Methods are considered for improving the quality of babbit sliding bearings by applying individual elements to their surface with electrospark alloying of soft antifriction metals. Numerical values are determined for the adhesion force between metals during formation of an antifriction layer using traditional (Fe–Sn) and suggested technology (Fe–Cu and Fe–Cu–Sn). The expediency of using an intermediate copper layer for improving sliding bearing running in is confirmed by calculation.
Similar content being viewed by others
References
V. S. Martsinkovskii, V. B. Tarel’nik, and N. V. Tarel’nik, RF patent 2422690, MPK F16C17/02, Method for sliding bearing assembly.
A. V. Chichinadze, É. M. Berliner, É. D. Braun, et al., Friction, Wear and Lubrication [in Russian], Mashinostroenie, Moscow (2003).
V. S. Martsinkovskii and V. B. Tarel’nik, RF patent 2404378 MPK B23H9/00, Method for treating bearing shells.
V. B. Tarel’nik, V. S. Martsinkovskii, and O. V. Dzyuba, Ukraine Patent 105422, IPC (2014.01), B23H 1/00, B23H 5/00, Method of improving running in of a “bearing-crankpin shaft bushing” friction pair.
V. S. Martsinkovskii and V. B. Tarel’nik, Ukrainian Patent 64663A, IPC B23H1/00, Method of treating sliding bearing shells.
V. B. Tarel’nik, V. S. Martsinkovskii, and B. Antoshevskii, Kompress. Énerg. Mashin, No. 1(3), 15–22 (2006).
V. B. Tarel’nik, V. S. Martsinkovskii, and A. Dziuba, Appl. Mech. Mater, 630, 388–396 (2014).
N. I. Lazaranko and B. P. Lazarenko, Élektron. Obrab. Materialov, No. 3, 12–16 (1977).
R. Feiman, R. Leimon, and M. Sands, Feiman Physics Lecture. Electricity and Magnetism [in Russian], Mir, Moscow (1966).
N. Ashcroft and N. Mermin, Solid Physics [Russian translation], Mir, Moscow 91979).
C. Kittel, Introduction to Solid Physics [Russian translation], Nauka. Moscow 91978).
V. E. Kuz’michev, Physics, Rules and Equations [in Russian], Naukova Dumka, Kiev (1979).
I. V. Savel’ev, General Physics Course, Vol. 2. Electricity [in Russian], Nauka, Moscow (1970).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 54, No. 8, pp. 37–40, August, 2018.
Rights and permissions
About this article
Cite this article
Tarel’nik, V.B., Martsinkovskii, V.S., Konoplyanchenko, E.V. et al. Improvement in Babbit Sliding Bearing Quality with Electrospark Alloying. Chem Petrol Eng 54, 598–604 (2018). https://doi.org/10.1007/s10556-018-0521-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-018-0521-0