Advertisement

Cellulose

, Volume 25, Issue 7, pp 3885–3897 | Cite as

Comparison of the surface constitutions of hemicelluloses on lignocellulosic nanofibers prepared from softwood and hardwood

  • Akio Kumagai
  • Takashi Endo
Original Paper
  • 201 Downloads

Abstract

Lignocellulose nanofibers (LCNFs) were directly prepared from the wood powders of softwood from cryptomeria and hardwood from eucalyptus, and differences in the surface constitutions of the prepared LCNFs were studied via quartz crystal microbalance (QCM). QCM analyses indicated different results in the enzymatic hydrolysis of these LCNFs with a multicomponent cellulase mixture in the initial stage of the reaction, suggesting that LCNFs prepared from cryptomeria and eucalyptus had different surface constitutions. A QCM analysis of the enzymatic hydrolysis of LCNFs with a multicomponent cellulase mixture after individual treatments with xylanase and mannanase were also conducted, where the results suggested differences in the laminated structure of hemicelluloses located around the cellulose microfibrils composing the LCNFs of cryptomeria and eucalyptus. According to the QCM results, the cellulose microfibrils composing LCNFs prepared from the softwood of cryptomeria are likely integrally surrounded by glucomannan, meanwhile the cellulose microfibrils composing the LCNFs prepared from the hardwood of eucalyptus exhibited low numbers of hemicelluloses surrounding the cellulose microfibrils, where a portion of the surface of the cellulose microfibrils is likely to be exposed.

Keywords

Lignocellulose nanofiber Hemicellulose Quartz crystal microbalance Surface constitution Softwood Hardwood 

References

  1. Abe K, Iwamoto S, Yano H (2007) Obtaining cellulose nanofibers with a uniform width of 15 nm from wood. Biomacromol 8:3276–3278CrossRefGoogle Scholar
  2. Ahola S, Turon X, Österberg M, Laine J, Rojas OJ (2008) Enzymatic hydrolysis of native cellulose nanofibrils and other cellulose model films: effect surface structure. Langmuir 24:11592–11599CrossRefPubMedGoogle Scholar
  3. Åkerholm M, Salmén L (2001) Interactions between wood polymers studied by dynamic FT-IR spectroscopy. Polymer 42:963–969CrossRefGoogle Scholar
  4. Aulin C, Ahola S, Josefsson P, Nishino T, Hirose Y, Osterberg M, Wagberg L (2009) Nanoscale cellulose films with different crystallinities and mesostructures—their surface properties and interaction with water. Langmuir 25:7675–7685CrossRefPubMedGoogle Scholar
  5. Awano T, Takabe K, Fujita M (1998) Localization of glucuronoxylan in Japanese beech visualized by immunogold labelling. Protoplasma 202:213–222CrossRefGoogle Scholar
  6. Awano T, Takabe Y, Fujita M (2002) Xylan deposition on secondary wall of Fagus crenata fiber. Protoplasma 219:106–115CrossRefPubMedGoogle Scholar
  7. Ballner D, Herzele S, Keckes J, Edler M, Griesser T, Saake B, Liebner F, Potthast A, Paulik C, Gindl-Altmutter W (2016) Lignocellulose nanofiber-reinforced polystyrene produced from composite microspheres obtained in suspension polymerization shows superior mechanical performance. ACS Appl Mater Interfaces 8:13520–13525CrossRefPubMedGoogle Scholar
  8. Bayer E, Chanzy H, Lamed R, Shoham Y (1998) Cellulose, cellulases and cellulosomes. Curr Opin Struct Biol 8:548–557CrossRefPubMedGoogle Scholar
  9. Brett CT (2000) Cellulose microfibrils in plants: biosynthesis, deposition, and integration into the cell wall. Int Rev Cytol 199:161–199CrossRefPubMedGoogle Scholar
  10. Cerclier CV, Guyomard-Lack A, Cousin F, Jean B, Bonnin E, Cathala B, Moreau C (2013) Xyloglucan–cellulose nanocrystal multilayered films:effect of film architecture on enzymatic hydrolysis. Biomacromol 14:3599–3609CrossRefGoogle Scholar
  11. Cherian BM, Leao AL, de Souza SF, Thomas S, Pothan LA, Kottaisamy M (2010) Isolation of nanocellulose from pineapple leaf fibres by steam explosion. Carbohydr Polym 81:720–725CrossRefGoogle Scholar
  12. Eronen P, Österberg M, Heikkinen S, Tenkanen M, Laine J (2011) Interactions of structurally different hemicelluloses with nanofibrillar cellulose. Carbohydr Polym 86:1281–1290CrossRefGoogle Scholar
  13. Fengel D, Grosser D (1975) Chemical composition of softwoods and hardwoods—a bibliographical review. Holz Roh Werkst 33:32–34CrossRefGoogle Scholar
  14. Fujii T, Fang X, Inoue H, Murakami K, Sawayama S (2009) Enzymatic hydrolyzing performance of Acremonium cellulolyticus and Trichoderma reesei against three lignocellulosic materials. Biotechnol Biofuels 2:24CrossRefPubMedPubMedCentralGoogle Scholar
  15. Fujii T, Hoshino T, Inoue H, Yano S (2014) Taxonomic revision of the cellulose-degrading fungus Acremonium cellulolyticus nomen nudum to Talaromyces based on phylogenetic analysis. FEMS Microbiol Lett 351:32–41CrossRefPubMedGoogle Scholar
  16. Hoeger IC, Filpponen I, Martin-Sampedro R, Johansson LS, Österberg M, Laine J, Kelley S, Rojas OJ (2012) Bicomponent lignocellulose thin films to study the role of surface lignin in cellulolytic reactions. Biomacromol 13:3228–3240CrossRefGoogle Scholar
  17. Inoue H, Kishishita S, Kumagai A, Kataoka M, Fujii T, Ishikawa K (2015) Contribution of a family 1 carbohydrate-binding module in thermostable glycoside hydrolase 10 xylanase from Talaromyces cellulolyticus toward synergistic enzymatic hydrolysis of lignocellulose. Biotechnol Biofuels 8:77CrossRefPubMedPubMedCentralGoogle Scholar
  18. Iwamoto S, Abe K, Yano H (2008) The effect of hemicelluloses on wood pulp nanofibrillation and nanofiber network characteristics. Biomacromol 9:1022–1026CrossRefGoogle Scholar
  19. Iwamoto S, Yamamoto S, Lee SH, Endo T (2014) Solid-state shear pulverization as effective treatment for dispersing lignocellulose nanofibers in polypropylene composites. Cellulose 21:1573–1580CrossRefGoogle Scholar
  20. Josefsson P, Henriksson G, Wågberg L (2008) The physical action of cellulases revealed by a quartz crystal microbalance study using ultrathin cellulose films and pure cellulases. Biomacromol 9:249–254CrossRefGoogle Scholar
  21. Kerr AJ, Goring DAI (1975) The ultrastructural arrangement of the wood cell wall. Cellul Chem Technol 9:563–573Google Scholar
  22. Kumagai A, Lee S-H, Endo T (2013) Thin film of lignocellulosic nanofibrils with different chemical composition for QCM-D study. Biomacromol 14:2420–2426CrossRefGoogle Scholar
  23. Kumagai A, Iwamoto S, Lee S-H, Endo T (2014) Quartz crystal microbalance with dissipation monitoring of the enzymatic hydrolysis of steam-treated lignocellulosic nanofibrils. Cellulose 21:2433–2444CrossRefGoogle Scholar
  24. Kumagai A, Iwamoto S, Lee S-H, Endo T (2016) Evaluation of the effect of hot-compressed water treatment on enzymatic hydrolysis of lignocellulosic nanofibrils with different lignin content using a quartz crystal microbalance. Biotech Bioengin 113:1441–1447CrossRefGoogle Scholar
  25. Lavoine N, Givord C, Tabary N, Desloges I, Martel B, Bras J (2014) Elaboration of a new antibacterial bio-nano-material for food-packaging by synergistic action of cyclodextrin and microfibrillated cellulose. Innov Food Sci Emerg Technol 26:330–340CrossRefGoogle Scholar
  26. Maeda Y, Awano T, Takabe K, Fujita M (2000) Immunolocalization of glucomannan in the cell wall of differentiating tracheids in Chamaecyparis obtusa. Protoplasma 213:148–156CrossRefGoogle Scholar
  27. Martin-Sampedro R, Rahikainen LR, Johansson LS, Marjamaa K, Laine J, Kruus K, Rojas OJ (2013) Preferential adsorption and activity of monocomponent cellulases on lignocellulose thin films with varying lignin content. Biomacromol 14:1231–1239CrossRefGoogle Scholar
  28. Marx KA (2003) Quartz crystal microbalance: a useful tool for studying thin polymer films and complex biomolecular systems at the solution–surface interface. Biomacromol 4:1099–1120CrossRefGoogle Scholar
  29. Nihira T, Mori T, Asakura M, Okahata Y (2011) Kinetic studies of dextransucrase enzyme reactions on a substrate- or enzyme-immobilized 27 MHz quartz crystal microbalance. Langmuir 27:2107–2111CrossRefPubMedGoogle Scholar
  30. Nogi M, Yano H (2008) Transparent nanocomposites based on cellulose produced by bacteria offer potential innovation in the electronics device industry. Adv Mater 20:1849–1852CrossRefGoogle Scholar
  31. Notley SM, Norgren M (2010) Surface energy and wettability of spin-coated thin films of lignin isolated from wood. Langmuir 26:5484–5490CrossRefPubMedGoogle Scholar
  32. Ruel K, Barnoud F, Goring DAI (1978) Lamellation in the S2 layer of softwood tracheids as demonstrated by scanning transmission electron microscopy. Wood Sci Technol 12:287–291CrossRefGoogle Scholar
  33. Salmén L, Olsson AM (1998) Interaction between hemicelluloses, lignin and cellulose: structure-property relationships. J Pulp Pap Sci 24:99–103Google Scholar
  34. Sarkar P, Bosneaga E, Auer M (2009) Plant cell walls throughout evolution: towards a molecular understanding of their design principles. J Exp Bot 60:3615–3635CrossRefPubMedGoogle Scholar
  35. Scheller HV, Ulvskov P (2010) Hemicelluloses. Annu Rev Plant Biol 61:263–289CrossRefPubMedGoogle Scholar
  36. Schwind M, Hosseinpour S, Johnson CM, Langhammer C, Zorić I, Leygraf C, Kasemo B (2013) Combined in situ quartz crystal microbalance with dissipation monitoring, indirect nanoplasmonic sensing, and vibrational sum frequency spectroscopic monitoring of alkanethiol-protected copper corrosion. Langmuir 29:7151–7161CrossRefPubMedGoogle Scholar
  37. Sellborn A, Andersson M, Fant C, Gretzer C, Elwing H (2003) Methods for research on immune complement activation on modified sensor surfaces. Coll Surf B 27:295–301CrossRefGoogle Scholar
  38. Shallom D, Shoham Y (2003) Microbial hemicellulases. Curr Opin Microbiol 6:219–228CrossRefPubMedGoogle Scholar
  39. Siró I, Plackett D (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17:459–494CrossRefGoogle Scholar
  40. Sluiter A, Hames B, Ruiz R, Scarlata C, Sluiter J, Templeton D, Crocker D (2011) Determination of structural carbohydrates and lignin in biomass, laboratory analytical procedure (LAP), Version 07-08-2011. National Renewable Laboratory, NREL/TP-510-42618Google Scholar
  41. Spence KL, Venditti RA, Habibi Y, Rojas OJ, Pawlak JJ (2010) The effect of chemical composition on microfibrillar cellulose films from wood pulps: mechanical processing and physical properties. Bioresour Technol 101:5961–5968CrossRefPubMedGoogle Scholar
  42. Terashima N, Kitano K, Kojima M, Yoshida M, Yamamoto H, Westermark UJ (2009) Nanostructural assembly of cellulose, hemicellulose, and lignin in the middle layer of secondary wall of ginkgo tracheid. Wood Sci 55:409–416CrossRefGoogle Scholar
  43. Thielemans W, Warbey CR, Walsh DA (2009) Permselective nanostructured membranes based on cellulose nanowhiskers. Green Chem 11:531–537CrossRefGoogle Scholar
  44. Tokoh C, Takabe K, Fujita M, Saiki H (1998) Cellulose synthesized by Acetobacter xylinum in the presence of acetyl glucomannan. Cellulose 5:249–261CrossRefGoogle Scholar
  45. Tokoh C, Takabe K, Sugiyama J, Fujita M (2002a) Cellulose synthesized by Acetobacter xylinum in the presence of plant cell wall polysaccharides. Cellulose 9:65–74CrossRefGoogle Scholar
  46. Tokoh C, Takabe K, Sugiyama J, Fujita M (2002b) CP/MAS 13C NMR and electron diffraction study of bacterial cellulose structure affected by cell wall polysaccharides. Cellulose 9:351–360CrossRefGoogle Scholar
  47. Willats WGT, Steele-King CG, McCartney L, Orfila C, Marcus SE, Knox JP (2000) Making and using antibody probes to study plant cell walls. Plant Physiol Biochem 38:27–36CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media B.V., part of Springer Nature 2018

Authors and Affiliations

  1. 1.Research Institute for Sustainable Chemistry, Department of Materials and ChemistryNational Institute of Advanced Industrial Science and Technology (AIST)HiroshimaJapan

Personalised recommendations