The problem of estimation of static strength of plunge pipe joints of industrial separator operating under an internal pressure is discussed. Linear and nonlinear static analysis of the industrial separator is carried out and the strength of the pipe joint is estimated by elastoplastic calculation. Numerical simulation is accomplished by the finite-element method in elastic and elastoplastic formulations and calculation is performed by the SAIS program developed by these authors. The results of traditional calculation are presented in conformity with Russian strength standards based on elastic stress categories prevalent in chemical engineering and nuclear industry, which give ambiguous strength estimates. An alternative approach based on nonlinear analysis methods and methods of determination of limit load, which substantiates selection of the allowable load, is proposed.
Similar content being viewed by others
References
GOST R52857.3-2007, Vessels and Equipment. Standards and Methods for Strength Analysis. Strengthening of Holes in Shells and Bottoms Subject to Internal and External Pressure [in Russian].
PNAE G-7-002-86, Norms of Strength Calculation of Equipment and Piping of Nuclear Power Plants [in Russian], Energoatomizdat, Moscow (1989), p. 525.
ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, NY (2007).
EN 13445-3:2002, Unfired Pressure Vessels, CEN European Committee for Standardization, Brussels.
A. V. Gornostaev and V. A. Freitag, “Calculation of strengthening of holes in welded cylindrical shells with respect to limit loads,” Sb. Tr. LenNIIKhIMMASH, Vopr. Prochn. Khim. Apparatury, No. 8, 174-191 (1974).
V. P. Kogaev, N. A. Makhutov, and A. P. Gusenkov, Strength and Longevity Analyses of Machine Components and Structures: A Handbook [in Russian], Mashinostroenie, Moscow (1985).
Certificate of State Registration of Program for Computer No. 2011611624 Stress Analysis in Intersecting Shells (SAIS) [in Russian], claimed by V. N. Skopinskii, N. A. Berkov, and V. V. Mikhailov, Registered in Catalog of Computer Programs 17.02.2011.
V. N. Skopinskii, Stresses in Intersecting Shells [In Russian], Fizmatgiz, Moscow (2008).
V. N. Skopinsky, N. A. Berkov, and R. A. Vogov, “Plastic limit loads for cylindrical shell intersection under combined loading,” Int. J. Pr. Vessels and Piping, 126–127, Feb.-Mar. 8-16 (2015).
V. N. Skopinsky and N. A. Berkov, “Defining the plastic limit moment for shell intersections based on a new criterion,” J. Eng. Mech., 140, I. 8, 04014054.
V. N. Skopinskij and N. A. Berkov, “Strained state of construction units in the form of intersecting shells during thermal-strength loading,” Tyazh. Mashinostr., 3, 17–19, (1992).
V. N. Skopinskii, N. A. Berkov, and N. V. Vozhova, “Elasto-plastic analysis of stresses in intersecting cylindrical shells strengthened by an overlay ring,” Khim. Neftegaz. Mashinostr., No. 4, 14–18 (2010).
V. N. Skopinskii, N. A. Berkov, and A. D. Emelyanova, “New method of determination of limit plastic load in intersecting cylindrical shells,” Khim. Neftegaz. Mashinostr., No. 1, 11–14 (2012).
I. A. Dzhemesyuk and S. G. Gorbunov, “Mathematical modeling of influence of relaxation processes on temperature field in elastic half space,” Ross. Tekhnol. Zh., 5, No. 5, 40–50 (2017).
ASME Boiler and Pressure Vessel Code, Section VIII, Division 2, NY (2007).
RCC-MR (Edition 2002), Design and Construction Rules for Mechanical Components of FBR Nuclear Islands (2003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 55, No. 11, pp. 3–8, November, 2019.
Rights and permissions
About this article
Cite this article
Berkov, N.A., Gorshunova, T.A. & Arkhangel’skii, A.I. Estimation of Static Strength of Industrial Separator Under Linear and Nonlinear Deformation of Its Structural Components. Chem Petrol Eng 55, 859–868 (2020). https://doi.org/10.1007/s10556-020-00705-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-020-00705-y