zhu H et al (2016) Wood-derived materials for green electronics, biological devices, and energy applications. Chem Rev 116:9305–9374. https://doi.org/10.1021/acs.chemrev.6b00225
Acknowledgments
This project was supported by the National Natural Science Foundation of China (31760192), the Scientific Research Foundation of Guangxi University (XGZ160166), and the Guangxi Natural Science Foundation of China (2016GXNSFBA380234).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, K., Zhang, Y., Yan, D. et al. Enzyme-assisted mechanical production of cellulose nanofibrils: thermal stability. Cellulose 25, 5049–5061 (2018). https://doi.org/10.1007/s10570-018-1928-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-018-1928-7