Abstract
The present article is addressed to investigating the effect of different fabric grammages (mass per area unit) on cotton combustion. To this aim, 100, 200 and 400 g/m2 cotton fabrics were tested when exposed to (1) two different heat fluxes (25 and 35 kW/m2) under a cone calorimeter, (2) a methane flame in horizontal or vertical flame spread tests or (3) a propane flame in Limiting Oxygen Index tests, and (4) when pyrolysed and further oxidised in pyrolysis-combustion flow calorimetry (PCFC). The collected results demonstrated a precise relationship between fabric grammage and cotton combustion behaviour. Indeed, when exposed to a 35-kW/m2 heat flux, the higher the fabric grammage, the higher the total heat release during combustion was; the opposite trend was observed when the same fabrics were pyrolysed and further oxidised in PCFC. This finding was ascribed to the different scenarios described by these instrumentations; indeed, the cone calorimeter was able to reproduce cotton combustion in a well-ventilated context in the presence of air (thus, oxygen), while PCFC only represented the combustion of pyrolysis products. However, both techniques indirectly evidenced a linear dependence of char formation as a function of fabric grammage: the higher the fabric grammage, the larger the amount of char formed was. The same trend was also observed during horizontal and vertical flame spread tests. In conclusion, the present article is intended to show how cotton combustion may be affected by fabric grammage as well as how such behaviour is influenced by the experimental conditions in which it is investigated.
Similar content being viewed by others
References
Alongi J, Malucelli G (2015) Cotton flame retardancy: state of the art and future perspectives. RSC Adv 5:24239–24263. doi:10.1039/C5RA01176K
Alongi J, Camino G, Malucelli G (2013a) Heating rate effect on char yield from cotton, poly(ethylene terephthalate) and blend fabrics. Carbohydr Polym 92:1327–1334. doi:10.1016/j.carbpol.2012.10.029
Alongi J, Carosio F, Horrocks AR, Malucelli G (2013b) Update on flame retardant textiles: state of the art, environmental issues and innovative solutions. Smithers RAPRA Publishing, Shawbury
Alongi J, Carosio F, Malucelli G (2014a) Current emerging techniques to impart flame retardancy to fabrics. Polym Degrad Stab 106:138–149. doi:10.1016/j.polymdegradstab.2013.07.012
Alongi J, Milnes J, Malucelli G, Bourbigot S, Kandola B (2014b) Thermal degradation of DNA-treated cotton fabrics under different heating conditions. J Anal Appl Pyrolysis 108:212–221. doi:10.1016/j.jaap.2014.04.014
ASTM D2863 (2006) Standard test method for measuring the minimum oxygen concentration to support candle-like combustion of plastics (oxygen index). American Society for Testing and Materials International, West Conshohocken (Pennsylvania)
ASTM D7309 (2013) Standard test method for determining flammability characteristics of plastics and other solid materials using microscale combustion calorimetry. American Society for Testing and Materials International, West Conshohocken (Pennsylvania)
Basak S (2015) Fire retardant cellulosic textile using banana pseudostem sap. Pol J Chem Technol 17:123–133
Basak S, Samanta KK, Chattopadhyaya SK (2014) Fire retardant property of the cotton fabric treated with herbal extract. J Text Inst. doi:10.1080/00405000.2014.995456
Basak S, Samanta KK, Chattopadhyay SK, Narkar R (2015a) Thermally stable cellulosic paper made using banana pseudostem sap, a wasted by-product. Cellulose. doi:10.1007/s10570-015-0662-7
Basak S, Samanta KK, Chattopadhyay SK, Narkar R (2015b) Self-extinguishable ligno-cellulosic fabric using banana pseudostem sap. Curr Sci 108:372–383
Bourbigot S, Chlebicki S, Mamleev V (2002) Thermal degradation of cotton under linear heating. Polym Degrad Stab 78:57–62. doi:10.1016/S01413910(02)00119-2
Ceylan O, Alongi J, Van Landuyt L, Frache A, De Clerck K (2013) Combustion characteristics of cellulosic loose fibres. Fire Mater 37:482–490. doi:10.1002/fam.2147
Faroq AA, Price D, Milnes GJ, Horrocks AR (1991) Use of gas chromatographic analysis of volatile products to investigate the mechanisms underlying the influence of flame retardants on the pyrolysis of cellulose in air. Polym Degrad Stab 33:155–170. doi:10.1016/0141-3910(91)90015-J
Gordon S, Hsie YL (2007) Cotton: science and technology. Woodhead Publishing Limited and CRC Press, Boca Raton (FL)
Horrocks AR (1983) An introduction to the burning behaviour of cellulosic fibres. J Soc Dyes Colour 99:191–197. doi:10.1111/j.1478-4408.1983.tb03686.x
Horrocks RA (1996) Developments in flame retardants for heat and fire resistant textiles—the role of char and intumescence. Polym Degrad Stab 54:143–154. doi:10.1016/S0141-3910(96)00038-9
Horrocks AR (2011) Flame retardant challenges for textiles and fibres: new chemistry versus innovatory solutions. Polym Degrad Stab 96:377–392. doi:10.1016/j.polymdegradstab.2010.03.036
ISO 13943 (2007) Fire safety—vocabulary. International Organization for Standardization, Geneva
ISO 3572 (1976) Textiles—weaves—definition of general terms and basic weaves. International Organization for Standardization, Geneva
ISO 5660 (2002) Fire test, reaction to fire, rate of heat release (cone calorimeter method). International Organization for Standardization, Geneva
Kandola BK, Horrocks AR (1999) Complex char formation in flame-retarded fiber/intumescent combinations: physical and chemical nature of char1. Text Res J 69:374–381. doi:10.1177/004051759906900512
Kandola BJ, Horrocks RA, Price D, Coleman GV (1996) Flame retardant treatments of cellulose and their influence on the mechanism of cellulose pyrolysis. J Macromol Sci—Rev Macromol Chem Phys C36:721–794. doi:10.1080/15321799608014859
Lowden LA, Hull TR (2013) Flammability behaviour of wood and a review of the methods for its reduction. Fire Sci Rev 2:4. doi:10.1186/2193-0414-2-4
Lyon RE, Walters RN (2004) Pyrolysis combustion flow calorimetry. J Anal Appl Pyrolysis 71:27–46. doi:10.1016/S0165-2370(03)00096-2
Lyon RE, Takemori MT, Safronava N, Stoliarov SI, Walters RN (2009) A molecular basis for polymer flammability. Polymer 50:2608–2617. doi:10.1016/j.polymer.2009.03.047
Malucelli G, Bosco F, Alongi J, Carosio F, Di Blasio A, Mollea C, Cuttica F, Casale A (2014) Biomacromolecules as novel green flame retardant systems for textiles: an overview. RSC Adv 4:46024–46039. doi:10.1039/C4RA06771A
Mamleev V, Bourbigot S, Le Bras M, Yvon J (2009) The facts and hypotheses relating to the phenomenological model of cellulose pyrolysis: interdependence of the steps. J Anal Appl Pyrolysis 84:1–17. doi:10.1016/j.jaap.2008.10.014
Morterra C, Low MJD (1983) IR studies of carbons-II. Carbon 21:283–288. doi:10.1016/0008-6223(83)90092-1
Morterra C, Low MJD (1984) An infrared spectroscopic approach to the characterization of intermediate chars. Mater Lett 2:289–293. doi:10.1016/0167-577X(84)90134-4
Morterra C, Low MJD (1985) An infrared spectroscopic study of some carbonaceous materials. Mater Chem Phys 12:207–233. doi:10.1016/0254-0584(85)90094-X
Price D, Horrocks RA, Akalin M, Faroq AA (1997) Influence of flame retardants on the mechanism of pyrolysis of cotton (cellulose) fabrics in air. J Anal Appl Pyrolysis 40–41:511–524. doi:10.1016/S0165-2370(97)00043-0
Schartel B, Hull TR (2007) Development of fire-retarded materials-interpretation of cone calorimeter data. Fire Mater 31:327–354. doi:10.1002/fam.949
Sekiguchi Y, Frye JS, Shafizadeh F (1983) Structure and formation of cellulosic chars. J Appl Polym Sci 28:3513–3525. doi:10.1002/app.1983.070281116
Shafizadeh F, Fu YL (1973) Pyrolysis of cellulose. Carbohydr Res 29:113–122. doi:10.1016/S0008-6215(00)82074-1
Shafizadeh F, Sekiguchi Y (1983) Development of aromaticity in cellulosic chars. Carbon 21:511–516. doi:10.1016/0008-6223(83)90144-6
Shafizadeh F, Sekiguchi Y (1984) Oxidation of chars during smoldering combustion of cellulosic materials. Combust Flame 55:171–179. doi:10.1016/0010-2180(84)90025-7
Tata J, Alongi J, Carosio F, Frache A (2011) Optimization of the procedure to burn textile fabrics by cone calorimeter: part I. Combustion behavior of polyester, Fire Mater 35:397–409. doi:10.1002/fam.1061
UNI EN 1049 (1996) Woven fabrics—construction—methods of analysis. Ente Nazionale Italiano di Unificazione, Milano (Italy)
Wakelyn PJ, Bertoniere NR, French AD, Thibodeaux DP, Triplett BA, Rousselle MA, Goynes WR, Edwards JV, Hunter L, McAlister DD, Gamble GR (2006) Cotton fiber chemistry and technology. CRC Press, Boca Raton (FL)
Weil E, Hirschler M, Patel N, Said M, Shakir S (1992) Oxygen index: correlations to other fire tests. Fire Mater 16:159–167. doi:10.1002/fam.810160402
Yang CQ, Hu Y (2011) Applications of micro-scale combustion calorimetry to the studies of cotton and nylon fabrics treated with organophosphorus flame retardants. J Anal Appl Pyrolysis 91:125–133. doi:10.1016/j.jaap.2011.01.012
Yang CQ, Hu Y (2012) Textile heat release properties measured by microscale combustion calorimetry: experimental repeatability. Fire Mater 36:127–137. doi:10.1002/fam.1093
Yang CQ, He Q, Lyon RE, Hu Y (2010) Investigation of the flammability of different textile fabrics using micro-scale combustion calorimetry. Polym Degrad Stab 95:108–115. doi:10.1016/j.polymdegradstab.2009.11.047
Acknowledgments
The authors thank the European COST Action FLARETEX (MP1105) “Sustainable flame retardancy for textiles and related materials based on nanoparticles substituting conventional chemicals”. In addition, the authors want to thank Mr. Andrea Messina and Mr. Alessandro Di Blasio for the PCFC tests and SEM observations, respectively. In addition, we thank Dr. Gabriella Fusi and Centro Tessile e Cotoniero (Busto Arsizio, Italy) for the measurements regarding the fabric weave.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Alongi, J., Cuttica, F., Carosio, F. et al. How much the fabric grammage may affect cotton combustion?. Cellulose 22, 3477–3489 (2015). https://doi.org/10.1007/s10570-015-0717-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-015-0717-9