Skip to main content

Advertisement

SpringerLink
Log in

Bacterial cellulose films with controlled microstructure–mechanical property relationships

  • Published:
Cellulose Aims and scope Submit manuscript

Abstract

Bacterial cellulose (BC) films with different porosities have been developed in order to obtain improved mechanical properties. After 13 days of incubation of Gluconobacter xylinum bacteria in static culture, BC pellicles have been set. BC films have been compression molded after water dispersion of BC pellicles and filtration by applying different pressures (10, 50, and 100 MPa) to obtain films with different porosities. Tensile behavior has been analyzed in order to discuss the microstructure–property relationships. Compression pressure has been found as an important parameter to control the final mechanical properties of BC films where slightly enhanced tensile strength and deformation at break are obtained increasing mold compression pressure, while modulus also increases following a nearly linear dependence upon film porosity. This behavior is related to the higher densification by increasing mold compression pressure that reduces the interfibrillar space, thus increasing the possibility of interfibrillar bonding zones. Network theories have been applied to relate film elastic properties with individual nanofiber properties.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  • Alemdar A, Sain M (2008) Biocomposites from wheat straw nanofibres: morphology, thermal and mechanical properties. Comp Sci Technol 68:557–565

    Article  CAS  Google Scholar 

  • Borosysiak S, Garbarczyk J (2003) Applying the WAXS method to estimate the supermolecular structure of cellulose fibres after mercerisation. Fibres & Text 11:104–106

    Google Scholar 

  • Cox HL (1952) The elasticity and strength of paper and other fibrous materials. Brit J Appl Phys 3:72–79

    Article  Google Scholar 

  • Eichhorn SJ, Young RJ (2001) The Young’s modulus of a microcrystalline cellulose. Cellulose 8:197–207

    Article  CAS  Google Scholar 

  • Eichhorn SJ, Sirichaisit J, Young RJ (2001) Deformation mechanisms in cellulose fibres, paper and wood. J Mater Sci 36:3129–3135

    Article  CAS  Google Scholar 

  • Ganster J, Fink H-P, Fraatz J, Nywlt M (1994) Relation between structure and elastic constants of man-made cellulosic fibres: I. A two phase anisotropioc model with contiguity parameter. Acta Polymer 45:312–318

    Article  CAS  Google Scholar 

  • Gindl W, Keckes J (2004) Tensile properties of cellulose acetate butyrate composites reinforced with bacterial cellulose. Comp Sci Technol 64:2407–2413

    Article  CAS  Google Scholar 

  • Gushados G, Wan W, Hutter JL (2005) Measurement of the elastic modulus of single bacterial cellulose fibers using atomic force microscopy. Langmuir 21:6642–6646

    Article  Google Scholar 

  • Henriksson M, Berglund LA, Isaksson P, Lindström T, Nishino T (2008) Cellulose nanopaper structures of high toughness. Biomacromolecules 9:1579–1585

    Article  CAS  Google Scholar 

  • Hsieh YC, Yano H, Nogi M, Eichhorn S (2008) An estimation of the Young’s modulus of bacterial cellulose filaments. Cellulose 15:507–513

    Article  CAS  Google Scholar 

  • Iwamoto, Nakagaito AN, Yano H (2007) Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites. Appli Phys A 89:461–466

    Article  CAS  Google Scholar 

  • Jin H, Zha C, Gu L (2007) Direct dissolution of cellulose in NaOH/thiourea/urea aqueous solution. Carbohydr Res 342:851–858

    Article  CAS  Google Scholar 

  • Johansson B, Alderborn G (2001) The effect of shape and porosity on the compression behaviour and tablet forming ability of granular materials formed from microcrystalline cellulose. Eur J Pharm Biopharm 52:347–357

    Article  CAS  Google Scholar 

  • Johansson B, Nicklasson F, Alderborn G (1998) Effect of pellet size on degree of deformation and densification during compresion and on compatibility of microcrystalline cellulose pellets. Int J Pharm 52:347–357

    Google Scholar 

  • Klemm D, Heublein B, Fink HP, Bohn A (2005) Cellulose: fascinating biopolymer and sustainable raw material. Angew Chem Int Ed 44:3358–3393

    Article  CAS  Google Scholar 

  • Krenchel H (1964) Fibre reinforcement. Akademisk Forlag, Copenhagen

  • Kumar V, Kothari SH (1999) Effect of compressional force on the crystallinity of directly compressible cellulose excipients. Int J Pharm 177:173–182

    Article  CAS  Google Scholar 

  • Marx-Figini M (1987) Evaluation of the accessibility of celluloses by intrinsic viscosity ratio. Polym Bull 17:225–229

    Article  CAS  Google Scholar 

  • McCullough RL, Wu CT, Seferis JC, Lindenmeyer PH (1976) Predictions of limiting mechanical performance for anisotropic crystalline polymers. Polym Eng Sci 16:371–387

    Article  CAS  Google Scholar 

  • Mwaikambo LY, Ansell MP (2001) The determination of porosity and cellulose content of plant fibres by density method. J Mater Sci Lett 20:2095–2096

    Article  CAS  Google Scholar 

  • Nakagaito AN, Yano H (2004) The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites. Appl Phys A: Mater Sci Process 78:547–552

    Article  CAS  Google Scholar 

  • Nakagaito AN, Iwamoto S, Yano H (2005) Bacterial cellulose: the ultimate nano-scalar cellulose morphology for the production of high-strength composites. Appl Phys A: Mater Sci Process 80:93–97

    Article  CAS  Google Scholar 

  • Nishi Y, Uryu M, Yamanaka S, Watanabe K, Kitamura N, Iguchi M, Mitsuhashi S (1990) The structure and mechanical properties of sheets prepared from bacterial cellulose. J Mater Sci 25:2997–3001

    Article  CAS  Google Scholar 

  • Putra A, Kakugo A, Furukawa H, Gong JP, Osada Y (2008) Tubular bacterial cellulose gel with oriented fibrils on the curved surface. Polymer 49:1885–1891

    Article  CAS  Google Scholar 

  • Segal L, Creely J, Martin A, Conrad C (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794

    Article  CAS  Google Scholar 

  • Watanabe K, Tabuchi M, Morinaga Y, Yoshinaga F (1998) Structural features and properties of bacterial cellulose produced in agitated culture. Cellulose 5:187–200

    Article  CAS  Google Scholar 

  • Yamanaka S, Ishihara M, Sugiyama J (2000) Structural modification of bacterial cellulose. Cellulose 7:213–225

    Article  CAS  Google Scholar 

  • Yan Z, Chen S, Wang H, Wang B, Wang C, Jiang J (2008) Cellulose synthesized by Acetobacter xylinum in the presence of multi-walled carbon nanotubes. Carbohydr Res 343:73–80

    Article  CAS  Google Scholar 

  • Zuluaga R, Putaux JL, Cruz J, Vélez J, Mondragon I, Gañan P (2009) Cellulose microfibrils from banana rachis: effect of alkaline treatments on structural and morphological features. Carbohydr Polym 76:51–59

    Article  CAS  Google Scholar 

Download references

Acknowledgments

The authors gratefully acknowledge Eusko Jaurlaritza, Grupo Consolidado IT-365-07 and ETORTEK-inanoGUNE for financial assistance to carry out this investigation.

Author information

Authors and Affiliations

  1. Materials + Technologies Group, Polytechnic School, Dpto. Ingeniería Química y M. Ambiente, Universidad País Vasco/Euskal Herriko Unibertsitatea, Pza. Europa 1, 20018, Donostia-San Sebastián, Spain

    A. Retegi, N. Gabilondo, C. Peña, K. de la Caba & I. Mondragon

  2. New Materials Group, Universidad Pontificia Bolivariana Circular 1 # 70-01, Medellin, Colombia

    R. Zuluaga, C. Castro & P. Gañan

Authors
  1. A. Retegi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. N. Gabilondo
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. C. Peña
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. R. Zuluaga
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. C. Castro
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. P. Gañan
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. K. de la Caba
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. I. Mondragon
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to I. Mondragon.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Retegi, A., Gabilondo, N., Peña, C. et al. Bacterial cellulose films with controlled microstructure–mechanical property relationships. Cellulose 17, 661–669 (2010). https://doi.org/10.1007/s10570-009-9389-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10570-009-9389-7

Keywords

Search

Navigation