The paper presents experimental findings on thermoplastic turning with the use of advanced evacuation of a workpiece surface. The application of advanced evacuation to the outer surface of a workpiece during the turning of Capron and Teflon materials is substantiated. A new method for turning thermoplastic workpieces has been developed and patented. It is experimentally demonstrated that turning thermoplastics with advanced evacuation of the workpiece surface allows for a better-machined workpiece surface as compared with conventional turning methods.
Similar content being viewed by others
References
V. N. Poduraev, Cutting Hard-To-Machine Material: a Manual for Graduate Students [in Russian], Vysshaya Shkola, Moscow (1985).
O. Yu. Erenkov, Combined Methods of Turning Polymeric Materials [in Russian], Universitetskaya Kniga, Kursk (2021).
V. M. Yaroslavtsev, Cutting with Advanced Plastic Deformation [in Russian], BMSTU, Moscow (2010).
O. Yu. Erenkov, D. O. Yavorskii, and A. M. Kalenskii, RU Patent 2722543, IPC В 29 С 37/00, Method of Turning Thermoplastic Polymer Materials.
G. M. Bartenev, Strength and Degradation Mechanism of Polymers [in Russian], Chemistry, Moscow (1984).
E. M. Kartashov, B. Tsoi, and V. V. Shevelev, Structural and Statistical Kinetics of Polymer Degradation [in Russian], Chemistry, Moscow (2002).
L. N. Novichenok and Z. P. Shulman, Thermophysical Properties of Polymers [in Russian], Nauka i Tekhnika, Minsk (1971)
S. B. Aibinder and N. G. Andreeva, “Influence of fillers on thermophysical, mechanical, and antifriction properties of polymers,” Proc. USSR Acad. Sci., Lat.SSR, Physical and tech. sciences. Series, No. 5, 3–18 (1983).
Yu. G. Kabaldin and A. M. Shpilev, Self-Organizing Processes in Technological Cutting Systems. Testing and Management [in Russian], Dal’nauka, Vladivostok (1998).
The reported study was funded by RFBR, project number 20-08-00039.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 57, No. 6, pp. 40–42, June, 2021.
Rights and permissions
About this article
Cite this article
Erenkov, O.Y. Combined Method of Thermoplastic Turning with Advanced Workpiece Evacuation. Chem Petrol Eng 57, 513–517 (2021). https://doi.org/10.1007/s10556-021-00967-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-021-00967-0