The results of testing an individual disk-type membrane-catalytic module for the production of highpurity hydrogen from methane are analyzed by the method of mathematical modeling. It is shown that the used mathematical model adequately and at a good quality level describes the experimental data known from the literature. Based on the calculations, possible ways of increasing the productivity and efficiency of high-purity hydrogen extraction from methane in a disk-type membrane-catalytic device are proposed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
F. Gallucci, E. Fernandez, P. Corengia, and M. Annaland, “Recent advances on membranes and membrane reactors for hydrogen production” (Review), Chem. Eng. Sci., 92, 40–66 (2013).
B. Dittmar, A. Behrens, N. Schödel, et al., “Methane steam reforming operation and thermal stability of new porous metal supported tubular palladium composite membranes,” Int. J. Hydrogen Energ., 38, 8759–8771 (2013).
A. Shigarov, V. Kirillov, and I. Landgraf, “Computational study of Pd-membrane CH4 steam reformer with fixed catalyst bed: Searching for a way to increase membrane efficiency,” Int. J. Hydrogen Energ., 39, No. 35, 20072–20093 (2014).
A. B. Vandyshev and V. A. Kulikov, “Analysis of parameters of high-purity hydrogen production from methane in a laboratoryscale membrane reformer with an ultrathin palladium membrane,” Chem. Petrol. Eng., 51, No. 3–4, 250–256 (2015).
A. B. Vandyshev and V. A. Kulikov, “Analysis of parameters and regimes of producing high-purity hydrogen from natural gas in membrane-catalytic devices” [in Russian], Khim. Neftegaz. Mashinostr., No. 1, 34–38 (2017).
Y. Shirasaki, T. Tsuneki, Y. Ota, et al., “Development of membrane reformer system for highly efficient hydrogen production from natural gas,” Int. J. Hydrogen Energ., 34, 4482–4487 (2009).
L. L. Muravyov, A. B. Vandyshev, and V. M. Makarov, “Modeling the process of membrane extraction of hydrogen from steam reforming products of hydrocarbons” [in Russian], Teor. Osn. Khim. Tekhnol., 33, No. 3, 286–291 (1999).
A. B. Vandyshev, “Analysis of the parameters of membrane-catalytic systems for the production of high-purity hydrogen from hydrocarbons using mathematical modeling” [in Russian], Diagnostics, Resource and Mechanics of materials and structures (DREAM open-access journal), I, No. 4, 6–46 (2016).
A. B. Vandyshev and V. A. Kulikov, “Analysis of the design parameters of a model membrane-catalytic converter for producing high-purity hydrogen from methane” [in Russian], Khim. Neftegaz. Mashinostr., No. 1, 23–27 (2018).
A. B. Shigarov, V. A. Kirillov, Y. I. Аmosov, et al., “Membrane reformer module with Ni-foam catalyst for pure hydrogen production from methane: Experimental demonstration and modeling,” Int. J. Hydrogen Energ., 42, 6713–6726 (2017).
Porous Permeable Materials [in Russian], reference book, ed. S. V. Belova, Metallurgiya, Moscow (1987) 335 p.
V. A. Kirillov, A. B. Shigarov, Yu. I. Amosov, et al., “Production of Pure Hydrogen from Diesel Fuel by Steam Pre-Reforming and Subsequent Conversion in a Membrane Reactor,” Petrol. Chem., 58, No. 2, 103–113 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 55, No. 9, pp. 19–23, September, 2019.
Rights and permissions
About this article
Cite this article
Vandyshev, A.B., Kulikov, V.A. Analysis of the Results of Testing an Individual Disk-Type Membrane-Catalytic Module for Obtaining High-Purity Hydrogen from Methane. Chem Petrol Eng 55, 725–732 (2020). https://doi.org/10.1007/s10556-020-00686-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-020-00686-y