A comparative analysis of various designs of devices for feed input into fractionating columns was made using CFD modeling. The feed supply rate at which special feeding devices are not required was determined. A comparative estimation was made of the separation zone height and hydraulic resistance at various feed supply rates for various designs of feed input devices as well as for hollow columns (without a feed input device). The proportion of feed distillation was found to affect the performance indices of various feed input devices.
Similar content being viewed by others
References
S. K. Churakova, G. M. Sidorov, R. N. Rezyapov, and K. F. Bogatykh, “Updating fractionating equipment using crossflow packed contact devices,” Mir Nefteprod. Vestn. Neft. Komp., No. 11, 29–34 (2013).
S. K. Churakova and K. F. Bogatykh, “Development of resource-energy saving fractionation technologies based on design-technology approach,” Tekhnol. Nefti i Gaza, 87, No. 4, 8–14 (2013).
E. N. Petrashova, M. G. Lagutkin, A. S. Pushnov, and V. I. Shishov, “Development and testing of new droplets trapping devices,” Khm. Neftegaz. Mashinostr., No. 4, 22–25 (2011).
S. K. Churakova, K. F. Bogatykh, G. M. Sidorov, and R. N. Rezyapov, “Introduction of crossflow droplet traps to intensify performance of mass transfer apparatuses,” Khm. Neftegaz. Mashinostr., No. 6, 7–19 (2013).
I. D. Nesterov, K. F. Bogatykh, S. S. Khairudinova, and D. D. Ilyasov, “Detachable crossflow droplets trap for pyrolysis gas alkali cleaning column,” 56-th Sci.-Tech. Conf. Students, Graduate Students, and Young Scientists [in Russian], Izd. UGNTU, Ufa (2005), p. 98.
M. Wehrli, S. Hirschberg, and R. Schweizer, “Influence of vapour feed design on the flow distribution below packings,” I. Chem. Eng., No. 81, 116–121 (2003).
R. Cusack, “Rethink your liquid-liquid separations,” Hydrocarbon Processing, 53–60 (2009).
T. I. Mannanov, S. K. Churakova, D. V. Lesnoi, et al., “CFD analysis — a modern approach to investigation of flow separation and distribution in feed input devices of mass-transfer apparatuses,” Bulatov Readings — 2020 [in Russian], Vol. 5, 159–165, Izd. Dom Yug, Krasnodar (2020).
Russian Federation Patent 2173200, Method of Fluid Delivery into Device, Particularly into Column, and Column for Implementation of the Method [in Russian], claimed by F. Mozer, published 10.09.2001, Byul. No. 25.
Russian Federation Patent 10599, Feed Input Unit of Heat and Mass Transfer Apparatus [in Russian], claimed by L. M. Ilych, I. B. Sidorov, M. Yu. Semenistyi, et al., published 16.08.1999.
H. H. Pham, Y. I. Lim, S. Han, et al., “Hydrodynamics and design of gas distributor in large-scale amine absorbers using computational fluid dynamics,” Korean J. Chem. Eng., 35, 1073–1083 (2018).
H. Bansal, A. Sayal, P. Singh, and V. Gupta, “CFD simulation on vane type feed inlet device in a column-vapour flow analysed for two different feed streams,” Elixir Chem. Eng., No. 66, 20721–20725 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 57, No. 11, pp. 3–6, November, 2021.
Rights and permissions
About this article
Cite this article
Mannanov, T.I., Churakova, S.K. Investigation of Efficiency of Various Designs of Devices for Feed Input into Mass-Transfer Columns Using CFD Analysis. Chem Petrol Eng 57, 897–903 (2022). https://doi.org/10.1007/s10556-022-01024-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-022-01024-0