A classification of the bubble caps of the contact plates of mass-transfer columnar apparatuses is proposed. The most characteristic designs of bubble caps that have been developed by domestic and foreign designers and inventors are considered.
Similar content being viewed by others
References
N. I. Gel’perin, Basic Processes and Apparatuses in Chemical Engineering [in Russian], 2 vols., Khimiya, Moscow (1981).
A. B. Tyutyunnikov, L. L. Tovazhnyanskii, and A. P. Gotlinskaya, Contact Elements of Mass-Exchange Columns [in Russian], ISIO, Kiev (1993).
V. G. Ainshtein, ed., General Course in Processes and Apparatuses in Chemical Engineering [in Russian], Part 2, Logos; Vysshaya Shkola, Moscow (2002).
I. O. Mikulenok, Mechanical, Hydromechanical, and Mass-Exchange Processes and Equipment in Chemical Engineering [in Russian], NTUU KPI, Kiev (2014).
All-Russia State Standard 9634−81. Bubble Caps of Capsular Steel Column Apparatuses. Constructions and Dimensions. Specifications [in Russian].
T. S. Ruuge, Development of Constructions of Plate-type Mass-Exchange Gas-Liquid Contact Columns: Survey Information [in Russian], TsNTIkhimneftemash, Moscow (1982), Series KhM-1: Chemical and Oil Refining Mechanical Engineering.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 54, No. 6, pp. 25−29, June, 2018.
Rights and permissions
About this article
Cite this article
Mikulenok, I.O. Designs of Bubble Caps of the Contact Plates of Mass-Exchange Columns (Review of Patents). Chem Petrol Eng 54, 410–417 (2018). https://doi.org/10.1007/s10556-018-0495-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-018-0495-y