Photoinduced synthesis of gold nanoparticle–bacterial cellulose nanocomposite and its application for in-situ detection of trace concentration of dyes in textile and paper
- 189 Downloads
Nanocomposites consisting of bacterial cellulose (BC) and gold nanoparticles (AuNPs) were successfully fabricated using a facile one-step photoinduction method. Well-dispersed AuNPs were in-situ synthesized on the network of BC hydrogels in the presence of tetrachloroauric (III) acid solution under a xenon light source. BCs were treated with different concentrations of gold ions. The optical features and morphologies of the treated BCs were investigated by ultraviolet–visible absorption spectroscopy and scanning electron microscope. X-ray diffraction and X-ray photoelectron spectroscopy were also employed to characterize the AuNP–BC nanocomposites. The experimental results demonstrate that AuNPs are uniformly dispersed and well-bound to the BC matrix, and the three dimensional porous structure of BC is sustained. The acid condition facilitates the synthesis of AuNPs by using BC in aqueous solution. The AuNP–BC hydrogels were then dried into a transparent nanopaper and used as the surface enhanced Raman scattering (SERS) substrate. The lowest detectable concentration for Rhodamine 6G could be achieved at 0.1 nM. Furthermore, by stamping the nanopaper on a yarn or paper, we established an SERS platform for in-situ detection of trace concentration of dyes on the yarn or paper, enabling its application in forensic investigation and art conservation application areas.
KeywordsGold nanoparticle Bacterial cellulose Dye Photoinduction SERS
This research was supported by the National Natural Science Foundation of China (NSFC 51403162 and 51273153), the Educational Commission of Hubei Province of China (No. T201101). We would also like to acknowledge the research support from the MoE Innovation Team Project in Biological Fibers Advanced Textile Processing and Clean Production (No. IRT13086), Open Project of National Engineering Laboratory for Advanced Textile Processing and Clean Production (Wuhan Textile University) (GCSYS201702) and Open Project of Key Laboratory for the Synthesis and Application of Organic Functional Molecules, Ministry of Education (Hubei University) (No. KLSAOFM1712).
- Foresti ML, Vazquez A, Boury B (2017) Applications of bacterial cellulose as precursor of carbon and composites with metal oxide, metal sulfide and metal nanoparticles: a review of recent advances. Carbohydr Polym 157:447–467. https://doi.org/10.1016/j.carbpol.2016.09.008 CrossRefPubMedGoogle Scholar
- Vasconcelos NF, Feitosa JP, da Gama FM, Morais JP, Andrade FK, de Souza Filho MS, Rosa MF (2017) Bacterial cellulose nanocrystals produced under different hydrolysis conditions: properties and morphological features. Carbohydr Polym 155:425–431. https://doi.org/10.1016/j.carbpol.2016.08.090 CrossRefPubMedGoogle Scholar
- Wang W, Zhang TJ, Zhang DW, Li HY, Ma YR, Qi LM, Zhou YL, Zhang XX (2011) Amperometric hydrogen peroxide biosensor based on the immobilization of heme proteins on gold nanoparticles-bacteria cellulose nanofibers nanocomposite. Talanta 84:71–77. https://doi.org/10.1016/j.talanta.2010.12.015 CrossRefPubMedGoogle Scholar
- Wang Y, Yadav S, Heinlein T, Konjik V, Breitzke H, Buntkowsky G, Schneider JJ, Zhang K (2014) Ultra-light nanocomposite aerogels of bacterial cellulose and reduced graphene oxide for specific absorption and separation of organic liquids. RSC Adv 4:21553. https://doi.org/10.1039/c4ra02168a CrossRefGoogle Scholar