A method was developed to determine power consumption in a rotor-stator impulse device having a profiled rotor with a small gap between its cover and surface. The power consumption for overcoming fluid friction in the end gaps between the coaxial annular projections in the rotor cavity and on the cover of the rotor-stator impulse device was analyzed. A major part of the power was consumed for overcoming friction in the radial gap between the rotor and the stator. Power consumption in the end gaps and for fluid swirl in the rotor cavity is an order of magnitude lower than the power consumption in the radial gap between the rotor and the stator. The calculated and experimental data on power consumption for processing biohumus (vermicompost) and gas oil for the device design with a profiled rotor and a cover were in good agreement.
Similar content being viewed by others
References
M. A. Promtov, A. Yu. Stepanov, and A. V. Aleshin, Methods of Calculation of Characteristics of Rotor Impulse Device [in Russian], Izd. FGBOU VPO “TGTU”, Tambov (2015).
Russian Federation Useful Model Patent No. 159457, Rotor Impulse Device [in Russian], claimed by M. A. Promtov, A. V. Aleshin, and M. M. Kolesnikova, published 10.02.2016, Byul., No. 4, p. 2.
Russian Federation Patent 2317142, Rotor Device [in Russian], claimed by S. A. Nagornov, V. M. Chervyakov, A. A. Koptev, and R. V. Fokin, published 20.02.2008, Byul., No. 5, p. 6.
V. M. Chernyakov and A. A. Koptev, “Determination of energy consumptions in rotor devices,” Khim. Neftegaz. Mashistr., No. 4, 10–12 (2005).
M. A. Promtov, “Calculation of key parameters of radial-type rotor impulse device,” Khim. Neftegaz. Mashistr., No. 9, 13–15 (2009).
L. Prandtl, Hydro- and Aeromechanics: Regular and Chaotic Dynamics [Russian translation from German], Izhevsk (2000).
A. A. Kukhlenko, S. E. Orlov, M. S. Vasilishin, et al., “Investigation of extraction process in a unit with a rotor pulsation device,” Polzunovsky Vestn., No. 3, 248–256 (2013).
A. A. Kukhlenko, S. E. Orlov, D. B. Ivanova, and M. S. Vasilishin, “Investigation of process of dissolution of polydisperse materials in a unit with a rotor pulsation device,” Inzh.-Fiz. Zh., 88, No. 1, 25–36 (2015).
A. K. Kurochkin and A. A. Kurochkin, “Hydroacoustic rotor cavitators, processes, and technologies: a brief catalog,” Sfera. Neft i Gaz, 69, No. 1, 102–111 (2019).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 58, No. 6, pp. 10–12, June, 2022.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Promtov, M.A., Borshchev, V.Y. & Stepanov, A.Y. Distinctictive Features of Calculation of Power of a Rotor-Stator Impulse Device with a Profiled Rotor. Chem Petrol Eng 58, 457–463 (2022). https://doi.org/10.1007/s10556-022-01114-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-022-01114-z