The results of experimental studies of hydraulic resistance, heat and mass transfer characteristics of a prismatic lattice polymer regular packing for various options of its installation in space are presented. Based on the conducted experimental studies, the most rational design of packing installation was determined (taking into account the decrease in hydraulic resistance and the increase in the efficiency of heat and mass transfer processes), for which the geometric characteristics are given and empirical dependences are obtained, which make it possible to determine the value of the hydraulic resistance of the dry and irrigated packing, the values of the volumetric coefficients of mass transfer and heat transfer. The results of the study can be used in enterprises where different types of cooling towers or devices for conducting heat and (or) mass transfer processes, such as absorption, are used, as well as in the development of packed scrubbers.
Similar content being viewed by others
References
Pat. RF 2044993, F 28 F 25/00, V. A. Vitenko, V. N. Ipatov, A. N. Kuzin et al., Packing for a Heat and Mass Transfer Device [in Russian] (1995).
Pat. RF 2182302, F 28 F 25/08, F 28 C 1/00, P. F. Bulanov, V. N. Ipatov, V. S. Ponomarenko, and V. M. Sukhov, Cooling Tower Packing Block [in Russian] (2002).
V. S. Ponomarenko and Yu. I. Arefiev, Cooling Towers for Industrial and Energy Enterprises [in Russian], Energoatomizdat, Moscow (1988).
N. A. Korovina, E. Yu. Baranova, A. M. Bolotnikov, et al., “Investigation of hydraulic resistance of lattice prism stacking structures with internal inserts for biological purification of waste gases”, Advances in Science and Technology: Coll. Works of the VII Int. Sci.- Pract. Conf., Aktualnost’, Moscow (2017), pp. 62–65.
V. A. Babiev, P. M. Korovin, M. G. Lagutkin, et al., “Research of hydraulic resistance of regular packing of a new design” [in Russian], Khim Prom-st Segodnya, No. 5, 26–29 (2018).
Pat. RF No. 2586037, F 28 F 25/08, E. Yu. Baranova, A. S. Pushnov, P. I. Korovin, et al., Regular Packing for Heat and Mass Transfer Processes [in Russian] (2016).
N. P. Tsurikova, A. S. Pushnov, M. G. Lagutkin, and V. I. Shishov, “Influence of the height of the tiers in a block of regular packing on the efficiency of the process of evaporative cooling of circulating water”, Khim. Neftegaz. Mashinostr., No. 1, 4–7 (2012).
N. P. Tsurikova, Influence of the Block Height of Regular Packing on the Process of Evaporative Cooling in Fan Cooling Towers [in Russian], Dissertation, Moscow (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 57, No. 1, pp. 25–28, January, 2021.
Rights and permissions
About this article
Cite this article
Korovin, P.I., Lagutkin, M.G. & Baranova, E.Y. Study of the Hydraulic Resistance and Heat and Mass Transfer Characteristics of Prismatic Packing for Various Options of Its Installation. Chem Petrol Eng 57, 44–49 (2021). https://doi.org/10.1007/s10556-021-00892-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-021-00892-2