Abstract
The porous biomass carbons (PBCs) as catalyst supports were synthesized by simple hydrothermal and carbonization method, and the surface property of PBCs were designed by plasma treatment technology. The Pd and Ce loaded TPBCs (PBCs were treated with plasma) supports were evaluated for their catalytic activity in the CO oxidation reaction. The Pd–Ce/TPBCs-20 catalyst (Conditions: CO concentration: 1 vol%, Total flow rate: 50 mL min−1, Moisture: 4 vol%) exhibited the highest catalytic activity, and the complete conversion temperature (T100) was about 20 °C for CO catalytic oxidation. Moreover, the Pd–Ce/TPBCs-20 catalyst behaved an excellent stability with the CO conversion rate in the presence of moisture, remaining higher than 90% after 24 h on stream at 20 °C. Raman, XPS, H2-TPR and O2-TPD analysis revealed that the surface oxygen-containing functional groups and defect concentration will increase with increasing plasma treatment time, which could improved Pd and Ce diffusion and Pd–O–Ce bonding interactions, resulting in increased CO catalytic activity. In addition, chitosan as the raw material for the synthesis of PBCs support, is low-cost and easy to be obtained from nature. Therefore, the Pd–Ce/TPBCs catalysts have great potential for catalytic removal of CO in practical application.
Similar content being viewed by others
References
Zhang XD, Yang Y, Song L, Wang YX, He C, Wang Z, Cui LF (2018) High and stable catalytic activity of Ag/Fe2O3 catalysts derived from MOFs for CO oxidation. Mol Catal 447:80–89
Yang YQ, Dong H, Wang Y, Wang YX, Liu N, Wang DJ, Zhang XD (2017) A facile synthesis for porous CuO/Cu2O composites derived from MOFs and their superior catalytic performance for CO oxidation. Inorg Chem Commun 86:74–77
Zhang XD, Hou FL, Li HX, Yang Y, Wang YX, Liu N, Yang YQ (2018) A strawsheave-like metal organic framework Ce-BTC derivative containing high specific surface area for improving the catalytic activity of CO oxidation reaction. Microporous Mesoporous Mater 259:211–219
Cui LF, Zhao D, Yang Y, Wang YX, Zhang XD (2017) Synthesis of highly efficient α-Fe2O3 catalysts for CO oxidation derived from MIL-100(Fe). J Solid State Chem 247:168–172
Zhang XD, Li HX, Lu XT, Xu JC, Wang YX, He C, Liu N, Yang YQ, Wang Y (2018) Facile synthesis of highly efficient amorphous Mn-MIL-100 catalysts: formation mechanism and structure changes during application in CO oxidation. Chem-Eur J 24:8822–8832
Zhang XD, Hou FL, Yang Y, Wang YX, Liu N, Chen D, Yang YQ (2017) A facile synthesis for cauliflower like CeO2 catalysts from Ce-BTC precursor and their catalytic performance for CO oxidation. Appl Surf Sci 423:771–779
Wang L, Yin GY, Yang YQ, Zhang XD (2019) Enhanced CO oxidation and toluene oxidation on CuCeZr catalysts derived from UiO-66 metal organic frameworks. React Kinet Mech Catal 128:193–204
Yan Z, Xu Z, Yue L, Shi L, Huang L (2018) Hierarchical Ni-Al hydrotalcite supported Pt catalyst for efficient catalytic oxidation of formaldehyde at room temperature. Chin J Catal 39:1919–1928
Donoeva B, Masoud N, Jongh PE (2017) Carbon support surface effects in the gold-catalyzed oxidation of 5-hydroxymethylfurfural. ACS Catal 7:4581–4591
Hussain A (2013) Beneficial effect of Cu on a Cu-modified Au catalytic surface for CO oxidation reaction: a DFT study. J Phys Chem C 117:5084–5094
Frank A, Rinaldi A, Blume R, Schlögl R, Su D (2010) Oxidation stability of multiwalled carbon nanotubes for catalytic applications. Chem Mater 22:4462–4470
Chen G, Xu Q, Yang Y, Li C, Huang T, Sun G, Zhang S, Ma D, Li X (2015) Facile and mild strategy to construct mesoporous CeO2−CuO nanorods with enhanced catalytic activity toward CO oxidation. ACS Appl Mater Interfaces 7:23538–23544
Xie Q, Zhao Y, Guo H, Lu A, Zhang X, Wang L, Chen M, Peng D (2014) Facile preparation of well-dispersed CeO2–ZnO composite hollow microspheres with enhanced catalytic activity for CO oxidation. ACS Appl Mater Interfaces 6:421–428
Su Y, Dai L, Zhang Q, Li Y, Peng J, Wu RA, Han W, Tang Z, Wang Y (2016) Fabrication of Cu-doped CeO2 catalysts with different dimension pore structures for CO catalytic oxidation. Catal Surf Asia 20:231–240
Guo H, He Y, Wang Y, Liu L, Yang X, Wang S, Huang Z, Wei Q (2013) Morphology-controlled synthesis of Cage-Bell Pd@CeO2 structured nanoparticle aggregates as catalysts for the low-temperature oxidation of CO. J Mater Chem A 1:7494–7499
Rao R, Yang M, Li C, Dong H, Fang S, Zhang A (2015) A facile synthesis for hierarchical porous CeO2 nanobundles and their superior catalytic performance for CO oxidation. J Mater Chem A 3:782–788
Wang X, Liu D, Song S, Zhang H (2013) Pt@CeO2 Multicore@Shell self-assembled nanospheres: clean synthesis, structure optimization, and catalytic applications. J Am Chem Soc 135:15864–15872
Su Y, Yuan S, Ning D, Zhang Q, Han W, Wang Y (2018) The template-free synthesis of CuO@CeO2 nanospheres: facile strategy, structure optimization, and enhanced catalytic activity toward CO oxidation. Eur J Inorg Chem 25:2927–2934
Wang Y, Arandiyan H, Scott J, Bagheri A, Dai H, Amal R (2017) Recent advances in ordered meso/macroporous metal oxides for heterogeneous catalysis: a review. J Mater Chem A 5:8825–8846
Su Y, Tang Z, Han W, Song Y, Lu G (2015) Effect of different pore structures on the surface textures of the Cu-doped CeO2 catalysts and applied for CO catalytic oxidation. Catal Surf Asia 19:129–139
Han W, Huang X, Lu G, Tang Z (2018) Carefully designed oxygen-containing functional groups and defects of porous carbon spheres with UV-O3 treatment and their enhanced catalytic performance. Appl Surf Sci 436:747–755
Su Y, Tang Z, Han W, Song Y, Lu G (2015) Enhanced catalytic performance of three-dimensional ordered mesoporous transition metal (Co, Cu, Fe)-doped CeO2 catalysts for CO catalytic oxidation. Catal Surv Asia 19:68–77
Widmann D, Behm RJ (2014) Activation of molecular oxygen and the nature of the active oxygen species for CO oxidation on oxide supported Au catalysts. Acc Chem Res 47:740–749
Meng Q, Wang W, Weng X, Liu Y, Wang H, Wu Z (2016) Active oxygen species in Lan+1NinO3n+1 layered perovskites for catalytic oxidation of toluene and methane. J Phys Chem C 120:3259–3266
Toyoshima R, Yoshida M, Monya Y, Suzuki K, Mun BS, Amemiya K, Mase K, Kondoh H (2012) Active surface oxygen for catalytic CO oxidation on Pd (100) proceeding under near ambient pressure conditions. J Phys Chem Lett 3:3182–3187
Ali S, Liu T, Lian Z, Li B, Su D (2017) The tunable effect of nitrogen and boron dopants on single walled carbon nanotube support on the catalytic properties of single gold atom catalyst: a first principles study of CO oxidation. J Mater Chem A 5:16653–16662
Han W, Tang Z, Zhang P, Lu G (2015) Fabrication of porous carbon spheres and as support for the application of low-temperature CO oxidation. Appl Surf Sci 350:100–108
Figueiredo J (2013) Functionalization of porous carbons for catalytic applications. J Mater Chem A 1:9351–9364
Zhao Y, Dong F, Han W, Zhao H, Tang Z (2017) Promotion effect of the oxygen-containing functional groups and Fe species on the Pd@graphene for CO catalytic oxidation. New J Chem 41:12052–12060
Han W, Zhang G, Zhao K, Lu G, Tang Z (2015) Surface texture and physicochemical characterization of mesoporous carbon-wrapped Pd–Fe catalysts for low-temperature CO catalytic oxidation. Phys Chem Chem Phys 17:29027–29035
Wang F, Shao S, Liu C, Xu C, Yang R, Dong W (2015) Selective oxidation of glycerol over Pt supported on mesoporous carbon nitride in base-free aqueous solution. Chem Eng J 264:336–343
Jiang S, Chen M, Wang X, Zhang Y, Huang C, Zhang Y, Wang Y (2019) Honeycomb-like nitrogen and sulfur dual-doped hierarchical porous biomass carbon bifunctional interlayer for advanced lithium-sulfur batteries. Chem Eng J 355:478–486
Kumar J, Mallampati R, Adin A, Valiyaveettil S (2014) Functionalized carbon spheres for extraction of nanoparticles and catalyst support in water. ACS Sustain Chem Eng 2:2675–2682
Osbeck S, Bradley RH, Liu C, Idriss H, Ward S (2011) Effect of an ultraviolet/ozone treatment on the surface texture and functional groups on polyacrylonitrile carbon fibres. Carbon 49:4322–4330
Zhang C, Wu H, Yuan C, Guo Z, Lou X (2012) Confining sulfur in double-shelled hollow carbon spheres for lithium–sulfur batteries. Angew Chem Int Ed 124:1–5
Lazzarini A, Piovano A, Pellegrini R, Leofanti G, Agostini G, Rudic S, Chierotti MR, Gobetto R, Battiato A, Spoto G, Zecchina A, Lambertiah C, Groppo E (2016) A comprehensive approach to investigate the structural and surface properties of activated carbons and related Pd-based catalysts. Catal Sci Technol 6:4910–4922
Zhu A, Li H, Fu S, Du D, Lin Y (2016) Highly efficient nonprecious metal catalysts towards oxygen reduction reaction based on three-dimensional porous carbon nanostructures. Chem Soc Rev 45:517–531
Wang W, Ruiz I, Lee I, Zaera F, Ozkan M, Ozkan CS (2015) Improved functionality of graphene and carbon nanotube hybrid foam architecture by UV-ozone treatment. Nanoscale 7:7045–7050
Hu Z, Liu X, Meng D, Guo Y, Guo Y, Lu G (2016) Effect of ceria crystal plane on the physicochemical and catalytic properties of Pd/ceria for CO and propane oxidation. ACS Catal 6:2265–2279
Qin J, Long Y, Wu W, Zhang W, Gao Z, Ma J (2019) Amorphous Fe2O3 improved [O] transfer cycle of Ce4+/Ce3+ in CeO2 for atom economy synthesis of imines at low temperature. J Catal 371:161–174
Zhang XD, Zhang XL, Song L, Hou FL, Yang YQ, Wang YX, Liu N (2018) Enhanced catalytic performance for CO oxidation and preferential CO oxidation over CuO/CeO2 catalysts synthesized from metal organic framework: Effects of preparation methods. Int J Hydrog Energy 43:18279–18288
Hinokuma S, Fujii H, Katsuhara Y, Ikeue K, Machida M (2014) Effect of thermal ageing on the structure and catalytic activity of Pd/CeO2 prepared using arc-plasma process. Catal Sci Technol 4:2990–2996
He C, Yu Y, Yue L, Qiao N, Li J, Shen Q, Yu W, Chen J, Hao Z (2014) Low-temperature removal of toluene and propanal over highly active mesoporous CuCeOx catalysts synthesized via a simple self-precipitation protocol. Appl Catal B 147:156–166
Zhang XD, Li HX, Hou FL, Yang Y, Dong H, Liu N, Wang YX, Cui LF (2017) Synthesis of highly efficient Mn2O3 catalysts for CO oxidation derived from Mn-MIL-100. Appl Surf Sci 411:27–33
Zhu H, Qin Z, Shan W, Shen W, Wang J (2004) Pd/CeO2–TiO2 catalyst for CO oxidation at low temperature: a TPR study with H2 and CO as reducing agents. J Catal 225:267–277
Bai BY, Arandiyan H, Li JH (2013) Comparison of the performance for oxidation of formaldehyde on nano-Co3O4, 2D-Co3O4 and 3D-Co3O4 catalysts. Appl Catal B 142–143:677–683
Barbero BP, Gamboa JA, Cadús LE (2006) Synthesis and characterisation of La1-xCaxFeO3 perovskite-type oxide catalysts for total oxidation of volatile organic compounds. Appl Catal B 65:21–30
Acknowledgements
Nuclear Medicine and Molecular Imaging Key Laboratory of Sichuan Province, Focus on cultivating subjects of Southwest Medical University, 17126.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Huang, H., Ren, W. & Shu, J. Influence of the Plasma of Pd–Ce/Porous Biomass Carbons Catalysts on the Surface Texture with Enhance Catalytic Activity Toward CO Oxidation. Catal Surv Asia 24, 156–165 (2020). https://doi.org/10.1007/s10563-020-09297-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10563-020-09297-2